Linux za Sve forum

posto znam da ima ljudi koji su svasta prikljucivali i svasta probali da vidim jel neko zna easy way posto nisam radio
ako niko nezna google is my friend
evo lsusb
scheissman@9krugpakla ~ $ lsusb
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 04f2:b1e5 Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 14aa:0620 AVerMedia (again) or C&E
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
scheissman@9krugpakla ~ $

jel to neko upogonio pod nixom , koji programi se koriste za search i gledanje programa itd itd

Evo, tu si malo čitaj. Pričaju o tvojoj kartici, možda kaj pametnog saznaš. Izlgeda da joj treba Tridentov driver:

http://forum.eeeuser.com/index.php?/top ... ge__st__60

strasne komplikacije
to je ono kad se nerviras u vezi nixA

scheissman je napisao/la:strasne komplikacije
to je ono kad se nerviras u vezi nixA

Da, kada radi, radi vrhunski, ali kada ne radi, isto tako NE radi vrhunski

Grof je napisao/la:

scheissman je napisao/la:strasne komplikacije
to je ono kad se nerviras u vezi nixA

Da, kada radi, radi vrhunski, ali kada ne radi, isto tako NE radi vrhunski

bash:) tako , dobio sam na poklon dvbt tuner i sad ak ocu gledat tv moram install xp / za 7 isto nema drivera a kad probas drivcer od xp-a instalirat onda ti u 7ici obrise cd rom drivere i disable cd rom , cim sam to vidio odmah sam znao da nece biti srece u nixu /

prodaj to i kupi novo. Avermedia ima uređaje koji su službeno podržani pod Linuxom.

Nisam htio otvarati novu temu kada postoji ova, ali imam proble:

Imam Avermediju Volar HD Pro(?), lsusb prepoznaje tuner bez ikakvih postavki i radnji, ali ne mogu MythTV ne daje nikakvu sliku. Naišao sam na ove upute: http://wiki.open.hr/wiki/Hardver:AVerMe ... lar_HD_Pro

Problem je što nakon raspakiravanja arhive ne mogu naći mapu u kojoj bi trebao pokrenuti ./build Preuzeta verzija je v4l-utils-0.9.3. Problem je točka 2: http://wiki.open.hr/wiki/Hardver:AVerMe ... ije_od_3.5

Postoji neka configure datoteka i nju mogu poreknuti s ./configure, ali nakon nekog vreman javi da postoji greška - ne može pronaći jpeglib verziju (barem) 6. Imam instalirano libjpeg62. Ovo je output nakon ./configure:

Kod: Označi sve

checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu format... func_convert_file_noop
checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether ln -s works... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for mode_t... yes
checking for promoted mode_t type... mode_t
checking for simple visibility declarations... yes
checking sys/klog.h usability... yes
checking sys/klog.h presence... yes
checking for sys/klog.h... yes
checking for klogctl... yes
checking for X11... no
checking jpeglib.h usability... no
checking jpeglib.h presence... no
checking for jpeglib.h... no
configure: error: cannot find jpeglib.h


Firmwire sam preuzeo i stoji u /lib/firmwire, stik je prepoznat (lsusb) i sam od sebe, bez ikakvih dodatnih postavki, ali nije upotrebljiv. Problem je samo u tom v4l - datoteke i mape dostupne u raspakiranom arhivi su:

Kod: Označi sve

ABOUT-NLS
configure
INSTALL
README.lib
aclocal.m4
configure.ac
lib
README.lib-multi-threading
build-aux
contrib
m4
TODO
ChangeLog
COPYING       
Makefile.am 
utils
config.h.in 
COPYING.LIB   
Makefile.in 
v4l-utils.spec.in
config.log   
include
README


A jesi probao s Kaffeineom?

Koji kernel koristiš?

Kod: Označi sve

uname -a

Pogledaj sa dmesg izbaci li poruku pri uključivanju sticka (kao u 4. koraku na wikiju)

Kod: Označi sve

DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...

Ako da, probaj Kaffeine kao što Suko kaže.


Ako ne, jesi napravio u prvom koraku

Zaustavimo buildanje kada se počnu pojavljivati redci sa "CC".

blacx je napisao/la:Koji kernel koristiš?

Kod: Označi sve

uname -a

Linux debian 2.6.32-5-686 #1 SMP Mon Feb 25 01:04:36 UTC 2013 i686 GNU/Linux

blacx je napisao/la:Pogledaj sa dmesg izbaci li poruku pri uključivanju sticka (kao u 4. koraku na wikiju)

Kod: Označi sve

DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...

Kod: Označi sve

[ 5293.724571] usb 1-1: new high speed USB device using ehci_hcd and address 8
[ 5293.861806] usb 1-1: New USB device found, idVendor=07ca, idProduct=a835
[ 5293.861811] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5293.861815] usb 1-1: Product: A835
[ 5293.861817] usb 1-1: Manufacturer: AVerMedia TECHNOLOGIES, Inc
[ 5293.861820] usb 1-1: SerialNumber: 3036436017360
[ 5293.861955] usb 1-1: configuration #1 chosen from 1 choice



lsusb daje:

Kod: Označi sve

Bus 001 Device 008: ID 07ca:a835 AVerMedia Technologies, Inc.

blacx je napisao/la:Ako ne, jesi napravio u prvom koraku

Zaustavimo buildanje kada se počnu pojavljivati redci sa "CC".

Nikad nisam di došo do bildanja, nema mape u koju bi trebo zać i započet bildanje u mojoj verziji v4l-a. Možda nešto nisam dobro shvatio?

S Kaffeineom nisam probao jer nisam ni znao za njega. Probat ću ga preuzet pa vidjet. Buni me samo to što nakov otpakiravanja v4l-a, nema tražene mape, odnosno ne znam ga izbildat.