Sada je: 27 sij 2021, 21:52.
Diskusije usko vezane uz Fedora i srodne distribucije (RHEL, CentOS...)

Moderator/ica: Moderatori/ce

Pozdrav,novi sam na linuxu i ne snalazim se jos,,,(imam ga 3 dana)


kako da si slozim pristup na wireless?

zasto nemam mogucnosti dodati ikonu baterije u tray? (trenutno je nema tamo gore pa neznam njezinu potrosnju, ali mislim da je zbog toga sto mi je slozeno acpi=off al bez toga nemogu dici nijedan linux)

zasto nemogu nista printati?
spojio sam na laptop printer hp laserjet p1005 i fedora ga prepoznala, al kada sam htio nesto printati gore u desnom kutu mi je dosla poruka da je mozda ne prikopcan printer na pc...a jeje....
kada idem na >system>administration>printing tamo imam prikazan taj printer sa zelenom kvacicom


unaprijed svima hvala na odgovorima.
OVDJE DOLJE SU VAM MOGUCI POTREBNI PODACI
Instalirana mi je Fedora 11 na laptop hp 6715s (cpu- sempron 3600+)

[xowl@localhost ~]$ lspci -k
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
Subsystem: Hewlett-Packard Company Device 30c2
00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx)
00:04.0 PCI bridge: ATI Technologies Inc Device 7914
Kernel driver in use: pcieport-driver
00:05.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1)
Kernel driver in use: pcieport-driver
00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2)
Kernel driver in use: pcieport-driver
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
Subsystem: ATI Technologies Inc SB600 Non-Raid-5 SATA
Kernel driver in use: ahci
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
Subsystem: Hewlett-Packard Company Device 30c2
Kernel driver in use: ohci_hcd
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
Subsystem: Hewlett-Packard Company Device 30c2
Kernel driver in use: ohci_hcd
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
Subsystem: Hewlett-Packard Company Device 30c2
Kernel driver in use: ohci_hcd
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
Subsystem: Hewlett-Packard Company Device 30c2
Kernel driver in use: ohci_hcd
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
Subsystem: Hewlett-Packard Company Device 30c2
Kernel driver in use: ohci_hcd
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
Subsystem: Hewlett-Packard Company Device 30c2
Kernel driver in use: ehci_hcd
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
Subsystem: Hewlett-Packard Company Device 30c2
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
Subsystem: Hewlett-Packard Company Device 30c2
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: Hewlett-Packard Company Device 30c2
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
Subsystem: Hewlett-Packard Company Device 30c2
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Kernel driver in use: k8temp
Kernel modules: k8temp
01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series]
Subsystem: Hewlett-Packard Company Device 30c2
Kernel driver in use: radeon
Kernel modules: radeon
02:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b6)
Subsystem: Hewlett-Packard Company Device 30c2
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
10:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
Subsystem: Hewlett-Packard Company Device 30c2
Kernel driver in use: tg3
Kernel modules: tg3
Postovi: 22
Postovi: 22
Pridružen/a: 04 srp 2009, 21:21
Lokacija: Cakovec
Podijelio/la zahvalu: 0 puta
Primio/la zahvalu: 0 puta
Spol: M
OS: fedora 11 mislim da GNOME
Pogledaj na naš Wiki.
Tamo imaš kako se podešavaju HP štampači.
Najvjerojatnije nemaš njegov firmware, pa ne može niti printati.
Na Wikiju ti sve piše. ;-)
Inače, Wiki ti je dobar izvor informacija za početnike, pa ga slobodno malo prouči. ;-)
Avatar
Site Admin
Postovi: 16087
Site Admin
Postovi: 16087
Pridružen/a: 03 tra 2008, 18:09
Lokacija: Svugdi me ima. Slavonija uglavnom.
Podijelio/la zahvalu: 503 puta
Primio/la zahvalu: 531 puta
Spol: M
OS: Mint 17 Cinnamon
xowl je napisao/la:Pozdrav,novi sam na linuxu i ne snalazim se jos,,,(imam ga 3 dana)


kako da si slozim pristup na wireless?

[xowl@localhost ~]$ lspci -k


Joj, pa rekao sam ti da posaljem SAMO podatke od wireless kartice (Broadcom je tvoja) a ne za sve uređaje, a ti si poslao sve OSIM broadcom wireless kartice. :misli

Pregledao sam cijeli popis uređaja, i molim da me drugi isprave ako griješim, ali ja vidim na popisu samo broadcom žičanu karticu dok ne vidim wireless karticu nigdje.

ps. upoznali smo se u Čakovcu na Slobodnom Festivalu ;) Za HP printer probaj instalirati još par paketa s ovom naredbom:
su -c 'yum install -y gutenprint-foomatic hplip gutenprint-cups foo2hiperc foo2hp foo2oak foo2slx foo2xqx foo2zjs'

A na WIKI-ju pogledaj ovaj članak pa reci da li ti je pomogao:
http://wiki.open.hr/index.php/Kategorij ... mpa%C4%8Di
Postovi: 426
Postovi: 426
Pridružen/a: 08 kol 2008, 11:00
Lokacija: Osijek
Podijelio/la zahvalu: 6 puta
Primio/la zahvalu: 14 puta
Spol: M
OS: Fedora
http://wiki.open.hr/index.php/Linux_hardver_HP_printeri
Tu imaš općenito o HP printerima, pa prouči. :-)
Inače, ne bi trebalo biti problema sa HP štampačima. Odlično su podržani pod Linuxom.
Avatar
Site Admin
Postovi: 16087
Site Admin
Postovi: 16087
Pridružen/a: 03 tra 2008, 18:09
Lokacija: Svugdi me ima. Slavonija uglavnom.
Podijelio/la zahvalu: 503 puta
Primio/la zahvalu: 531 puta
Spol: M
OS: Mint 17 Cinnamon
xowl je napisao/la:Pozdrav,novi sam na linuxu i ne snalazim se jos,,,(imam ga 3 dana)


kako da si slozim pristup na wireless?

http://fedoraproject.org/wiki/Tools/NetworkManager
I'm a Paladin with 18 charisma and 97 hit points. I can use my helm of disintegration and do one D4 damage as my half-elf mage wields his plus-five holy avenger.
Avatar
Postovi: 1407
Postovi: 1407
Pridružen/a: 31 sij 2009, 23:37
Lokacija: rijeka
Podijelio/la zahvalu: 0 puta
Primio/la zahvalu: 0 puta
OS: arch | 7
evo,,,joj pa bio je iskljucen pa ga nije registriralo..evo

0:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
Subsystem: Hewlett-Packard Company Device 30c2
Kernel driver in use: tg3
Kernel modules: tg3
30:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 02)
Subsystem: Hewlett-Packard Company BCM4311 802.11b/g Wireless LAN Controller
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
Postovi: 22
Postovi: 22
Pridružen/a: 04 srp 2009, 21:21
Lokacija: Cakovec
Podijelio/la zahvalu: 0 puta
Primio/la zahvalu: 0 puta
Spol: M
OS: fedora 11 mislim da GNOME
kaj se tice one naredbe i printera evo ..dobio sam opet error...

[xowl@localhost ~]$ su -c 'yum install -y gutenprint-foomatic hplip gutenprint-cups foo2hiperc foo2hp foo2oak foo2slx foo2xqx foo2zjs'
Password:
Loaded plugins: presto, refresh-packagekit, remove-with-leaves
livna | 2.4 kB 00:00
rpmfusion-free-updates | 3.8 kB 00:00
rpmfusion-nonfree-updates | 3.8 kB 00:00
updates/metalink | 19 kB 00:00
Setting up Install Process
Package gutenprint-foomatic-5.2.3-5.fc11.i586 already installed and latest version
Package foo2hiperc-0.20080826-3.fc11.i586 already installed and latest version
Package foo2hp-0.20080826-3.fc11.i586 already installed and latest version
Package foo2slx-0.20080826-3.fc11.i586 already installed and latest version
Package foo2xqx-0.20080826-3.fc11.i586 already installed and latest version
Package foo2zjs-0.20080826-3.fc11.i586 already installed and latest version
Resolving Dependencies
--> Running transaction check
---> Package foo2oak.i586 0:0.20080826-3.fc11 set to be updated
---> Package gutenprint-cups.i586 0:5.2.3-5.fc11 set to be updated
---> Package hplip.i586 0:3.9.2-4.fc11 set to be updated
--> Processing Dependency: hpijs = 1:3.9.2-4.fc11 for package: hplip-3.9.2-4.fc11.i586
--> Running transaction check
---> Package hpijs.i586 1:3.9.2-4.fc11 set to be updated
--> Processing Dependency: python-reportlab for package: 1:hpijs-3.9.2-4.fc11.i586
--> Processing Dependency: net-snmp for package: 1:hpijs-3.9.2-4.fc11.i586
--> Running transaction check
---> Package net-snmp.i586 1:5.4.2.1-12.fc11 set to be updated
---> Package python-reportlab.noarch 0:2.1-4.fc11 set to be updated
--> Finished Dependency Resolution

Dependencies Resolved

================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
foo2oak i586 0.20080826-3.fc11 rpmfusion-free 200 k
gutenprint-cups i586 5.2.3-5.fc11 fedora 377 k
hplip i586 3.9.2-4.fc11 fedora 6.6 M
Installing for dependencies:
hpijs i586 1:3.9.2-4.fc11 fedora 1.6 M
net-snmp i586 1:5.4.2.1-12.fc11 updates 305 k
python-reportlab noarch 2.1-4.fc11 fedora 1.8 M

Transaction Summary
================================================================================
Install 6 Package(s)
Update 0 Package(s)
Remove 0 Package(s)

Total download size: 11 M
Downloading Packages:
Setting up and reading Presto delta metadata
Processing delta metadata
Package(s) data still to download: 11 M
(1/6): foo2oak-0.20080826-3.fc11.i586.rpm | 200 kB 00:00
(2/6): gutenprint-cups-5.2.3-5.fc11.i586.rpm | 377 kB 00:00
(3/6): hpijs-3.9.2-4.fc11.i586.rpm | 1.6 MB 00:04
(4/6): hplip-3.9.2-4.fc11.i586.rpm | 6.6 MB 00:17
(5/6): net-snmp-5.4.2.1-12.fc11.i586.rpm | 305 kB 00:00
(6/6): python-reportlab-2.1-4.fc11.noarch.rpm | 1.8 MB 00:04
--------------------------------------------------------------------------------
Total 358 kB/s | 11 MB 00:31
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test


Transaction Check Error:
file /usr/share/foomatic/db/source/printer/HP-Color_LaserJet_1500.xml from install of foo2oak-0.20080826-3.fc11.i586 conflicts with file from package foomatic-4.0.0-2.fc11.i586

Error Summary
-------------
Postovi: 22
Postovi: 22
Pridružen/a: 04 srp 2009, 21:21
Lokacija: Cakovec
Podijelio/la zahvalu: 0 puta
Primio/la zahvalu: 0 puta
Spol: M
OS: fedora 11 mislim da GNOME
evo da jos dodam,,,, ucinio sam sve kako je pisalo na open.wiki ono za printere i instalirao kako pise....i sada imam taj hplip... i opet ga prepozna i sve,,, al ne printa....
Postovi: 22
Postovi: 22
Pridružen/a: 04 srp 2009, 21:21
Lokacija: Cakovec
Podijelio/la zahvalu: 0 puta
Primio/la zahvalu: 0 puta
Spol: M
OS: fedora 11 mislim da GNOME
xowl je napisao/la:evo da jos dodam,,,, ucinio sam sve kako je pisalo na open.wiki ono za printere i instalirao kako pise....i sada imam taj hplip... i opet ga prepozna i sve,,, al ne printa....

A jesi napravio:
Kod: Označi sve
su -c 'hp-setup'

Ako nisi, iskopiraj tu naredbu u terminal.
Dobiti ćeš jedan mali program koji će ti na jednom mjestu ponuditi da učita firmware s neta.
Kad ga učita s neta, ubaciti će ga u printer i trebali bi raditi.
EDIT:Sad sam probao na svojoj Fedori (Gnome) Ako imaš Gnome, ne možeš dobiti hp-setup kao GUI. Ako koristiš KDE, ne bi trebao imati problema.
Za Gnome (ako ti javi grešku da treba GUI support) imaš naredbu:
Kod: Označi sve
su -c 'hp-setup -i'

Pa prati upute s ekrana.
Ajde javi kako je islo.
Inače, Fedora ti je odlična distra, ali nije baš za potpune početnike. Morati ćeš se malo pomučiti da sve podesiš. Ali, ako budeš imao živaca dok ti sve podesimo, biti ćeš s njom jako zadovoljan.
A što se tiče wirelessa daj za početak vidi da li dobiješ wlan0 kad upišeš
Kod: Označi sve
ifconfig

Pa ćemo vidjeti dalje.
Ajde, držim fige da printer proradi.
EDIT:Nadopiši u profilu uz Fedora 11 koje sučelje koristiš. Da li je KDE, ili Gnome.
Avatar
Site Admin
Postovi: 16087
Site Admin
Postovi: 16087
Pridružen/a: 03 tra 2008, 18:09
Lokacija: Svugdi me ima. Slavonija uglavnom.
Podijelio/la zahvalu: 503 puta
Primio/la zahvalu: 531 puta
Spol: M
OS: Mint 17 Cinnamon
evo sto se desi na ifconfig(wireless)
[xowl@localhost ~]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:1A:4B:5E:65:C3
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21a:4bff:fe5e:65c3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6658 errors:0 dropped:0 overruns:0 frame:0
TX packets:6775 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6106754 (5.8 MiB) TX bytes:1474875 (1.4 MiB)
Interrupt:10

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:480 (480.0 b) TX bytes:480 (480.0 b)







A ovo sam vec prosao jucer,,,i uz to ne radi printer ([xowl@localhost ~]$ su -c 'hp-setup)

i da jos pitam u desnom kutu kada ukljucim printer mi javlja neki SELinux

a kad kliknem na to dobivam ovako nesto...

SummarySELinux is preventing python (hplip_t) "read" var_lib_t. Detailed DescriptionSELinux denied access requested by python. It is not expected that this access is required by python and this access may signal an intrusion attempt. It is also possible that the specific version or configuration of the application is causing it to require additional access. Allowing AccessYou can generate a local policy module to allow this access - see FAQ Or you can disable SELinux protection altogether. Disabling SELinux protection is not recommended. Please file a bug report against this package. Additional InformationSource Context:  system_u:system_r:hplip_t:s0Target Context:  system_u:object_r:var_lib_t:s0Target Objects:  hplip.state [ file ]Source:  pythonSource Path:  /usr/bin/pythonPort:  <Unknown>Host:  localhost.localdomainSource RPM Packages:  python-2.6-9.fc11Target RPM Packages:  Policy RPM:  selinux-policy-3.6.12-53.fc11Selinux Enabled:  TruePolicy Type:  targetedMLS Enabled:  TrueEnforcing Mode:  EnforcingPlugin Name:  catchallHost Name:  localhost.localdomainPlatform:  Linux localhost.localdomain 2.6.29.5-191.fc11.i686.PAE #1 SMP Tue Jun 16 23:19:53 EDT 2009 i686 athlonAlert Count:  7First Seen:  Tue 07 Jul 2009 12:52:02 AM CESTLast Seen:  Tue 07 Jul 2009 10:51:40 AM CESTLocal ID:  a22c3432-4b3b-4852-a158-378c836bfc70Line Numbers:  Raw Audit Messages :node=localhost.localdomain type=AVC msg=audit(1246956700.438:24): avc: denied { read } for pid=2418 comm="python" name="hplip.state" dev=dm-0 ino=392678 scontext=system_u:system_r:hplip_t:s0 tcontext=system_u:object_r:var_lib_t:s0 tclass=file node=localhost.localdomain type=SYSCALL msg=audit(1246956700.438:24): arch=40000003 syscall=5 success=no exit=-13 a0=9a97320 a1=8000 a2=1b6 a3=0 items=0 ppid=2385 pid=2418 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="python" exe="/usr/bin/python" subj=system_u:system_r:hplip_t:s0 key=(null)


Nadalje zanima me zasto sada kada imam zicano slozen net,,,zasto se jdnostavno deaktivira nakon kojih pola do sat vremena i onda jedino mogu dobit net natrag ako napravim reboot i zabrinjava me sporost...mnogo puta cek po dulje vrijeme,,, a zanimljivo mi je sto trosi manje resursa od windowsi a ne radi bolje ... : /
Postovi: 22
Postovi: 22
Pridružen/a: 04 srp 2009, 21:21
Lokacija: Cakovec
Podijelio/la zahvalu: 0 puta
Primio/la zahvalu: 0 puta
Spol: M
OS: fedora 11 mislim da GNOME

Na mreži
Trenutno korisnika/ca: / i 1 gost.