Sada je: 15 ruj 2019, 17:28.
Diskusije o hardveru i driverima pod Linuxom.

Moderator/ica: Moderatori/ce

Nadam se da nije pred smrt :place Danas upalim računalo i disk mi nije montiran, niti se htio montirati. Evo koju sam poruku dobio:
slika
slika
Nekako sam ga montirao i vidim da je sve tu , pokušao sam pokrenuti provjeru diska i evo porukice :ljut2
slika
Sada što je uzrok problema :hmm nadogradili su se Nvidia driveri jučer, a i ja sam čačkao sa Grub Customizerom postavio sam novu sliku u Grub :nee

Pokušao sam još jednom provjeriti disk sa smart provjerom, ovog puta kratka provjera...
slika
Ali pred kraj provjere opet izbaci poruku "provjera nije uspjela".
Zadnja izmjena: Jeremija; 30 pro 2018, 11:25; ukupno mijenjano 1 put/a.
S rogatim se bodeš samo kada je dobro pečen
Avatar
Postovi: 452
Postovi: 452
Pridružen/a: 20 pro 2015, 15:51
Podijelio/la zahvalu: 108 puta
Primio/la zahvalu: 20 puta
Spol: M
OS: Ubuntu 18.04 i 16.04
Kupuj novi i prebacuj ako imaš kaj vrijednoga gore.
Avatar
Postovi: 124
Postovi: 124
Pridružen/a: 15 stu 2011, 09:00
Podijelio/la zahvalu: 2 puta
Primio/la zahvalu: 3 puta
Jeremija, prije nego baciš disk, upali terminal, otipkaj "dmesg" i pogledaj ima li kakvih grešaka u logu. Ovi bad sektori mogu biti i samo od loše namještenog SATA kabla, neispravnog SATA konektora na ploči ili neispravnog USB porta kod prijenosnih diskova. To mislim zato što ne dovršava prijenos. Probaj bolje namjestiti kabel i/ili ga ukopčati u drugi SATA port.

To je kako vidim windows NTFS datotečni sustav, možda je samo do njega, probaj iz windowsa ili HirensBootCD-a i sl. pokrenuti chkdisk /R. Ili iz linuxa za prvu ruku sudo ntfsfix /dev/sdb1 . Ako nemaš ntfsfix, instaliraj ga s sudo apt install ntfs-3g .
BTW, za promjenu grub slike ti ne treba neki customizer. Samo stavi neku .png sliku u /boot/grub i pokreni sudo update-grub.

Živ bio!
Avatar
Postovi: 1893
Postovi: 1893
Pridružen/a: 16 tra 2011, 08:34
Lokacija: i grupa Film
Podijelio/la zahvalu: 45 puta
Primio/la zahvalu: 338 puta
Spol: M
OS: Mint 10 LXDE itd...
Ako ti je to WesternDigital Blue, sutra odmah u dućan po novi HDD i prebaci podatke na njega (i nemoj ponovno kupiti WD Blue), a ovog nosi tamo gdje si ga kupio (ako je pod garancijom, WD Blue ima dvije godine garancije) i za par dana ćeš dobiti novi disk.
[+ Prikaži] Klik
ThinkPad T440p
Intel Core i5-4300M
Intel HD Graphics 4600
16GB DDR3L
1xSanDisk X400 512 GB & 1x240GB Intel 2500 Pro
15.6" FHD IPS anti-glare
6 & 9 cell Li-Ion battery
OS: kako kada
Slika: dio kolekcije

***

ZEN
"Charlie. What are you thinking?"
"I'm thinking about what I want and what I need."
"What do you want?"
"I want a peaceful soul."
"And what do you need?"
"I need a bigger gun."
Avatar
Site Admin
Postovi: 10238
Site Admin
Postovi: 10238
Pridružen/a: 01 kol 2012, 12:39
Podijelio/la zahvalu: 573 puta
Primio/la zahvalu: 746 puta
Spol: M
OS: LinuxMint Cinnamon
jurastublic je napisao/la:Jeremija, prije nego baciš disk, upali terminal, otipkaj "dmesg" i pogledaj ima li kakvih grešaka u logu. Ovi bad sektori mogu biti i samo od loše namještenog SATA kabla, neispravnog SATA konektora na ploči ili neispravnog USB porta kod prijenosnih diskova. To mislim zato što ne dovršava prijenos. Probaj bolje namjestiti kabel i/ili ga ukopčati u drugi SATA port.

To je kako vidim windows NTFS datotečni sustav, možda je samo do njega, probaj iz windowsa ili HirensBootCD-a i sl. pokrenuti chkdisk /R. Ili iz linuxa za prvu ruku sudo ntfsfix /dev/sdb1 . Ako nemaš ntfsfix, instaliraj ga s sudo apt install ntfs-3g .
BTW, za promjenu grub slike ti ne treba neki customizer. Samo stavi neku .png sliku u /boot/grub i pokreni sudo update-grub.

Živ bio!


Kod: Označi sve
[    0.000000] Linux version 4.15.0-39-generic (buildd@lgw01-amd64-054) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #42-Ubuntu SMP Tue Oct 23 15:48:01 UTC 2018 (Ubuntu 4.15.0-39.42-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-39-generic root=UUID=f409df9f-54ed-49ff-9a90-26ef341efd6c ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e5000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff6ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cff70000-0x00000000cff7dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cff7e000-0x00000000cffcffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cffd0000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: System manufacturer System Product Name/P5G41T-M LX2/GB, BIOS 0504    01/10/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 3E00000000 write-back
[    0.000000]   1 base 0200000000 mask 3FE0000000 write-back
[    0.000000]   2 base 0220000000 mask 3FF0000000 write-back
[    0.000000]   3 base 00D0000000 mask 3FF0000000 uncachable
[    0.000000]   4 base 00E0000000 mask 3FE0000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000000] total RAM covered: 8192M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K    chunk_size: 64K    num_reg: 6     lose cover RAM: 0G
[    0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcff70 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 99000 size 24576
[    0.000000] BRK [0x192b3f000, 0x192b3ffff] PGTABLE
[    0.000000] BRK [0x192b40000, 0x192b40fff] PGTABLE
[    0.000000] BRK [0x192b41000, 0x192b41fff] PGTABLE
[    0.000000] BRK [0x192b42000, 0x192b42fff] PGTABLE
[    0.000000] BRK [0x192b43000, 0x192b43fff] PGTABLE
[    0.000000] BRK [0x192b44000, 0x192b44fff] PGTABLE
[    0.000000] BRK [0x192b45000, 0x192b45fff] PGTABLE
[    0.000000] BRK [0x192b46000, 0x192b46fff] PGTABLE
[    0.000000] BRK [0x192b47000, 0x192b47fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x30207000-0x340fafff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FBAE0 000024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 0x00000000CFF70100 00005C (v01 A_M_I_ OEMXSDT  01001410 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000CFF70290 0000F4 (v03 A_M_I_ OEMFACP  01001410 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000CFF70440 0071D5 (v01 A1517  A1517000 00000000 INTL 20060113)
[    0.000000] ACPI: FACS 0x00000000CFF7E000 000040
[    0.000000] ACPI: FACS 0x00000000CFF7E000 000040
[    0.000000] ACPI: APIC 0x00000000CFF70390 00006C (v01 A_M_I_ OEMAPIC  01001410 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000CFF70400 00003C (v01 A_M_I_ OEMMCFG  01001410 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000CFF7E040 00008A (v01 A_M_I_ AMI_OEM  01001410 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000CFF77620 000038 (v01 A_M_I_ OEMHPET  01001410 MSFT 00000097)
[    0.000000] ACPI: GSCI 0x00000000CFF7E0D0 002024 (v01 A_M_I_ GMCHSCI  01001410 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000CFF807E0 000363 (v01 DpgPmm CpuPm    00000012 INTL 20060113)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x22ffd1000-0x22fffbfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000022fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cff6ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000022fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff]
[    0.000000] On node 0 totalpages: 2096910
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13246 pages used for memmap
[    0.000000]   DMA32 zone: 847728 pages, LIFO batch:31
[    0.000000]   Normal zone: 19456 pages used for memmap
[    0.000000]   Normal zone: 1245184 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 98 pages
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e4fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e5000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff70000-0xcff7dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff7e000-0xcffcffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcffd0000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2064123
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-39-generic root=UUID=f409df9f-54ed-49ff-9a90-26ef341efd6c ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8097136K/8387640K available (12300K kernel code, 2472K rwdata, 4248K rodata, 2408K init, 2416K bss, 290504K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39178 entries in 154 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000]    Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 2838.154 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5676.30 BogoMIPS (lpj=11352616)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.029796] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.031531] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.031600] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.031655] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.031926] mce: CPU supports 6 MCE banks
[    0.031932] CPU0: Thermal monitoring enabled (TM2)
[    0.031934] process: using mwait in idle threads
[    0.031939] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.031940] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.031942] Spectre V2 : Mitigation: Full generic retpoline
[    0.031942] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.031943] Speculative Store Bypass: Vulnerable
[    0.032078] Freeing SMP alternatives memory: 36K
[    0.040000] smpboot: CPU0: Intel(R) Xeon(R) CPU           E5440  @ 2.83GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.040000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.040000] ... version:                2
[    0.040000] ... bit width:              40
[    0.040000] ... generic registers:      2
[    0.040000] ... value mask:             000000ffffffffff
[    0.040000] ... max period:             000000007fffffff
[    0.040000] ... fixed-purpose events:   3
[    0.040000] ... event mask:             0000000700000003
[    0.040000] Hierarchical SRCU implementation.
[    0.040000] smp: Bringing up secondary CPUs ...
[    0.040000] x86: Booting SMP configuration:
[    0.040000] .... node  #0, CPUs:      #1
[    0.040113] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.040151]  #2 #3
[    0.046700] smp: Brought up 1 node, 4 CPUs
[    0.046700] smpboot: Max logical packages: 1
[    0.046700] smpboot: Total of 4 processors activated (22705.23 BogoMIPS)
[    0.048452] devtmpfs: initialized
[    0.048452] x86/mm: Memory block size: 128MB
[    0.049013] evm: security.selinux
[    0.049014] evm: security.SMACK64
[    0.049015] evm: security.SMACK64EXEC
[    0.049015] evm: security.SMACK64TRANSMUTE
[    0.049016] evm: security.SMACK64MMAP
[    0.049017] evm: security.apparmor
[    0.049017] evm: security.ima
[    0.049018] evm: security.capability
[    0.049035] PM: Registering ACPI NVS region [mem 0xcff7e000-0xcffcffff] (335872 bytes)
[    0.049035] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.049035] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.049035] pinctrl core: initialized pinctrl subsystem
[    0.049035] RTC time: 16:51:48, date: 11/27/18
[    0.049035] NET: Registered protocol family 16
[    0.049035] audit: initializing netlink subsys (disabled)
[    0.049035] audit: type=2000 audit(1543337508.048:1): state=initialized audit_enabled=0 res=1
[    0.049035] cpuidle: using governor ladder
[    0.049035] cpuidle: using governor menu
[    0.049035] ACPI: bus type PCI registered
[    0.049035] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.049035] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.049035] PCI: not using MMCONFIG
[    0.049035] PCI: Using configuration type 1 for base access
[    0.052520] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.052520] ACPI: Added _OSI(Module Device)
[    0.052520] ACPI: Added _OSI(Processor Device)
[    0.052520] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.052520] ACPI: Added _OSI(Processor Aggregator Device)
[    0.052520] ACPI: Added _OSI(Linux-Dell-Video)
[    0.052520] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.052520] ACPI: Executed 1 blocks of module-level executable AML code
[    0.058170] ACPI: Dynamic OEM Table Load:
[    0.058177] ACPI: SSDT 0xFFFF9648E629B800 0006E0 (v01 DpgPmm P001Ist  00000011 INTL 20060113)
[    0.058916] ACPI: Interpreter enabled
[    0.058938] ACPI: (supports S0 S1 S3 S4 S5)
[    0.058939] ACPI: Using IOAPIC for interrupt routing
[    0.058973] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.060643] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[    0.060656] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.060903] ACPI: Enabled 12 GPEs in block 00 to 1F
[    0.069571] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.069577] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.069582] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.069593] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.069917] PCI host bridge to bus 0000:00
[    0.069919] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.069921] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.069922] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.069924] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.069925] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff window]
[    0.069927] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xffffffff window]
[    0.069929] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.069937] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
[    0.069958] DMAR: Forcing write-buffer flush capability
[    0.069959] DMAR: Disabling IOMMU for graphics on this chipset
[    0.070048] pci 0000:00:01.0: [8086:2e31] type 01 class 0x060400
[    0.070083] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.070195] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.070213] pci 0000:00:1b.0: reg 0x10: [mem 0xfcffc000-0xfcffffff 64bit]
[    0.070284] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.070376] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.070436] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.070534] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.070599] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.070696] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.070732] pci 0000:00:1d.0: reg 0x20: [io  0xc480-0xc49f]
[    0.070837] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.070873] pci 0000:00:1d.1: reg 0x20: [io  0xc800-0xc81f]
[    0.070976] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.071012] pci 0000:00:1d.2: reg 0x20: [io  0xc880-0xc89f]
[    0.071119] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.071155] pci 0000:00:1d.3: reg 0x20: [io  0xcc00-0xcc1f]
[    0.071264] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.071282] pci 0000:00:1d.7: reg 0x10: [mem 0xfcffbc00-0xfcffbfff]
[    0.071349] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.071441] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.071566] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.071640] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[    0.071644] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.071647] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    0.071650] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0a20 (mask 000f)
[    0.071652] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
[    0.071755] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.071769] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.071777] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.071784] pci 0000:00:1f.1: reg 0x18: [io  0x08f0-0x08f7]
[    0.071791] pci 0000:00:1f.1: reg 0x1c: [io  0x08f8-0x08fb]
[    0.071799] pci 0000:00:1f.1: reg 0x20: [io  0xffa0-0xffaf]
[    0.071815] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.071816] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.071817] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.071819] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.071907] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[    0.071920] pci 0000:00:1f.2: reg 0x10: [io  0xc400-0xc407]
[    0.071926] pci 0000:00:1f.2: reg 0x14: [io  0xc080-0xc083]
[    0.071933] pci 0000:00:1f.2: reg 0x18: [io  0xc000-0xc007]
[    0.071939] pci 0000:00:1f.2: reg 0x1c: [io  0xbc00-0xbc03]
[    0.071945] pci 0000:00:1f.2: reg 0x20: [io  0xb880-0xb88f]
[    0.071976] pci 0000:00:1f.2: PME# supported from D3hot
[    0.072101] pci 0000:01:00.0: [10de:0fc6] type 00 class 0x030000
[    0.072118] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[    0.072128] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.072137] pci 0000:01:00.0: reg 0x1c: [mem 0xde000000-0xdfffffff 64bit pref]
[    0.072144] pci 0000:01:00.0: reg 0x24: [io  0xdc00-0xdc7f]
[    0.072151] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea7ffff pref]
[    0.072245] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
[    0.072259] pci 0000:01:00.1: reg 0x10: [mem 0xfeafc000-0xfeafffff]
[    0.072388] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.072390] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.072392] pci 0000:00:01.0:   bridge window [mem 0xfd000000-0xfeafffff]
[    0.072395] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xefffffff 64bit pref]
[    0.072433] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.072489] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.072514] pci 0000:02:00.0: reg 0x10: [io  0xe800-0xe8ff]
[    0.072539] pci 0000:02:00.0: reg 0x18: [mem 0xfbfff000-0xfbffffff 64bit pref]
[    0.072554] pci 0000:02:00.0: reg 0x20: [mem 0xfbff8000-0xfbffbfff 64bit pref]
[    0.072565] pci 0000:02:00.0: reg 0x30: [mem 0xfebf0000-0xfebfffff pref]
[    0.072640] pci 0000:02:00.0: supports D1 D2
[    0.072641] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.084022] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.084026] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    0.084029] pci 0000:00:1c.1:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.084034] pci 0000:00:1c.1:   bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
[    0.084107] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.084116] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.084118] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.084121] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.084123] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.084125] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xefffffff window] (subtractive decode)
[    0.084127] pci 0000:00:1e.0:   bridge window [mem 0xf4000000-0xffffffff window] (subtractive decode)
[    0.085053] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.085136] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 11 12 14 15)
[    0.085219] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 11 12 14 15)
[    0.085301] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 11 12 14 15)
[    0.085383] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.085465] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.085548] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.085631] ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
[    0.085939] SCSI subsystem initialized
[    0.085964] libata version 3.00 loaded.
[    0.085964] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.085964] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.085964] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.085964] vgaarb: loaded
[    0.085964] ACPI: bus type USB registered
[    0.085964] usbcore: registered new interface driver usbfs
[    0.085964] usbcore: registered new interface driver hub
[    0.085964] usbcore: registered new device driver usb
[    0.085964] EDAC MC: Ver: 3.0.0
[    0.085964] PCI: Using ACPI for IRQ routing
[    0.085964] PCI: pci_cache_line_size set to 64 bytes
[    0.085964] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.085964] e820: reserve RAM buffer [mem 0xcff70000-0xcfffffff]
[    0.088098] NetLabel: Initializing
[    0.088099] NetLabel:  domain hash size = 128
[    0.088100] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.088118] NetLabel:  unlabeled traffic allowed by default
[    0.088365] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.088368] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.088371] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.090385] clocksource: Switched to clocksource hpet
[    0.103566] VFS: Disk quotas dquot_6.6.0
[    0.103587] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.103725] AppArmor: AppArmor Filesystem Enabled
[    0.103760] pnp: PnP ACPI init
[    0.103868] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.103874] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.103972] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.104261] system 00:02: [io  0x0c00-0x0c0f] has been reserved
[    0.104263] system 00:02: [io  0x0290-0x029f] has been reserved
[    0.104265] system 00:02: [io  0x0a20-0x0a2f] has been reserved
[    0.104267] system 00:02: [io  0x0a30-0x0a3f] has been reserved
[    0.104272] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.104470] system 00:03: [io  0x0400-0x041f] has been reserved
[    0.104472] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.104474] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.104475] system 00:03: [io  0x0480-0x04bf] has been reserved
[    0.104477] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.104479] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.104481] system 00:03: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.104486] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.104634] system 00:04: [mem 0xffc00000-0xffefffff] has been reserved
[    0.104638] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.105247] pnp 00:05: [dma 0 disabled]
[    0.105313] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.105506] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.105508] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.105513] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.105656] system 00:07: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.105661] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.105899] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.105901] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.105903] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.105905] system 00:08: [mem 0x00100000-0xcfffffff] could not be reserved
[    0.105907] system 00:08: [mem 0xf0000000-0xffffffff] could not be reserved
[    0.105911] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.106092] pnp: PnP ACPI: found 9 devices
[    0.114328] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.114346] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.114348] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.114351] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    0.114367] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0000000-0xd01fffff]
[    0.114371] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0200000-0xd03fffff 64bit pref]
[    0.114374] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.114377] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.114379] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.114381] pci 0000:00:01.0:   bridge window [mem 0xfd000000-0xfeafffff]
[    0.114384] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xefffffff 64bit pref]
[    0.114387] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.114389] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.114392] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd01fffff]
[    0.114395] pci 0000:00:1c.0:   bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
[    0.114400] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.114402] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    0.114405] pci 0000:00:1c.1:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.114408] pci 0000:00:1c.1:   bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
[    0.114413] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.114422] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.114423] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.114425] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.114426] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.114428] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xefffffff window]
[    0.114429] pci_bus 0000:00: resource 9 [mem 0xf4000000-0xffffffff window]
[    0.114430] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.114432] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfeafffff]
[    0.114433] pci_bus 0000:01: resource 2 [mem 0xde000000-0xefffffff 64bit pref]
[    0.114435] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.114436] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd01fffff]
[    0.114438] pci_bus 0000:03: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref]
[    0.114439] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.114441] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.114442] pci_bus 0000:02: resource 2 [mem 0xfbf00000-0xfbffffff 64bit pref]
[    0.114444] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.114445] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.114447] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.114448] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.114450] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xefffffff window]
[    0.114451] pci_bus 0000:04: resource 9 [mem 0xf4000000-0xffffffff window]
[    0.114531] NET: Registered protocol family 2
[    0.114844] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.115056] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.115401] TCP: Hash tables configured (established 65536 bind 65536)
[    0.115450] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.115499] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.115580] NET: Registered protocol family 1
[    0.116289] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.116299] PCI: CLS 32 bytes, default 64
[    0.116350] Unpacking initramfs...
[    0.987421] Freeing initrd memory: 64464K
[    0.987480] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.987483] software IO TLB [mem 0xcbf70000-0xcff70000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.987712] Scanning for low memory corruption every 60 seconds
[    0.988416] Initialise system trusted keyrings
[    0.988427] Key type blacklist registered
[    0.988532] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.990089] zbud: loaded
[    0.990612] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.990850] fuse init (API version 7.26)
[    0.993287] Key type asymmetric registered
[    0.993288] Asymmetric key parser 'x509' registered
[    0.993326] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.993403] io scheduler noop registered
[    0.993404] io scheduler deadline registered
[    0.993460] io scheduler cfq registered (default)
[    0.993814] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[    0.994166] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    0.994167] vesafb: scrolling: redraw
[    0.994168] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.994179] vesafb: framebuffer at 0xdf000000, mapped to 0x        (ptrval), using 1216k, total 1216k
[    0.994305] Console: switching to colour frame buffer device 80x30
[    0.994318] fb0: VESA VGA frame buffer device
[    0.994332] intel_idle: does not run on family 6 model 23
[    0.994430] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.994440] ACPI: Power Button [PWRB]
[    0.994481] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.994524] ACPI: Power Button [PWRF]
[    0.995168] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.015570] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.018504] Linux agpgart interface v0.103
[    1.020590] loop: module loaded
[    1.020709] ata_piix 0000:00:1f.1: version 2.13
[    1.021985] scsi host0: ata_piix
[    1.022103] scsi host1: ata_piix
[    1.022147] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.022148] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.022231] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.023572] scsi host2: ata_piix
[    1.023658] scsi host3: ata_piix
[    1.023692] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 23
[    1.023693] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 23
[    1.023793] libphy: Fixed MDIO Bus: probed
[    1.023794] tun: Universal TUN/TAP device driver, 1.6
[    1.023841] PPP generic driver version 2.4.2
[    1.023901] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.023905] ehci-pci: EHCI PCI platform driver
[    1.023989] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.023998] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.024044] ehci-pci 0000:00:1d.7: debug port 1
[    1.027951] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    1.027955] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfcffbc00
[    1.040027] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.040079] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.040082] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.040084] usb usb1: Product: EHCI Host Controller
[    1.040086] usb usb1: Manufacturer: Linux 4.15.0-39-generic ehci_hcd
[    1.040088] usb usb1: SerialNumber: 0000:00:1d.7
[    1.040227] hub 1-0:1.0: USB hub found
[    1.040234] hub 1-0:1.0: 8 ports detected
[    1.040411] ehci-platform: EHCI generic platform driver
[    1.040420] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.040422] ohci-pci: OHCI PCI platform driver
[    1.040430] ohci-platform: OHCI generic platform driver
[    1.040437] uhci_hcd: USB Universal Host Controller Interface driver
[    1.040511] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.040516] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.040521] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.040537] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[    1.040576] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.040578] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.040580] usb usb2: Product: UHCI Host Controller
[    1.040581] usb usb2: Manufacturer: Linux 4.15.0-39-generic uhci_hcd
[    1.040582] usb usb2: SerialNumber: 0000:00:1d.0
[    1.040692] hub 2-0:1.0: USB hub found
[    1.040700] hub 2-0:1.0: 2 ports detected
[    1.040863] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.040867] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.040872] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.040893] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[    1.040932] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.040934] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.040935] usb usb3: Product: UHCI Host Controller
[    1.040936] usb usb3: Manufacturer: Linux 4.15.0-39-generic uhci_hcd
[    1.040938] usb usb3: SerialNumber: 0000:00:1d.1
[    1.041046] hub 3-0:1.0: USB hub found
[    1.041051] hub 3-0:1.0: 2 ports detected
[    1.041202] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.041209] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.041214] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.041235] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[    1.041273] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.041275] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.041277] usb usb4: Product: UHCI Host Controller
[    1.041278] usb usb4: Manufacturer: Linux 4.15.0-39-generic uhci_hcd
[    1.041279] usb usb4: SerialNumber: 0000:00:1d.2
[    1.041390] hub 4-0:1.0: USB hub found
[    1.041395] hub 4-0:1.0: 2 ports detected
[    1.041543] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.041548] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.041553] uhci_hcd 0000:00:1d.3: detected 2 ports
[    1.041576] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
[    1.041617] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.041619] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.041620] usb usb5: Product: UHCI Host Controller
[    1.041621] usb usb5: Manufacturer: Linux 4.15.0-39-generic uhci_hcd
[    1.041623] usb usb5: SerialNumber: 0000:00:1d.3
[    1.041730] hub 5-0:1.0: USB hub found
[    1.041736] hub 5-0:1.0: 2 ports detected
[    1.041863] i8042: PNP: No PS/2 controller found.
[    1.041863] i8042: Probing ports directly.
[    1.042214] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.042219] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.042372] mousedev: PS/2 mouse device common for all mice
[    1.042559] rtc_cmos 00:01: RTC can wake from S4
[    1.042686] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.042707] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.042714] i2c /dev entries driver
[    1.042718] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[    1.042781] device-mapper: uevent: version 1.0.3
[    1.042871] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.042949] ledtrig-cpu: registered to indicate activity on CPUs
[    1.043428] NET: Registered protocol family 10
[    1.048155] Segment Routing with IPv6
[    1.048171] NET: Registered protocol family 17
[    1.048235] Key type dns_resolver registered
[    1.048532] RAS: Correctable Errors collector initialized.
[    1.048561] microcode: sig=0x1067a, pf=0x40, revision=0xa0e
[    1.048647] microcode: Microcode Update Driver: v2.2.
[    1.048657] sched_clock: Marking stable (1048636893, 0)->(1144171538, -95534645)
[    1.048985] registered taskstats version 1
[    1.048994] Loading compiled-in X.509 certificates
[    1.051859] Loaded X.509 cert 'Build time autogenerated kernel key: 28c680bedc8638650c29d29ff1fd33ae66a2014d'
[    1.051884] zswap: loaded using pool lzo/zbud
[    1.055822] Key type big_key registered
[    1.055825] Key type trusted registered
[    1.057759] Key type encrypted registered
[    1.057761] AppArmor: AppArmor sha1 policy hashing enabled
[    1.057764] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.057767] ima: Allocated hash algorithm: sha1
[    1.057783] evm: HMAC attrs: 0x1
[    1.057972]   Magic number: 10:98:895
[    1.058099] rtc_cmos 00:01: setting system clock to 2018-11-27 16:51:49 UTC (1543337509)
[    1.059130] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.059131] EDD information not available.
[    1.191367] ata1.00: ATAPI: Optiarc DVD RW AD-5200A, 1.05, max UDMA/66
[    1.195967] ata1.00: configured for UDMA/66
[    1.198260] scsi 0:0:0:0: CD-ROM            Optiarc  DVD RW AD-5200A  1.05 PQ: 0 ANSI: 5
[    1.200280] ata4.00: ATA-8: ExcelStor Technology J9250S, GM2OA52A, max UDMA/133
[    1.200282] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.204906] ata4.00: configured for UDMA/133
[    1.225671] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    1.225672] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.225796] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.225880] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.272461] ata3.00: ATA-9: SanDisk SD8SBBU240G1122, Z3106000, max UDMA/133
[    1.272463] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    1.275544] ata3.01: ATA-9: WDC WD20EZRZ-00Z5HB0, 80.00A80, max UDMA/133
[    1.275546] ata3.01: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.303329] ata3.00: configured for UDMA/133
[    1.305837] ata3.01: configured for UDMA/133
[    1.306016] scsi 2:0:0:0: Direct-Access     ATA      SanDisk SD8SBBU2 6000 PQ: 0 ANSI: 5
[    1.306234] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.306314] sd 2:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    1.306332] sd 2:0:0:0: [sda] Write Protect is off
[    1.306334] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.306379] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.306394] scsi 2:0:1:0: Direct-Access     ATA      WDC WD20EZRZ-00Z 0A80 PQ: 0 ANSI: 5
[    1.306644] sd 2:0:1:0: Attached scsi generic sg2 type 0
[    1.306677] sd 2:0:1:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    1.306679] sd 2:0:1:0: [sdb] 4096-byte physical blocks
[    1.306697] sd 2:0:1:0: [sdb] Write Protect is off
[    1.306698] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.306730] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.306788] scsi 3:0:0:0: Direct-Access     ATA      ExcelStor Techno A52A PQ: 0 ANSI: 5
[    1.306992] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    1.307002] sd 3:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.307013] sd 3:0:0:0: [sdc] Write Protect is off
[    1.307015] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.307054] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.307718]  sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[    1.330740]  sdb: sdb1
[    1.331000] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.331098] sd 2:0:1:0: [sdb] Attached SCSI disk
[    1.333149]  sdc: sdc1
[    1.333473] sd 3:0:0:0: [sdc] Attached SCSI disk
[    1.336571] Freeing unused kernel memory: 2408K
[    1.352013] Write protecting the kernel read-only data: 20480k
[    1.352776] Freeing unused kernel memory: 2008K
[    1.357476] Freeing unused kernel memory: 1896K
[    1.366147] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.366148] x86/mm: Checking user space page tables
[    1.374340] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.474582] ipmi message handler version 39.2
[    1.475803] ipmi device interface
[    1.476803] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.476815] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.477236] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0x        (ptrval), bc:ae:c5:b4:a9:18, XID 083000c0 IRQ 24
[    1.477237] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.516028] usb 4-2: new low-speed USB device number 2 using uhci_hcd
[    1.522167] nvidia: loading out-of-tree module taints kernel.
[    1.522176] nvidia: module license 'NVIDIA' taints kernel.
[    1.522177] Disabling lock debugging due to kernel taint
[    1.525316] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.536407] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    1.545752] nvidia-nvlink: Nvlink Core is being initialized, major device number 243
[    1.546160] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    1.645659] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  410.78  Sat Nov 10 22:09:04 CST 2018 (using threaded interrupts)
[    1.648019] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  410.78  Sat Nov 10 22:07:09 CST 2018
[    1.648749] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    1.648750] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[    1.727038] usb 4-2: New USB device found, idVendor=04d9, idProduct=2517
[    1.727042] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.759027] random: fast init done
[    1.761078] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.761091] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.761113] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.787883] hidraw: raw HID events driver (C) Jiri Kosina
[    1.894470] usbcore: registered new interface driver usbhid
[    1.894471] usbhid: USB HID core driver
[    1.896958] input: HID 04d9:2517 as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/0003:04D9:2517.0001/input/input5
[    1.956127] hid-generic 0003:04D9:2517.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04d9:2517] on usb-0000:00:1d.2-2/input0
[    1.956680] input: HID 04d9:2517 as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:04D9:2517.0002/input/input6
[    2.012058] tsc: Refined TSC clocksource calibration: 2838.149 MHz
[    2.012064] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28e906d4981, max_idle_ns: 440795282136 ns
[    2.016135] hid-generic 0003:04D9:2517.0002: input,hidraw1: USB HID v1.10 Mouse [HID 04d9:2517] on usb-0000:00:1d.2-2/input1
[    2.217021] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    2.397833] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.409351] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    2.428737] systemd[1]: Detected architecture x86-64.
[    2.433044] systemd[1]: Set hostname to <jeremija-system>.
[    2.592534] systemd[1]: Reached target User and Group Name Lookups.
[    2.592786] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.593013] systemd[1]: Created slice System Slice.
[    2.593148] systemd[1]: Listening on udev Kernel Socket.
[    2.593250] systemd[1]: Listening on Journal Socket.
[    2.594741] systemd[1]: Starting Load Kernel Modules...
[    2.595591] systemd[1]: Mounting POSIX Message Queue File System...
[    2.625792] lp: driver loaded but no devices found
[    2.629759] ppdev: user-space parallel port driver
[    2.635389] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[    2.662082] it87: Found IT8720F chip at 0x290, revision 9
[    2.662256] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x00000000000002AF (\_SB.PCI0.SBRG.SIOR.ECRE) (20170831/utaddress-247)
[    2.662263] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.710366] systemd-journald[274]: Received request to flush runtime journal from PID 1
[    2.906416] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.906675] it87: Found IT8720F chip at 0x290, revision 9
[    2.906705] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x00000000000002AF (\_SB.PCI0.SBRG.SIOR.ECRE) (20170831/utaddress-247)
[    2.906711] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.954154] ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    2.972108] intel_rng: FWH not detected
[    3.024494] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20170831/utaddress-247)
[    3.024502] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.024535] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.026336] leds_ss4200: no LED devices found
[    3.048588] clocksource: Switched to clocksource tsc
[    3.100100] intel_powerclamp: No package C-state available
[    3.112461] snd_hda_intel 0000:01:00.1: Disabling MSI
[    3.112468] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    3.140436] intel_powerclamp: No package C-state available
[    3.142919] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1705: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[    3.142921] snd_hda_codec_via hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.142923] snd_hda_codec_via hdaudioC0D0:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[    3.142924] snd_hda_codec_via hdaudioC0D0:    mono: mono_out=0x0
[    3.142925] snd_hda_codec_via hdaudioC0D0:    inputs:
[    3.142928] snd_hda_codec_via hdaudioC0D0:      Rear Mic=0x1a
[    3.142929] snd_hda_codec_via hdaudioC0D0:      Front Mic=0x1e
[    3.142931] snd_hda_codec_via hdaudioC0D0:      Line=0x1b
[    3.142932] snd_hda_codec_via hdaudioC0D0:      CD=0x1f
[    3.149762] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    3.149825] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    3.149885] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    3.149947] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    3.150003] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    3.214925] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 240
[    3.242726] gpio_ich: GPIO from 462 to 511 on gpio_ich
[    3.315220] it87: Found IT8720F chip at 0x290, revision 9
[    3.315274] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x00000000000002AF (\_SB.PCI0.SBRG.SIOR.ECRE) (20170831/utaddress-247)
[    3.315280] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.477831] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
[    3.478178] caller os_map_kernel_space.part.7+0xda/0x120 [nvidia] mapping multiple BARs
[    3.479250] random: crng init done
[    3.479252] random: 7 urandom warning(s) missed due to ratelimiting
[    3.797543] Adding 1951740k swap on /dev/sda5.  Priority:-2 extents:1 across:1951740k SSFS
[    3.864643] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[    3.864717] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[    3.864779] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[    4.712887] audit: type=1400 audit(1543337513.150:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=721 comm="apparmor_parser"
[    4.712891] audit: type=1400 audit(1543337513.150:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=721 comm="apparmor_parser"
[    4.712894] audit: type=1400 audit(1543337513.150:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=721 comm="apparmor_parser"
[    4.714028] audit: type=1400 audit(1543337513.150:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=718 comm="apparmor_parser"
[    4.714031] audit: type=1400 audit(1543337513.150:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=718 comm="apparmor_parser"
[    4.714034] audit: type=1400 audit(1543337513.150:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=718 comm="apparmor_parser"
[    4.714036] audit: type=1400 audit(1543337513.150:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=718 comm="apparmor_parser"
[    4.714768] audit: type=1400 audit(1543337513.150:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=722 comm="apparmor_parser"
[    4.716630] audit: type=1400 audit(1543337513.154:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=723 comm="apparmor_parser"
[    9.180023] ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[    9.180029] ata3.01: BMDMA stat 0x65
[    9.180033] ata3.01: failed command: READ DMA
[    9.180040] ata3.01: cmd c8/00:00:a8:47:5f/00:00:00:00:00/f0 tag 0 dma 131072 in
                        res 51/40:6f:38:48:5f/00:00:00:00:00/f0 Emask 0x9 (media error)
[    9.180044] ata3.01: status: { DRDY ERR }
[    9.180047] ata3.01: error: { UNC }
[    9.213990] ata3.00: configured for UDMA/133
[    9.238419] ata3.01: configured for UDMA/133
[    9.238485] sd 2:0:1:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    9.238488] sd 2:0:1:0: [sdb] tag#0 Sense Key : Medium Error [current]
[    9.238491] sd 2:0:1:0: [sdb] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[    9.238496] sd 2:0:1:0: [sdb] tag#0 CDB: Read(10) 28 00 00 5f 47 a8 00 01 00 00
[    9.238498] print_req_error: I/O error, dev sdb, sector 6244408
[    9.238516] ata3: EH complete
[   11.956308] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   12.053159] r8169 0000:02:00.0 enp2s0: link down
[   12.053238] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   12.461251] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
[   12.461613] caller os_map_kernel_space.part.7+0xda/0x120 [nvidia] mapping multiple BARs
[   13.892788] r8169 0000:02:00.0 enp2s0: link up
[   13.892798] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   16.675314] rfkill: input handler disabled
[  927.751613] perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 1418.195750] perf: interrupt took too long (3138 > 3133), lowering kernel.perf_event_max_sample_rate to 63500
[ 2951.728028] perf: interrupt took too long (3925 > 3922), lowering kernel.perf_event_max_sample_rate to 50750

Evo slika gdje se crveni, dobro je što sve crveno stane u kadar pface
slika
Do neki dan nisam imao ni jedan bad sektor.

Kod: Označi sve
jeremija@jeremija-system:~$ sudo ntfsfix /dev/sdb1
[sudo] lozinka za jeremija:
Refusing to operate on read-write mounted device /dev/sdb1.


Bertone već tražim račun, mislim da je još pola godine pod garancijom. Da WD blue, 5200 još kupim sporiji da po mojoj logici traje duže :lulz
S rogatim se bodeš samo kada je dobro pečen
Avatar
Postovi: 452
Postovi: 452
Pridružen/a: 20 pro 2015, 15:51
Podijelio/la zahvalu: 108 puta
Primio/la zahvalu: 20 puta
Spol: M
OS: Ubuntu 18.04 i 16.04
ja na tom disku ne bi vrtio nikakav fsck ili ekvivalent, već bi iskopirao sve što mi treba sa njega prvo i onda se igrao jer ovako kako izgleda fsck će ga samo dodatno sjebati i možda nečeš uspjet vratiti podatke.
Es gibt keinen Gott, kein Universum, keine menschliche Rasse, kein irdisches Leben, keinen Himmel, keine Hölle. Es ist alles ein Traum - ein grotesker und dummer Traum. Nichts existiert außer dir. Und du bist nur ein Gedanke - ein vagabundierender Gedanke, ein nutzloser Gedanke, ein heimatloser Gedanke, der verloren in der leeren Ewigkeit wandelt!
Avatar
Moderator
Postovi: 9895
Moderator
Postovi: 9895
Pridružen/a: 07 pro 2007, 18:07
Podijelio/la zahvalu: 158 puta
Primio/la zahvalu: 269 puta
Spol: Y
OS: utuntu 17.04
Garancija istekla 26.10. Aaaa, kao da je tempiran :/
S rogatim se bodeš samo kada je dobro pečen
Avatar
Postovi: 452
Postovi: 452
Pridružen/a: 20 pro 2015, 15:51
Podijelio/la zahvalu: 108 puta
Primio/la zahvalu: 20 puta
Spol: M
OS: Ubuntu 18.04 i 16.04
Potpisujem ovo što kaže @shrike i mala napomena... kad budeš prebacivao podatke, prebacuj malo po malo jer će ti ukoliko odjednom obuhvatiš par desetaka GB sigurno puknuti kopiranje u nekom trenutku.

PS. A ježi ga i garanciju :pogled_dolje
[+ Prikaži] Klik
ThinkPad T440p
Intel Core i5-4300M
Intel HD Graphics 4600
16GB DDR3L
1xSanDisk X400 512 GB & 1x240GB Intel 2500 Pro
15.6" FHD IPS anti-glare
6 & 9 cell Li-Ion battery
OS: kako kada
Slika: dio kolekcije

***

ZEN
"Charlie. What are you thinking?"
"I'm thinking about what I want and what I need."
"What do you want?"
"I want a peaceful soul."
"And what do you need?"
"I need a bigger gun."
Avatar
Site Admin
Postovi: 10238
Site Admin
Postovi: 10238
Pridružen/a: 01 kol 2012, 12:39
Podijelio/la zahvalu: 573 puta
Primio/la zahvalu: 746 puta
Spol: M
OS: LinuxMint Cinnamon
Pokušao sam zamijeniti SATA kabel i uštekati disk u drugi utor. I nema poboljšanja. Jučer je imao 80, jutros 113, a nakon cijelo dnevnog prebacivanja podataka ima 220 loših sektora. I još uvijek piše da je stanje diska dobro.
Zanima me koliko će brzo propasti i kada će pisati da je disk u klincu?
Neću to dugo saznati pošto sam disk odspojio od napajanja i s ATA.
Kako više nemam mjesta gdje prebaciti podatke (važne sam spasio), možda ih sačuva dok ne kupim novi disk?
S rogatim se bodeš samo kada je dobro pečen
Avatar
Postovi: 452
Postovi: 452
Pridružen/a: 20 pro 2015, 15:51
Podijelio/la zahvalu: 108 puta
Primio/la zahvalu: 20 puta
Spol: M
OS: Ubuntu 18.04 i 16.04
Od samog stajanja (dok je isključen) ne bi trebalo doći do nikakve degradacije diska (eventualno ako je u nekim teškim vlažnim uvjetima ili blizu jakih magneta), a koliko bi još mogao tako raditi nema pravila.
[+ Prikaži] Klik
ThinkPad T440p
Intel Core i5-4300M
Intel HD Graphics 4600
16GB DDR3L
1xSanDisk X400 512 GB & 1x240GB Intel 2500 Pro
15.6" FHD IPS anti-glare
6 & 9 cell Li-Ion battery
OS: kako kada
Slika: dio kolekcije

***

ZEN
"Charlie. What are you thinking?"
"I'm thinking about what I want and what I need."
"What do you want?"
"I want a peaceful soul."
"And what do you need?"
"I need a bigger gun."
Avatar
Site Admin
Postovi: 10238
Site Admin
Postovi: 10238
Pridružen/a: 01 kol 2012, 12:39
Podijelio/la zahvalu: 573 puta
Primio/la zahvalu: 746 puta
Spol: M
OS: LinuxMint Cinnamon

Na mreži
Trenutno korisnika/ca: / i 1 gost.