Sada je: 30 svi 2020, 10:21.
Diskusije usko vezane uz Arch Linux i srodne distribucije.

Moderator/ica: Moderatori/ce

evo, Xorg.0.log

Kod: Označi sve
[   184.768]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[   184.768] X Protocol Version 11, Revision 0
[   184.768] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[   184.768] Current Operating System: Linux draconian 3.12.7-2-ARCH #1 SMP PREEMPT Sun Jan 12 13:09:09 CET 2014 x86_64
[   184.768] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
[   184.768] Build Date: 09 January 2014  08:47:24AM
[   184.768] 
[   184.768] Current version of pixman: 0.32.4
[   184.768]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[   184.768] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   184.768] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 19 12:19:29 2014
[   184.769] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   184.769] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   184.770] (==) No Layout section.  Using the first Screen section.
[   184.770] (==) No screen section available. Using defaults.
[   184.770] (**) |-->Screen "Default Screen Section" (0)
[   184.770] (**) |   |-->Monitor "<default monitor>"
[   184.771] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[   184.771] (==) Automatically adding devices
[   184.771] (==) Automatically enabling devices
[   184.771] (==) Automatically adding GPU devices
[   184.775] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   184.775]    Entry deleted from font path.
[   184.775] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   184.775]    Entry deleted from font path.
[   184.775]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   184.775] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   184.775]    Entry deleted from font path.
[   184.775]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   184.775] (==) FontPath set to:
   /usr/share/fonts/misc/,
   /usr/share/fonts/TTF/,
   /usr/share/fonts/OTF/
[   184.775] (==) ModulePath set to "/usr/lib/xorg/modules"
[   184.775] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[   184.775] (II) Loader magic: 0x804c80
[   184.775] (II) Module ABI versions:
[   184.775]    X.Org ANSI C Emulation: 0.4
[   184.775]    X.Org Video Driver: 15.0
[   184.775]    X.Org XInput driver : 20.0
[   184.775]    X.Org Server Extension : 8.0
[   184.775] (II) xfree86: Adding drm device (/dev/dri/card0)
[   184.776] (--) PCI:*(0:0:2:0) 8086:2e32:1043:836d rev 3, Mem @ 0xfe400000/4194304, 0xe0000000/268435456, I/O @ 0x0000dc00/8
[   184.776] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   184.777] Initializing built-in extension Generic Event Extension
[   184.777] Initializing built-in extension SHAPE
[   184.777] Initializing built-in extension MIT-SHM
[   184.777] Initializing built-in extension XInputExtension
[   184.777] Initializing built-in extension XTEST
[   184.777] Initializing built-in extension BIG-REQUESTS
[   184.777] Initializing built-in extension SYNC
[   184.777] Initializing built-in extension XKEYBOARD
[   184.777] Initializing built-in extension XC-MISC
[   184.777] Initializing built-in extension SECURITY
[   184.777] Initializing built-in extension XINERAMA
[   184.777] Initializing built-in extension XFIXES
[   184.777] Initializing built-in extension RENDER
[   184.777] Initializing built-in extension RANDR
[   184.777] Initializing built-in extension COMPOSITE
[   184.777] Initializing built-in extension DAMAGE
[   184.777] Initializing built-in extension MIT-SCREEN-SAVER
[   184.777] Initializing built-in extension DOUBLE-BUFFER
[   184.777] Initializing built-in extension RECORD
[   184.777] Initializing built-in extension DPMS
[   184.777] Initializing built-in extension Present
[   184.777] Initializing built-in extension DRI3
[   184.777] Initializing built-in extension X-Resource
[   184.777] Initializing built-in extension XVideo
[   184.777] Initializing built-in extension XVideo-MotionCompensation
[   184.777] Initializing built-in extension XFree86-VidModeExtension
[   184.777] Initializing built-in extension XFree86-DGA
[   184.777] Initializing built-in extension XFree86-DRI
[   184.777] Initializing built-in extension DRI2
[   184.777] (II) "glx" will be loaded by default.
[   184.777] (II) LoadModule: "dri2"
[   184.777] (II) Module "dri2" already built-in
[   184.777] (II) LoadModule: "glamoregl"
[   184.777] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   184.795] (II) Module glamoregl: vendor="X.Org Foundation"
[   184.795]    compiled for 1.15.0, module version = 0.5.1
[   184.795]    ABI class: X.Org ANSI C Emulation, version 0.4
[   184.795] (II) LoadModule: "glx"
[   184.796] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   184.798] (II) Module glx: vendor="X.Org Foundation"
[   184.798]    compiled for 1.15.0, module version = 1.0.0
[   184.798]    ABI class: X.Org Server Extension, version 8.0
[   184.798] (==) AIGLX enabled
[   184.798] Loading extension GLX
[   184.798] (==) Matched intel as autoconfigured driver 0
[   184.798] (==) Matched intel as autoconfigured driver 1
[   184.798] (==) Matched modesetting as autoconfigured driver 2
[   184.798] (==) Matched fbdev as autoconfigured driver 3
[   184.798] (==) Matched vesa as autoconfigured driver 4
[   184.798] (==) Assigned the driver to the xf86ConfigLayout
[   184.798] (II) LoadModule: "intel"
[   184.798] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   184.803] (II) Module intel: vendor="X.Org Foundation"
[   184.803]    compiled for 1.15.0, module version = 2.99.907
[   184.803]    Module class: X.Org Video Driver
[   184.803]    ABI class: X.Org Video Driver, version 15.0
[   184.803] (II) LoadModule: "modesetting"
[   184.803] (WW) Warning, couldn't open module modesetting
[   184.803] (II) UnloadModule: "modesetting"
[   184.804] (II) Unloading modesetting
[   184.804] (EE) Failed to load module "modesetting" (module does not exist, 0)
[   184.804] (II) LoadModule: "fbdev"
[   184.804] (WW) Warning, couldn't open module fbdev
[   184.804] (II) UnloadModule: "fbdev"
[   184.804] (II) Unloading fbdev
[   184.804] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   184.804] (II) LoadModule: "vesa"
[   184.804] (WW) Warning, couldn't open module vesa
[   184.804] (II) UnloadModule: "vesa"
[   184.804] (II) Unloading vesa
[   184.804] (EE) Failed to load module "vesa" (module does not exist, 0)
[   184.804] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
   i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
   915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
   Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
   GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[   184.805] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[   184.805] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[   184.805] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[   184.805] (++) using VT number 1

[   184.808] (--) intel(0): Integrated Graphics Chipset: Intel(R) G41
[   184.808] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3
[   184.808] (II) intel(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[   184.808] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   184.808] (==) intel(0): RGB weight 888
[   184.808] (==) intel(0): Default visual is TrueColor
[   184.808] (**) intel(0): Framebuffer tiled
[   184.808] (**) intel(0): Pixmaps tiled
[   184.808] (**) intel(0): "Tear free" disabled
[   184.808] (**) intel(0): Forcing per-crtc-pixmaps? no
[   184.808] (II) intel(0): Output VGA1 has no monitor section
[   184.808] (II) intel(0): Output VIRTUAL1 has no monitor section
[   184.808] (--) intel(0): Output VGA1 using initial mode 1920x1200 on pipe 0
[   184.808] (==) intel(0): DPI set to (96, 96)
[   184.808] (II) Loading sub module "dri2"
[   184.808] (II) LoadModule: "dri2"
[   184.808] (II) Module "dri2" already built-in
[   184.808] (==) Depth 24 pixmap format is 32 bpp
[   184.814] (II) intel(0): SNA initialized with Eaglelake (gen4.5) backend
[   184.814] (==) intel(0): Backing store enabled
[   184.814] (==) intel(0): Silken mouse enabled
[   184.814] (II) intel(0): HW Cursor enabled
[   184.814] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   184.815] (==) intel(0): DPMS enabled
[   184.815] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   184.815] (II) intel(0): [DRI2] Setup complete
[   184.815] (II) intel(0): [DRI2]   DRI driver: i965
[   184.815] (II) intel(0): direct rendering: DRI2 Enabled
[   184.815] (==) intel(0): hotplug detection: "enabled"
[   184.815] (--) RandR disabled
[   184.845] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   184.845] (II) AIGLX: enabled GLX_ARB_create_context
[   184.845] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   184.845] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   184.845] (II) AIGLX: enabled GLX_INTEL_swap_event
[   184.845] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   184.845] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[   184.845] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[   184.845] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   184.845] (II) AIGLX: Loaded and initialized i965
[   184.845] (II) GLX: Initialized DRI2 GL provider for screen 0
[   184.855] (II) intel(0): switch to mode 1920x1200@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none
[   184.870] (II) intel(0): Setting screen physical size to 508 x 317
[   184.924] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   184.924] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   184.924] (II) LoadModule: "evdev"
[   184.924] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   184.925] (II) Module evdev: vendor="X.Org Foundation"
[   184.925]    compiled for 1.15.0, module version = 2.8.2
[   184.925]    Module class: X.Org XInput Driver
[   184.925]    ABI class: X.Org XInput driver, version 20.0
[   184.925] (II) Using input driver 'evdev' for 'Power Button'
[   184.925] (**) Power Button: always reports core events
[   184.925] (**) evdev: Power Button: Device: "/dev/input/event1"
[   184.926] (--) evdev: Power Button: Vendor 0 Product 0x1
[   184.926] (--) evdev: Power Button: Found keys
[   184.926] (II) evdev: Power Button: Configuring as keyboard
[   184.926] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[   184.926] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   184.926] (**) Option "xkb_rules" "evdev"
[   184.926] (**) Option "xkb_model" "pc104"
[   184.926] (**) Option "xkb_layout" "hr"
[   184.945] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   184.945] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   184.945] (II) Using input driver 'evdev' for 'Power Button'
[   184.945] (**) Power Button: always reports core events
[   184.945] (**) evdev: Power Button: Device: "/dev/input/event0"
[   184.945] (--) evdev: Power Button: Vendor 0 Product 0x1
[   184.945] (--) evdev: Power Button: Found keys
[   184.945] (II) evdev: Power Button: Configuring as keyboard
[   184.945] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event0"
[   184.945] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[   184.945] (**) Option "xkb_rules" "evdev"
[   184.945] (**) Option "xkb_model" "pc104"
[   184.945] (**) Option "xkb_layout" "hr"
[   184.946] (II) config/udev: Adding drm device (/dev/dri/card0)
[   184.946] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event6)
[   184.946] (II) No input driver specified, ignoring this device.
[   184.946] (II) This device may have been added with another device file.
[   184.946] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event5)
[   184.946] (II) No input driver specified, ignoring this device.
[   184.946] (II) This device may have been added with another device file.
[   184.946] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event4)
[   184.946] (II) No input driver specified, ignoring this device.
[   184.946] (II) This device may have been added with another device file.
[   184.946] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event3)
[   184.946] (II) No input driver specified, ignoring this device.
[   184.946] (II) This device may have been added with another device file.
[   184.946] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event2)
[   184.947] (II) No input driver specified, ignoring this device.
[   184.947] (II) This device may have been added with another device file.
[   184.947] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event8)
[   184.947] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[   184.947] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   184.947] (**) Logitech USB Receiver: always reports core events
[   184.947] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event8"
[   184.947] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[   184.947] (--) evdev: Logitech USB Receiver: Found keys
[   184.947] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[   184.947] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input11/event8"
[   184.947] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 8)
[   184.947] (**) Option "xkb_rules" "evdev"
[   184.947] (**) Option "xkb_model" "pc104"
[   184.947] (**) Option "xkb_layout" "hr"
[   184.947] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event9)
[   184.947] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[   184.947] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[   184.947] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   184.947] (**) Logitech USB Receiver: always reports core events
[   184.947] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event9"
[   184.947] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[   184.947] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[   184.947] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[   184.947] (--) evdev: Logitech USB Receiver: Found relative axes
[   184.947] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[   184.947] (--) evdev: Logitech USB Receiver: Found absolute axes
[   184.947] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[   184.947] (--) evdev: Logitech USB Receiver: Found keys
[   184.947] (II) evdev: Logitech USB Receiver: Configuring as mouse
[   184.947] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[   184.947] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[   184.947] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[   184.947] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   184.947] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input12/event9"
[   184.947] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[   184.947] (**) Option "xkb_rules" "evdev"
[   184.947] (**) Option "xkb_model" "pc104"
[   184.947] (**) Option "xkb_layout" "hr"
[   184.948] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[   184.948] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[   184.948] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[   184.948] (**) Logitech USB Receiver: (accel) acceleration profile 0
[   184.948] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   184.948] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   184.948] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[   184.948] (II) No input driver specified, ignoring this device.
[   184.948] (II) This device may have been added with another device file.
[   184.948] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[   184.948] (II) No input driver specified, ignoring this device.
[   184.948] (II) This device may have been added with another device file.
[   192.486] (II) intel(0): EDID vendor "DEL", prod id 41081
[   192.486] (II) intel(0): Using EDID range info for horizontal sync
[   192.486] (II) intel(0): Using EDID range info for vertical refresh
[   192.486] (II) intel(0): Printing DDC gathered Modelines:
[   192.486] (II) intel(0): Modeline "1920x1200"x0.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[   192.486] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   192.486] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   192.486] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   192.486] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   192.486] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   192.486] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   192.486] (II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[   192.486] (II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[   192.486] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
Postovi: 86
Postovi: 86
Pridružen/a: 19 tra 2012, 18:06
Lokacija: Zagreb
Podijelio/la zahvalu: 5 puta
Primio/la zahvalu: 0 puta
Spol: M
OS: OpenSuse 13.1
sretno i bez odustajanja ;)
Avatar
Postovi: 8831
Postovi: 8831
Pridružen/a: 28 lip 2009, 22:49
Podijelio/la zahvalu: 197 puta
Primio/la zahvalu: 237 puta
Spol: M
OS: Slackware
hvala, međutim vi ovdje ste mi jedina nada jer ja jednostavno nemam dovoljno znanja da ovo riješim sam...
Postovi: 86
Postovi: 86
Pridružen/a: 19 tra 2012, 18:06
Lokacija: Zagreb
Podijelio/la zahvalu: 5 puta
Primio/la zahvalu: 0 puta
Spol: M
OS: OpenSuse 13.1
Ne koristim Cinnamon, ali pretpostavljam da treba negdje uključiti compositing. Inače, G41 je odavno u potpunosti podržana u Linuxu i driver bi trebao raditi bez problema. Nažalost, to je sve što mogu reći na tu temu jer iako imam G41 Intelovu integrušu u kompu s kojeg ovo pišem, ne koristim tu grafiku. Naravno, bio sam ju isprobao i radila je ok.
Nadam se da ti je ovo ipak donekle korisna informacija.

EDIT: jesi pratio ovo:
https://wiki.archlinux.org/index.php/Intel
1986-1990: Commodore64 / 1990-1994: Amiga 500 / 1995-1996: Amiga 1200 / 1997-2001: N/A@home /
2002-2004: Windows98, XP /
2004-2005: Knoppix, Mandrake / 2005: Mandriva, Ubuntu / 2005-2009: LFS / 2009-2010: Mint /
2010-... Arch
Avatar
Moderator
Postovi: 3293
Moderator
Postovi: 3293
Pridružen/a: 01 pro 2010, 23:50
Lokacija: Nova Gradiška
Podijelio/la zahvalu: 122 puta
Primio/la zahvalu: 156 puta
OS: Arch/KDE, Debian/Armbian
jesam to sam odmah tako napravio.
No ovo da mi treba compositing manager, je vrlo realno da je problem, sad je samo pitanje koji koristi Cinnamon, gledam to po internetu i baš nemrem naći. Valjda su nasljedili onaj koji koristi Gnome 3
Postovi: 86
Postovi: 86
Pridružen/a: 19 tra 2012, 18:06
Lokacija: Zagreb
Podijelio/la zahvalu: 5 puta
Primio/la zahvalu: 0 puta
Spol: M
OS: OpenSuse 13.1
digao sam ruke od Arca i Cinnamon-a, i morao sam instalirati Mint jer više nemam vremena za eksperimente i vrlo mi je žao zbog toga što sam odustao. Problem je što sam sva druga sučelja isprobao i jedino mi je prihvatljiv Gnome Shell i Cinnamon, a ipak dajem prednost Cinnamonu - tako da sad moram koristiti Mint.
BTW, probao sam skinuti i LMDE 15, i nakon update-a od 750Mb taj se na 2 različita stroja više nije digao, tako da mi je i to "pokvarilo dan"
Postovi: 86
Postovi: 86
Pridružen/a: 19 tra 2012, 18:06
Lokacija: Zagreb
Podijelio/la zahvalu: 5 puta
Primio/la zahvalu: 0 puta
Spol: M
OS: OpenSuse 13.1
codegun je napisao/la:digao sam ruke od Arca i Cinnamon-a, i morao sam instalirati Mint jer više nemam vremena za eksperimente i vrlo mi je žao zbog toga što sam odustao. Problem je što sam sva druga sučelja isprobao i jedino mi je prihvatljiv Gnome Shell i Cinnamon, a ipak dajem prednost Cinnamonu - tako da sad moram koristiti Mint.
BTW, probao sam skinuti i LMDE 15, i nakon update-a od 750Mb taj se na 2 različita stroja više nije digao, tako da mi je i to "pokvarilo dan"



na njihovom forumu imaš upute što napravit prije updatea....ja na dva kompa napravio tako i radi sve ok....
a i ja sam odustao od archa za sad (trenutno na laptop dižem arch xfce) jer me ubilo instaliranje cups-a
tko da sam sad na debianu....e sad ćemo vidit šta će bit na laptopu jer tamo mi je opet wlan problem....
broadcom a laptop star 9 godina.... :-D
Avatar
Postovi: 683
Postovi: 683
Pridružen/a: 15 stu 2011, 20:41
Lokacija: Bjelovar i okolica
Podijelio/la zahvalu: 43 puta
Primio/la zahvalu: 6 puta
Spol: M
OS: Debian
evo pišem sa laptopa ....nakon malo muke sa bežičnom sve radi ko sat.....
Avatar
Postovi: 683
Postovi: 683
Pridružen/a: 15 stu 2011, 20:41
Lokacija: Bjelovar i okolica
Podijelio/la zahvalu: 43 puta
Primio/la zahvalu: 6 puta
Spol: M
OS: Debian
codegun je napisao/la:digao sam ruke od Arca i Cinnamon-a, i morao sam instalirati Mint jer više nemam vremena za eksperimente i vrlo mi je žao zbog toga što sam odustao. Problem je što sam sva druga sučelja isprobao i jedino mi je prihvatljiv Gnome Shell i Cinnamon, a ipak dajem prednost Cinnamonu - tako da sad moram koristiti Mint.
BTW, probao sam skinuti i LMDE 15, i nakon update-a od 750Mb taj se na 2 različita stroja više nije digao, tako da mi je i to "pokvarilo dan"


Nemam ni ja egzotični hardware, intel - grafička, dva puta provao instalirati arch sa cinnamon sa mdm (iz AUR-a) i nikakvih problema nisam imao.
Nakon što sam instalirao base system ručno ili pomoću Skripte, instalirao sam Cinnamon:
Kod: Označi sve
sudo pacman -S cinnamon

Dali si tu imao kakvih problema - da li se sve instaliralo?
Nakon što se instaliralo kucam:
Kod: Označi sve
nano ~/.xinitrc

ako ima komandi,idem na kraj i stavljam novi red i pisem:
exec cinnamon-session
Zatvaram: CTRL+X, sačuvam: y, pritisnem Enter da potvrdim, i sada kucam:
startx
Cinnamon se bez problema podiže, tako sam ja radio - pa kasnije instalirao mdm ili ko šta voli.
Avatar
Postovi: 1801
Postovi: 1801
Pridružen/a: 15 sij 2014, 09:37
Lokacija: Zaljev svetaca
Podijelio/la zahvalu: 69 puta
Primio/la zahvalu: 177 puta
Spol:
OS: Leap 15.1 / Hera 5.1
ovak, nisam siguran koji je točno repozitorij AUR? Arch i cinnamon sam instalirao iz defaultnog rep. baš tako kako ti pišeš. Prije cinnamon-a sam instalirao LightDM i probao da li to radi. LightDM nisam stavio da se diže automatski jer sam želio iz konzole experimentirati prije nego to sve proradi.
Nakon reboot-a, logiram se ko root, (imam drugoj nonroot korisnika), potjeram LightDM (to se uredno pojavi). Tamo se može birat Cinnamon, Cinnamon - software rendering, naravno odaberem ovaj "pravi" sa nonroot korisnikom.

I čekam dobrih POLA MINUTE sa crnim ekranom (imam SSD !?) i onda se pojavi Cinnamon i kaže da je u soft. renderingu. I to je to.

BDW, probao sam i MDM (Mate Display Man.) i isto. Probao sam i cijeli gnome instalirat, i ni to se nije diglo na pravi način nego u fallback modu. Prije svega sam instalirao driver za intel graf. Makar je sve bilo isto i kad sam probao s generičkim mesa driverima, i svačim... x-i rade, LigthDM radi, samo ovaj neče...
Postovi: 86
Postovi: 86
Pridružen/a: 19 tra 2012, 18:06
Lokacija: Zagreb
Podijelio/la zahvalu: 5 puta
Primio/la zahvalu: 0 puta
Spol: M
OS: OpenSuse 13.1

Na mreži
Trenutno korisnika/ca: / i 1 gost.