[RIJEŠENO] TV Gigabyte USB kako?

[Vl@do]

Gigabyte
U7000 USB 2.0
Digital TV Dongle
Model name: GT-U7000-RH
Antena, daljinski i CD.
Ispravno radilo nekada na "prozorima". Može li se nekako uglazbiti na moj XUbuntu? (kojim programom i kako) Ako ne proradi, poklanjam nekome kome može poslužiti.

lsusb

Kod:

vlado@Acer:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 004: ID 1d57:0008 
Bus 002 Device 002: ID 0402:7675 ALi Corp.
Bus 001 Device 005: ID 1044:7001 Chu Yuen Enterprise Co., Ltd Gigabyte U7000 DVB-T tuner


dmesg

Kod:

[ 2072.738294] audit_printk_skb: 15 callbacks suppressed
[ 2072.738303] type=1400 audit(1350754473.509:44): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince" pid=3254 comm="apparmor_parser"
[ 2072.741172] type=1400 audit(1350754473.513:45): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince//launchpad_integration" pid=3254 comm="apparmor_parser"
[ 2072.742300] type=1400 audit(1350754473.513:46): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince//sanitized_helper" pid=3254 comm="apparmor_parser"
[ 2072.744711] type=1400 audit(1350754473.517:47): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer" pid=3254 comm="apparmor_parser"
[ 2072.746895] type=1400 audit(1350754473.517:48): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer//launchpad_integration" pid=3254 comm="apparmor_parser"
[ 2072.748117] type=1400 audit(1350754473.521:49): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer//sanitized_helper" pid=3254 comm="apparmor_parser"
[ 2072.750050] type=1400 audit(1350754473.521:50): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer" pid=3254 comm="apparmor_parser"
[ 2072.751685] type=1400 audit(1350754473.521:51): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=3254 comm="apparmor_parser"
[ 2336.484383] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
[10467.666425] chromium-browse[2080]: segfault at 5 ip 39f229c0 sp bfd4c798 error 4 in libflashplayer.so[398c8000+1014000]
[50102.099300] hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[50102.099321] usb 3-1: USB disconnect, device number 2
[50102.396393] usb 3-1: new low-speed USB device number 3 using ohci_hcd
[50102.456411] hub 3-0:1.0: unable to enumerate USB device on port 1
[50109.740395] usb 3-3: new low-speed USB device number 4 using ohci_hcd
[50109.914205] input: 2.4G Wireless Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input12
[50109.915189] generic-usb 0003:1D57:0008.0002: input,hidraw0: USB HID v1.10 Mouse [2.4G Wireless Optical Mouse] on usb-0000:00:12.0-3/input0
[50121.756397] usb 1-1: new high-speed USB device number 4 using ehci_hcd
[50122.128712] IR NEC protocol handler initialized
[50122.162205] IR RC5(x) protocol handler initialized
[50122.241056] dib0700: loaded with support for 21 different device-types
[50122.241415] dvb-usb: found a 'Gigabyte U7000' in cold state, will try to load a firmware
[50122.259734] IR RC6 protocol handler initialized
[50122.293819] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[50122.309855] IR JVC protocol handler initialized
[50122.351529] IR Sony protocol handler initialized
[50122.358519] IR MCE Keyboard/mouse protocol handler initialized
[50122.371373] lirc_dev: IR Remote Control driver registered, major 249
[50122.376523] IR LIRC bridge handler initialized
[50122.535818] dib0700: firmware started successfully.
[50123.036661] dvb-usb: found a 'Gigabyte U7000' in warm state.
[50123.036871] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[50123.037893] DVB: registering new adapter (Gigabyte U7000)
[50123.394222] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[50123.468280] MT2060: successfully identified (IF1 = 1220)
[50124.068300] Registered IR keymap rc-dib0700-rc5
[50124.069462] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-1/rc/rc0/input13
[50124.069877] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-1/rc/rc0
[50124.070228] dvb-usb: schedule remote query interval to 50 msecs.
[50124.070247] dvb-usb: Gigabyte U7000 successfully initialized and connected.
[50124.074224] usbcore: registered new interface driver dvb_usb_dib0700
[50179.787354] ISO 9660 Extensions: Microsoft Joliet Level 3
[50179.854492] ISOFS: changing to secondary root
[50394.689935] usb 1-1: USB disconnect, device number 4
[50394.723483] dvb-usb: Gigabyte U7000 successfully deinitialized and disconnected.
[51739.408396] usb 1-1: new high-speed USB device number 5 using ehci_hcd
[51739.545379] dvb-usb: found a 'Gigabyte U7000' in cold state, will try to load a firmware
[51739.555216] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[51739.785381] dib0700: firmware started successfully.
[51740.288614] dvb-usb: found a 'Gigabyte U7000' in warm state.
[51740.288831] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[51740.289968] DVB: registering new adapter (Gigabyte U7000)
[51740.648690] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[51740.653618] MT2060: successfully identified (IF1 = 1220)
[51741.172892] Registered IR keymap rc-dib0700-rc5
[51741.173382] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-1/rc/rc1/input14
[51741.173609] rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-1/rc/rc1
[51741.174142] dvb-usb: schedule remote query interval to 50 msecs.
[51741.174162] dvb-usb: Gigabyte U7000 successfully initialized and connected.


Zadnja izmjena: Vl@do; 26 lis 2012, 08:01; ukupno mijenjano 1 put/a.

Pa radi ti normalno.
Sve je prepoznato i instalirano.
Ako ne znaš s kojim programom gledati TV probaj Me-Tv ili Kaffeine
Kaffeine obično ljudi koriste.
http://wiki.open.hr/wiki/Kako_gledati_TV

@Vlado
Nije za pohvaliti se, ali isti TV USB, također sve prepoznato, ali u Kaffeineu kod skeniranja ne nađe niti jedan dostupni program (pod win radi normalno),... a išao sam tak daleko da sam kako bih isključio mogućnost lošeg signala jedan dan otišao autom do Prisavlja ,... pa ak tebi proradi, javi kako

[Vl@do]

Evo Me-TV radi ali samo četiri kanala za sada. I dosta loš signal. Pada mi na pamet da umjesto ove antenice uštekam svoj kabel od kablovske. Čim stavim antenu na prozor malo je bolje. Opet se vračam na ono RTFM. (sam sebi to govorim)
Onaj Sukov link je riješio (dvb-channels.conf)
A Kaffein nikako na žalost. Još ću se malo poigrati možda nešto i izkemijam.

Zadnja izmjena: Vl@do; 21 lis 2012, 10:57; ukupno mijenjano 1 put/a.

Vlado care!

Zaboravi te male antenice. Mora biti prava antena.
U Kaffeine odi na Television-> Configure ->General options tab -> Update scan data over internet.
Onda odi na tab device1, device2, itd..., pa u Source padajućoj listi izabereš HR-All.

Postoji riješenje, naravno. Na Ubuntu forumu dobio ovaj link: http://wiki.open.hr/wiki/Hardver:Gigaby ... T-U7000-RH
Sram me bilo što se odmah nisam sjetio wiki.open.hr

Sad sam tek uočio da se cijela sekcija s popisima hardvera raspala uslijed migracije na novi server. Uglavnom, sad je popravljeno.

A kad je netko to prijavio...

Sad sam tek uočio da se cijela sekcija s popisima hardvera raspala uslijed migracije na novi server. Uglavnom, sad je popravljeno.

Uf! Ja sam mislio da nam je uletio bot koji je sve pobrisao.