Sada je: 20 ruj 2020, 06:18.
Linux, poslužitelj, mreže i sigurnost

Moderator/ica: Moderatori/ce

na drugom linku pise da trebas deinstalirati taj bt-dw1705-firmware da bi mogla instalirati linux-firmware pa mozes sada samo pokusati ponovo instalirati preko synaptica taj linux-firmware ili mozes kako jura kaze probati...
Nije teško biti toliko nesrećan da bi čovek počeo da pije. Ljude treba odvikavati od nesreće, a ne od alkohola. Nesreća je veći porok.
Avatar
Postovi: 9934
Postovi: 9934
Pridružen/a: 12 tra 2008, 22:45
Lokacija: Split
Podijelio/la zahvalu: 7 puta
Primio/la zahvalu: 71 puta
Spol: M
OS: KDE Neon
Kod: Označi sve
Initializing nautilus-gdu extension
totem-video-thumbnailer couldn't open file 'file:///lib/firmware/v4l-cx2341x-init.mpg'
Reason: Could not determine type of stream..



aaaaaaaaaaaaaaaaaaaa???? :place
Postovi: 49
Postovi: 49
Pridružen/a: 25 tra 2014, 13:16
Podijelio/la zahvalu: 6 puta
Primio/la zahvalu: 3 puta
Spol: Ž
OS: Ubuntu 12.04 LTS
znači maknula sam ga iz synaptica i napravila update instalacju oonuđenog firmwarea ( o kojem sam prije pisala da mi se nije htio updatati). nakon restarta više mi update manager ne nudi tu instalaciju, pa pretpostavljam da je učinjena. međutim wireless i dalje ne radi, u biti nema ga, gore u desnom kutu desktopa je samo vpn i wired i to je to.

ovo kaj jura predlaže sam napisala na stranici 3-ne kužim koji folder da prebacim jer folder koji sam otpakirala poda nazivom firmware se neće sam prekopirati nego kad klinem na njega otvori opet hrpu podfoldera. mogu reći da sam su "stuck" i ne znam kaj sad. možda je ot vama :lulz , ali meni je :( i :? . sorry na ovakvom prikazu, ali više ne znam kaj da napišem.


zole052 je napisao/la:na drugom linku pise da trebas deinstalirati taj bt-dw1705-firmware da bi mogla instalirati linux-firmware pa mozes sada samo pokusati ponovo instalirati preko synaptica taj linux-firmware ili mozes kako jura kaze probati...
Postovi: 49
Postovi: 49
Pridružen/a: 25 tra 2014, 13:16
Podijelio/la zahvalu: 6 puta
Primio/la zahvalu: 3 puta
Spol: Ž
OS: Ubuntu 12.04 LTS
Kad skineš linux_firmware_taitaj.tar.gz, otvori ga i otpakiraj taj folder "firmware" recimo na desktop onda otvori nautilus kako sam napisao i samo prebaci čitavi folder sa desktopa u /lib.
Avatar
Postovi: 1908
Postovi: 1908
Pridružen/a: 16 tra 2011, 08:34
Lokacija: i grupa Film
Podijelio/la zahvalu: 45 puta
Primio/la zahvalu: 341 puta
Spol: M
OS: Mint 10 LXDE itd...
wth... am i doing wrong???
Kod: Označi sve
gksudo nautilus /lib
-Inspiron-3537:~$ /lib/'/home/manuela/Desktop/linux-firmware'
bash: /lib//home/manuela/Desktop/linux-firmware: No such file or directory
Postovi: 49
Postovi: 49
Pridružen/a: 25 tra 2014, 13:16
Podijelio/la zahvalu: 6 puta
Primio/la zahvalu: 3 puta
Spol: Ž
OS: Ubuntu 12.04 LTS
Kod: Označi sve
manuela@manuela-Inspiron-3537:~$ gksudo nautilus /lib
manuela@manuela-Inspiron-3537:~$ /lib/'/home/manuela/Desktop/linux-firmware'
bash: /lib//home/manuela/Desktop/linux-firmware: No such file or directory
manuela@manuela-Inspiron-3537:~$ ^C
manuela@manuela-Inspiron-3537:~$ gksudo nautilus /lib
'/lib/firmware' manuela@manuela-Inspiron-3537:~$ '/lib/firmware'
bash: /lib/firmware: Is a directory
manuela@manuela-Inspiron-3537:~$ '/lib/firmware'
bash: /lib/firmware: Is a directory
manuela@manuela-Inspiron-3537:~$


hm???
Postovi: 49
Postovi: 49
Pridružen/a: 25 tra 2014, 13:16
Podijelio/la zahvalu: 6 puta
Primio/la zahvalu: 3 puta
Spol: Ž
OS: Ubuntu 12.04 LTS
:-D da vidimo tko će prvo poluditi, vi ili ja? očito nešto radim krivo :zvizdi
Postovi: 49
Postovi: 49
Pridružen/a: 25 tra 2014, 13:16
Podijelio/la zahvalu: 6 puta
Primio/la zahvalu: 3 puta
Spol: Ž
OS: Ubuntu 12.04 LTS
u biti ja ne znam niti dali trebam to raditi na ovaj način ako sam slijedila one upute od deinstalacije u synaptisu, jel sada kada odem na njega i u pretraživač utipkam firmware, zeleni kutić mi je za linux-firmware, firmware-b43-installer i b43-fwcutter? ne znam jel vam to kaj znači?
Postovi: 49
Postovi: 49
Pridružen/a: 25 tra 2014, 13:16
Podijelio/la zahvalu: 6 puta
Primio/la zahvalu: 3 puta
Spol: Ž
OS: Ubuntu 12.04 LTS
Odoste predaleko...
@Mana ako već nisi pogledaj ovaj post, sličan problem:
viewtopic.php?f=8&t=11545#p213489 (samo nzm koja je kartica u pitanju)
Problem je što u novi kernel (nakon update) nije uključen modul za ath9k.
Avatar
Postovi: 1801
Postovi: 1801
Pridružen/a: 15 sij 2014, 09:37
Lokacija: Zaljev svetaca
Podijelio/la zahvalu: 69 puta
Primio/la zahvalu: 177 puta
Spol:
OS: Leap 15.1 / Hera 5.1
evo što kaže nakon lspci, lsmod i dmesg
Kod: Označi sve
 0.699368] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.699465] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.699485] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.699497] pnp 00:04: [io  0x002e-0x002f]
[    0.699499] pnp 00:04: [io  0x004e-0x004f]
[    0.699500] pnp 00:04: [io  0x0061]
[    0.699502] pnp 00:04: [io  0x0063]
[    0.699504] pnp 00:04: [io  0x0065]
[    0.699506] pnp 00:04: [io  0x0067]
[    0.699508] pnp 00:04: [io  0x0068]
[    0.699509] pnp 00:04: [io  0x006c]
[    0.699511] pnp 00:04: [io  0x0070]
[    0.699513] pnp 00:04: [io  0x0080]
[    0.699514] pnp 00:04: [io  0x0092]
[    0.699516] pnp 00:04: [io  0x00b2-0x00b3]
[    0.699518] pnp 00:04: [io  0x0680-0x069f]
[    0.699520] pnp 00:04: [io  0xfd60-0xfd63]
[    0.699523] pnp 00:04: [io  0xffff]
[    0.699525] pnp 00:04: [io  0xffff]
[    0.699527] pnp 00:04: [io  0xffff]
[    0.699529] pnp 00:04: [io  0x1800-0x18fe]
[    0.699531] pnp 00:04: [io  0x164e-0x164f]
[    0.699572] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.699575] system 00:04: [io  0xfd60-0xfd63] has been reserved
[    0.699577] system 00:04: [io  0xffff] has been reserved
[    0.699579] system 00:04: [io  0xffff] has been reserved
[    0.699582] system 00:04: [io  0xffff] has been reserved
[    0.699584] system 00:04: [io  0x1800-0x18fe] has been reserved
[    0.699586] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.699589] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.699616] pnp 00:05: [io  0x0070-0x0077]
[    0.699629] pnp 00:05: [irq 8]
[    0.699649] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.699675] pnp 00:06: [io  0x1854-0x1857]
[    0.699712] system 00:06: [io  0x1854-0x1857] has been reserved
[    0.699715] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.699740] pnp 00:07: [io  0x0060]
[    0.699741] pnp 00:07: [io  0x0064]
[    0.699749] pnp 00:07: [irq 1]
[    0.699802] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.699820] pnp 00:08: [irq 12]
[    0.699842] pnp 00:08: Plug and Play ACPI device, IDs DLL05eb PNP0f13 (active)
[    0.756450] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    0.756452] pnp 00:09: [mem 0xfed10000-0xfed17fff]
[    0.756454] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[    0.756456] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[    0.756457] pnp 00:09: [mem 0xe0000000-0xefffffff]
[    0.756459] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[    0.756461] pnp 00:09: [mem 0xfed90000-0xfed93fff]
[    0.756463] pnp 00:09: [mem 0xff000000-0xff000fff]
[    0.756465] pnp 00:09: [mem 0xff010000-0xffffffff]
[    0.756467] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[    0.756468] pnp 00:09: [mem 0x9fa22000-0x9fa22fff]
[    0.756470] pnp 00:09: [mem 0x9fa10000-0x9fa1ffff]
[    0.756513] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.756515] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.756518] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.756520] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.756522] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.756525] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.756527] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.756529] system 00:09: [mem 0xff000000-0xff000fff] has been reserved
[    0.756532] system 00:09: [mem 0xff010000-0xffffffff] could not be reserved
[    0.756534] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.756536] system 00:09: [mem 0x9fa22000-0x9fa22fff] has been reserved
[    0.756539] system 00:09: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[    0.756542] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.757160] pnp: PnP ACPI: found 10 devices
[    0.757162] ACPI: ACPI bus type pnp unregistered
[    0.763284] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    0.763287] pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    0.763322] pci 0000:00:1c.3: BAR 15: assigned [mem 0x9fb00000-0x9fbfffff pref]
[    0.763326] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.763329] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.763334] pci 0000:00:1c.0:   bridge window [mem 0xc0700000-0xc07fffff]
[    0.763338] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[    0.763346] pci 0000:02:00.0: BAR 6: assigned [mem 0x9fb00000-0x9fb0ffff pref]
[    0.763348] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[    0.763353] pci 0000:00:1c.3:   bridge window [mem 0xc0600000-0xc06fffff]
[    0.763357] pci 0000:00:1c.3:   bridge window [mem 0x9fb00000-0x9fbfffff pref]
[    0.763364] pci 0000:03:00.0: BAR 6: assigned [mem 0xc0540000-0xc055ffff pref]
[    0.763366] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[    0.763369] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.763374] pci 0000:00:1c.4:   bridge window [mem 0xc0500000-0xc05fffff]
[    0.763378] pci 0000:00:1c.4:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.763422] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.763424] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.763426] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.763428] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[    0.763431] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.763433] pci_bus 0000:01: resource 1 [mem 0xc0700000-0xc07fffff]
[    0.763435] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
[    0.763437] pci_bus 0000:02: resource 1 [mem 0xc0600000-0xc06fffff]
[    0.763439] pci_bus 0000:02: resource 2 [mem 0x9fb00000-0x9fbfffff pref]
[    0.763441] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.763443] pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff]
[    0.763446] pci_bus 0000:03: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[    0.763477] NET: Registered protocol family 2
[    0.763607] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.764373] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.766041] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.766248] TCP: Hash tables configured (established 524288 bind 65536)
[    0.766250] TCP: reno registered
[    0.766265] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.766286] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.766358] NET: Registered protocol family 1
[    0.766372] pci 0000:00:02.0: Boot video device
[    0.767181] pci 0000:00:14.0: power state changed by ACPI to D0
[    0.767188] pci 0000:00:14.0: power state changed by ACPI to D0
[    0.784318] PCI: CLS 64 bytes, default 64
[    0.784324] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.784327] software IO TLB [mem 0x96abd000-0x9aabcfff] (64MB) mapped at [ffff880096abd000-ffff88009aabcfff]
[    0.784364] Simple Boot Flag at 0x44 set to 0x1
[    0.784832] audit: initializing netlink socket (disabled)
[    0.784841] type=2000 audit(1398501211.668:1): initialized
[    0.816784] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.818379] VFS: Disk quotas dquot_6.5.2
[    0.818420] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.818875] fuse init (API version 7.19)
[    0.818946] msgmni has been set to 7678
[    0.819249] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.819273] io scheduler noop registered
[    0.819276] io scheduler deadline registered (default)
[    0.819300] io scheduler cfq registered
[    0.819426] pcieport 0000:00:1c.0: irq 58 for MSI/MSI-X
[    0.819523] pcieport 0000:00:1c.3: irq 59 for MSI/MSI-X
[    0.819615] pcieport 0000:00:1c.4: irq 60 for MSI/MSI-X
[    0.819690] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.819693] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.819697] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.819712] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.819714] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.819718] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.819731] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.819733] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.819737] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.819749] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.819764] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.819804] intel_idle: does not run on family 6 model 69
[    0.819880] ACPI: AC Adapter [ACAD] (on-line)
[    0.819978] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input0
[    0.820006] ACPI: Lid Switch [LID0]
[    0.820040] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input1
[    0.820044] ACPI: Power Button [PWRB]
[    0.820085] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.820088] ACPI: Power Button [PWRF]
[    0.820166] ACPI: Requesting acpi_cpufreq
[    0.820759] Monitor-Mwait will be used to enter C-1 state
[    0.820764] Monitor-Mwait will be used to enter C-2 state
[    0.820770] ACPI: acpi_idle registered with cpuidle
[    0.942654] ACPI: Battery Slot [BAT1] (battery present)
[    0.942688] GHES: HEST is not enabled!
[    0.942757] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.943895] Linux agpgart interface v0.103
[    0.945084] brd: module loaded
[    0.945677] loop: module loaded
[    0.945983] Fixed MDIO Bus: probed
[    0.946020] tun: Universal TUN/TAP device driver, 1.6
[    0.946022] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.946055] PPP generic driver version 2.4.2
[    0.946096] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.946142] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.946145] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    0.946151] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.946177] ehci_hcd 0000:00:1d.0: debug port 2
[    0.950048] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    0.950065] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc081c000
[    0.960080] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.960102] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.960104] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.960106] usb usb1: Product: EHCI Host Controller
[    0.960108] usb usb1: Manufacturer: Linux 3.5.0-49-generic ehci_hcd
[    0.960110] usb usb1: SerialNumber: 0000:00:1d.0
[    0.960214] hub 1-0:1.0: USB hub found
[    0.960218] hub 1-0:1.0: 2 ports detected
[    0.960278] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.960292] uhci_hcd: USB Universal Host Controller Interface driver
[    0.960312] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[    0.960316] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[    0.960345] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    0.960348] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.960353] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.960430] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.960470] xhci_hcd 0000:00:14.0: irq 61 for MSI/MSI-X
[    0.960512] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.960514] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.960516] usb usb2: Product: xHCI Host Controller
[    0.960518] usb usb2: Manufacturer: Linux 3.5.0-49-generic xhci_hcd
[    0.960520] usb usb2: SerialNumber: 0000:00:14.0
[    0.960594] xHCI xhci_add_endpoint called for root hub
[    0.960596] xHCI xhci_check_bandwidth called for root hub
[    0.960621] hub 2-0:1.0: USB hub found
[    0.960630] hub 2-0:1.0: 9 ports detected
[    0.960688] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.960692] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.960710] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    0.960713] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.960714] usb usb3: Product: xHCI Host Controller
[    0.960716] usb usb3: Manufacturer: Linux 3.5.0-49-generic xhci_hcd
[    0.960718] usb usb3: SerialNumber: 0000:00:14.0
[    0.960780] xHCI xhci_add_endpoint called for root hub
[    0.960782] xHCI xhci_check_bandwidth called for root hub
[    0.960802] hub 3-0:1.0: USB hub found
[    0.960808] hub 3-0:1.0: 4 ports detected
[    0.960918] usbcore: registered new interface driver libusual
[    0.960953] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.998700] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.998706] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.998829] mousedev: PS/2 mouse device common for all mice
[    1.000627] rtc_cmos 00:05: RTC can wake from S4
[    1.000754] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.000782] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.000850] device-mapper: uevent: version 1.0.3
[    1.000914] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.000973] cpuidle: using governor ladder
[    1.001040] cpuidle: using governor menu
[    1.001042] EFI Variables Facility v0.08 2004-May-17
[    1.001218] ashmem: initialized
[    1.001333] TCP: cubic registered
[    1.001431] NET: Registered protocol family 10
[    1.001591] NET: Registered protocol family 17
[    1.001601] Key type dns_resolver registered
[    1.001727] PM: Hibernation image not present or could not be loaded.
[    1.001737] registered taskstats version 1
[    1.003871] Key type trusted registered
[    1.005843] Key type encrypted registered
[    1.012957]   Magic number: 10:816:574
[    1.013080] rtc_cmos 00:05: setting system clock to 2014-04-26 08:33:32 UTC (1398501212)
[    1.014144] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.014146] EDD information not available.
[    1.024847] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.151920] [Firmware Bug]: battery: (dis)charge rate invalid.
[    1.151953] ACPI: Battery Slot [BAT1] (battery present)
[    1.153822] Freeing unused kernel memory: 952k freed
[    1.153944] Write protecting the kernel read-only data: 12288k
[    1.158755] Freeing unused kernel memory: 1348k freed
[    1.162862] Freeing unused kernel memory: 1060k freed
[    1.179466] udevd[101]: starting version 175
[    1.197988] Btrfs loaded
[    1.207871] xor: automatically using best checksumming function:
[    1.231827] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.231893] r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default
[    1.231963] r8169 0000:01:00.0: irq 62 for MSI/MSI-X
[    1.232187] r8169 0000:01:00.0: eth0: RTL8101e at 0xffffc90000650000, ec:f4:bb:81:12:d5, XID 04900000 IRQ 62
[    1.240673] ahci 0000:00:1f.2: version 3.0
[    1.240749] ahci 0000:00:1f.2: irq 63 for MSI/MSI-X
[    1.247709]    avx       : 11615.000 MB/sec
[    1.248278] device-mapper: dm-raid45: initialized v0.2594b
[    1.255827] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl SATA mode
[    1.255835] ahci 0000:00:1f.2: flags: 64bit ncq led clo only pio slum part apst
[    1.255841] ahci 0000:00:1f.2: setting latency timer to 64
[    1.256306] scsi0 : ahci
[    1.256489] scsi1 : ahci
[    1.257575] scsi2 : ahci
[    1.257819] ata1: SATA max UDMA/133 abar m2048@0xc081b000 port 0xc081b100 irq 63
[    1.257824] ata2: SATA max UDMA/133 abar m2048@0xc081b000 port 0xc081b180 irq 63
[    1.257827] ata3: DUMMY
[    1.271737] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.403976] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[    1.403981] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.404360] hub 1-1:1.0: USB hub found
[    1.404425] hub 1-1:1.0: 8 ports detected
[    1.575363] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.575383] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.578183] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A100, max UDMA/100
[    1.582987] ata2.00: configured for UDMA/100
[    1.601911] ata1.00: ATA-8: ST500LT012-1DG142, 0001SDM1, max UDMA/133
[    1.601915] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.640848] ata1.00: configured for UDMA/133
[    1.641063] scsi 0:0:0:0: Direct-Access     ATA      ST500LT012-1DG14 0001 PQ: 0 ANSI: 5
[    1.641258] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.641264] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.641278] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.641347] sd 0:0:0:0: [sda] Write Protect is off
[    1.641352] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.641382] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.675340] usb 1-1.5: new full-speed USB device number 3 using ehci_hcd
[    1.700919]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    1.701561] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.703345] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GU90N    A100 PQ: 0 ANSI: 5
[    1.708895] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.708899] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.709055] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.709274] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.768227] usb 1-1.5: New USB device found, idVendor=0cf3, idProduct=0036
[    1.768238] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.783066] Refined TSC clocksource calibration: 1696.073 MHz.
[    1.783073] Switching to clocksource tsc
[    1.839136] usb 1-1.7: new high-speed USB device number 4 using ehci_hcd
[    1.931766] usb 1-1.7: New USB device found, idVendor=0bda, idProduct=0129
[    1.931771] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.931773] usb 1-1.7: Product: USB2.0-CRW
[    1.931775] usb 1-1.7: Manufacturer: Generic
[    1.931777] usb 1-1.7: SerialNumber: 20100201396000000
[    2.002930] usb 1-1.8: new high-speed USB device number 5 using ehci_hcd
[    2.159746] usb 1-1.8: New USB device found, idVendor=0c45, idProduct=64ad
[    2.159751] usb 1-1.8: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.159754] usb 1-1.8: Product: Laptop_Integrated_Webcam_HD
[    2.159756] usb 1-1.8: Manufacturer: CN0Y3PX872487416AXTMA01
[    2.622682] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   13.698059] Adding 8157180k swap on /dev/sda5.  Priority:-1 extents:1 across:8157180k
[   13.703732] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.752121] udevd[407]: starting version 175
[   13.937982] type=1400 audit(1398501225.438:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=560 comm="apparmor_parser"
[   13.938511] type=1400 audit(1398501225.438:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=560 comm="apparmor_parser"
[   13.938811] type=1400 audit(1398501225.438:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=560 comm="apparmor_parser"
[   14.067094] wmi: Mapper loaded
[   14.074533] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[   14.074538] AMD IOMMUv2 functionality not available on this sytem
[   14.109264] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   14.116789] lp: driver loaded but no devices found
[   14.134350] input: Dell WMI hotkeys as /devices/virtual/input/input4
[   14.246296] Bluetooth: Core ver 2.16
[   14.246318] NET: Registered protocol family 31
[   14.246320] Bluetooth: HCI device and connection manager initialized
[   14.246322] Bluetooth: HCI socket layer initialized
[   14.246324] Bluetooth: L2CAP socket layer initialized
[   14.246329] Bluetooth: SCO socket layer initialized
[   14.308635] Linux video capture interface: v2.00
[   14.321796] [drm] Initialized drm 1.1.0 20060810
[   14.351939] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[   14.355519] scsi3 : SCSI emulation for RTS5139 USB card reader
[   14.355668] usbcore: registered new interface driver rts5139
[   14.355718] scsi 3:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[   14.356402] sd 3:0:0:0: Attached scsi generic sg2 type 0
[   14.357394] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[   14.398288] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
[   14.555639] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
[   14.557198] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
[   14.558703] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
[   14.560118] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   14.581563] usbcore: registered new interface driver btusb
[   14.615580] [drm] Memory usable by graphics device = 2048M
[   14.615588] i915 0000:00:02.0: setting latency timer to 64
[   14.627569] usbcore: registered new interface driver ath3k
[   14.654467] [drm:i915_write32] *ERROR* Unknown unclaimed register before writing to c5100
[   14.654529] i915 0000:00:02.0: irq 64 for MSI/MSI-X
[   14.654538] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   14.654540] [drm] Driver supports precise vblank timestamp query.
[   14.654580] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   14.727443] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:64ad)
[   14.758245] usb 1-1.5: USB disconnect, device number 3
[   14.763151] fbcon: inteldrmfb (fb0) is primary device
[   14.763242] Console: switching to colour frame buffer device 170x48
[   14.763264] fb0: inteldrmfb frame buffer device
[   14.763265] drm: registered panic notifier
[   14.763765] i915 0000:00:02.0: More than 8 outputs detected
[   14.763823] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   14.765114] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[   14.765122] ACPI Error: Method parse/execution failed [\_SB_.PCI0.RP05.PEGP.DD02._BCL] (Node ffff88015928fde8), AE_NOT_FOUND (20120320/psparse-536)
[   14.765517] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[   14.765582] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2e/LNXVIDEO:00/input/input5
[   14.767761] acpi device:54: registered as cooling_device4
[   14.767820] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   14.767902] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[   14.767907] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8:1.0/input/input6
[   14.767987] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   14.768150] usbcore: registered new interface driver uvcvideo
[   14.768155] USB Video Class driver (1.1.1)
[   14.854283] device-mapper: multipath: version 1.4.1 loaded
[   14.954882] usb 1-1.5: new full-speed USB device number 6 using ehci_hcd
[   15.271343] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   15.271347] Disabling lock debugging due to kernel taint
[   15.282688] [fglrx] Maximum main memory to use for locked dma buffers: 3682 MBytes.
[   15.282895] [fglrx]   vendor: 1002 device: 6660 count: 1
[   15.283213] [fglrx] ioport: bar 4, base 0x3000, size: 0x100
[   15.283224] pci 0000:03:00.0: enabling device (0006 -> 0007)
[   15.283378] [fglrx] Kernel PAT support is enabled
[   15.283396] [fglrx] module loaded - fglrx 13.10.10 [May 23 2013] with 1 minors
[   15.328290] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00
[   15.428923] snd_hda_intel 0000:00:03.0: irq 65 for MSI/MSI-X
[   15.447013] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   15.467786] hda_codec: invalid CONNECT_LIST verb 3[1]:0
[   15.467973] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[   15.468220] snd_hda_intel 0000:00:1b.0: irq 66 for MSI/MSI-X
[   15.495380] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[   15.913598] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   16.257109] [drm:intel_dp_set_link_train] *ERROR* Timed out waiting for DP idle patterns
[   16.257114] [drm:i915_write32] *ERROR* Unknown unclaimed register before writing to 64040
[   16.407648] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   16.537610] init: failsafe main process (974) killed by TERM signal
[   16.617989] type=1400 audit(1398501228.122:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1058 comm="apparmor_parser"
[   16.618536] type=1400 audit(1398501228.122:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1057 comm="apparmor_parser"
[   16.618546] type=1400 audit(1398501228.122:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1058 comm="apparmor_parser"
[   16.618865] type=1400 audit(1398501228.122:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1058 comm="apparmor_parser"
[   16.618985] type=1400 audit(1398501228.122:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1057 comm="apparmor_parser"
[   16.621299] type=1400 audit(1398501228.126:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1061 comm="apparmor_parser"
[   16.621934] type=1400 audit(1398501228.126:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1061 comm="apparmor_parser"
[   16.646200] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.646204] Bluetooth: BNEP filters: protocol multicast
[   16.665530] r8169 0000:01:00.0: eth0: link down
[   16.665542] r8169 0000:01:00.0: eth0: link down
[   16.665863] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.666122] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.717056] ppdev: user-space parallel port driver
[   16.752638] Bluetooth: RFCOMM TTY layer initialized
[   16.752645] Bluetooth: RFCOMM socket layer initialized
[   16.752648] Bluetooth: RFCOMM ver 1.11
[   17.756507] fglrx_pci 0000:03:00.0: irq 67 for MSI/MSI-X
[   17.757103] [fglrx] Firegl kernel thread PID: 1333
[   17.757185] [fglrx] Firegl kernel thread PID: 1334
[   17.757264] [fglrx] Firegl kernel thread PID: 1335
[   17.757343] [fglrx] IRQ 67 Enabled
[   17.770915] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[   17.770919] [fglrx] Reserved FB block: Unshared offset:f8c2000, size:43e000
[   17.770920] [fglrx] Reserved FB block: Unshared offset:3ffef000, size:11000
[   17.881970] vgaarb: this pci device is not a vga device
[   18.270020] r8169 0000:01:00.0: eth0: link up
[   18.270341] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   20.041763] usb 1-1.5: New USB device found, idVendor=0cf3, idProduct=0036
[   20.041768] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   20.515513] vgaarb: this pci device is not a vga device
[  168.168021] usb 1-1.5: USB disconnect, device number 6
[  177.060293] usb 1-1.5: new full-speed USB device number 7 using ehci_hcd
[  177.153584] usb 1-1.5: New USB device found, idVendor=0cf3, idProduct=0036
[  177.153594] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  177.164408] usb 1-1.5: USB disconnect, device number 7
[  177.368186] usb 1-1.5: new full-speed USB device number 8 using ehci_hcd
[  182.457486] usb 1-1.5: New USB device found, idVendor=0cf3, idProduct=0036
[  182.457491] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  335.401423] audit_printk_skb: 45 callbacks suppressed
[  335.401431] type=1400 audit(1398501547.144:27): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1102 comm="cupsd" pid=1102 comm="cupsd" capability=36  capname="block_suspend"
manuela@manuela-Inspiron-3537:~$




jurastublic je napisao/la:
Mana je napisao/la: imam problema kod instalacije Firmware for Linux kernel drivers-i očito je tu nastao problem. nekaj nije kompatibilno i ne želi mi se instalirati.

Ovo je zanimljiva informacija. Izgleda da prilikom instalacije novog kernela nije do kraja instaliran i vlasnički firmware za razne kartice.
Najjednostavniji test bi bio da u grub meniju pri startanju računala izabereš najstariji kernel koji imaš i vidiš radi li s tim kernelom.

A rješenje problema bi onda bilo da instaliraš paket "linux-firmware"
Kod: Označi sve
sudo apt-get update && sudo apt-get install linux-firmware


Ako iz nekog razloga neće, možeš firmware i ručno prekopirati sa ubuntu stranice u /lib/firmware ali probaj prvo ovo.
I da, na kraju restartaj. (može i bez toga ali da ne kompliciramo)

Ako to ne radi, upiši u terminal par naredbi (najbolje odmah nakon restarta):
Kod: Označi sve
lspci; lsmod; dmesg
//edit: lsmod bez -v :(
pa prekopiraj sve informacije koje terminal izbaci ovamo u forum između code tagova, da vidimo šta se zbiva u tom računalu.
Postovi: 49
Postovi: 49
Pridružen/a: 25 tra 2014, 13:16
Podijelio/la zahvalu: 6 puta
Primio/la zahvalu: 3 puta
Spol: Ž
OS: Ubuntu 12.04 LTS

Na mreži
Trenutno korisnika/ca: / i 1 gost.