Switch to full style
Novi ste u svijetu Linuxa? Imate hrpu početničkih pitanja?

Pravila foruma

PRAVILA ZA NOVE KORISNIKE LINUXA!
Prije otvaranja bilo kakve diskusije svaki novi korisnik u svijetu Linuxa obavezan je učiniti sljedeće korake:
Pročitati ove tekstove iz naše Wikipedije:
- Sve uvodne tekstove Linuxa za početnike (njih 5)
- Sve što trebate znati o radu s diskovima
- Pročitati ovu temu za početnike
- Pokušati pronaći riješenje problema u Enciklopediji znanja

Nakon toga korisnik smije otvoriti temu s naslovom svog problema uz obaveznu naznaku Linux distribucije koju koristi u formi:
[Linux distribucija, broj verzije, grafičko okruženje]: Naslov problema
U prvom postu korisnik obavezno mora odgovoriti na ova pitanja:
- Da li ima instalirane Windowse?
- Što ga je motiviralo na instaliranje i korištenje Linux distribucije?
- Obavezno je potrebno navesti specifikacije hardvera (Ime Laptopa, tip procesora, grafičke i mrežne kartice, količina RAM-a i diska)

Bez učinjenih ovih prvih koraka, na teme se neće odgovarati i one će biti izbrisane s foruma!
Odgovori

[RIJEŠENO] mint 13 i win 7 sharing problem

16 vel 2014, 21:11

Screenshot.png
screenshot.png,
Screenshot.png (29.15 KiB) Pogledano 2771 put/a.
Imam 3 racunala, VU satelitski receiver i fritzbox. Svi su na istoj mrezi. 2 win7pc i jedno win7 i mint dual boot. U sva tri racunala imam work group. Kad su sva racunala 3 kom na win svi vide sve kaj se shera. Kad ovo jedno linux racunalo na mint 13 stavim u mrezu isheranje. Druga racunala vide sherani folder download od mint, i cak sheranu particiju windowsa (sa tog racunala) koju sam stavio da bude uvijek mountana. No linux racunalo ne vidi, odnosno vidi druga racunala, ali nemoze otvoriti folder. Naprimjer na racunalu toshiba win7, koji ima sheranu particiju D, i u njemu foldere, jedan folder nemoze otvoriti i pise failed to mount windows share (folder download skidanaja), drugi folder cak otvara (toshiba laptop d), na drugom racunalu stalno trazi password... itd..
trazio sam na internetu, ali nije bas lako naci kako to rijesiti.... Probat cu uploadati slike screen shootove, i izgled moje samba share file...
Cudno mi je to da win7 racunala vide sve i mogu otvoriti sve kaj sheram sa minta, a obrnuto ne, samo jedan folder otvara na jednom racunalau, druge nece, drugo racunalo trazi passworde itd....
evo moog samba share file... pa ak se tu kaj da napraviti... molio bih pomoc..., dole sam i slike postao da se vidi....
hvala...

Kod:
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
#   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe. 
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe. 
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home director as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# The following parameter makes sure that only "username" can connect
#
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

wins support = no
[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#   cdrom share is accesed. For this to work /etc/fstab must contain
#   an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#   is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom


[Downloads]
path = /home/hp/Downloads
available = yes
browsable = yes
public = yes
writable = no

[PODACI]
path = /media/PODACI
available = yes
browsable = yes
public = yes
writable = no
Privitak/ci
Screenshot-3.png
screenshot3.png
Screenshot-3.png (47.44 KiB) Pogledano 2771 put/a.
Screenshot-2.png
screenshot2.png
(99.71 KiB) Preuzeto 4 put/a.
Screenshot-1.png
screenshot-1.png
Screenshot-1.png (50.29 KiB) Pogledano 2771 put/a.

Re: mint 13 i win 7 sharing problem

20 vel 2014, 08:01

Rijesio sam sheranje --> barem kod mene na jednostavan nacin. Trazeci po internetu nasao sam clanak da Windoes share se mora ponovno restartati ako je bio prije postavljen nego je dosla linux masina.
Dakle ovako. Imao sam tri caunala u mrezi na win7 + printer. kako sam cetvrto racunalo prebacio na linux mint, i prilikom instalacije minta me je pitao zelim li na home network --> kod mene Workgroup. Ja sam rekao da. nakon potpune instalacije Minta 13 mate, u njemu je vec bila samba, znaci u njoj nisam morao nista podesavati, nego sam samo napravio sheranje foldera iz Minta koje zelim, na primjer Folder Home/download, Selektirao sam folder Download, desni gumb i selektirao smb share. Restartao racunalo sa Mintom i sva ostala win7 racunala to vide. Mint je vidio ostala racunala, no nije mogao pristupiti sheranim win7 folderima i izbacivao poruku failed to mount windows share. Na svim win 7 racunalima sam iskljucio passworde za home sharing, te napravio ponovno reshare foldera koje zelim. Dakle ponistio sam sheranje foldera i ponovno sherao te foldere. Restartao win racunala, restartao Mint i nakon toga sam vidio u Mintu sherane foldere od dva racunala, a trece opet nisam mogao otvoriti sherani folder (odnosno cijelu particiju D na win 7). Onda sam to malo proucavao i mislio kaj je sad. I napravio jos nesto. To sve sa e particije D sam presnimio na ext. disk. Otisao u Paragon i formatirao particiju D (tu od win 7 koja se nije vidjela u Mintu), ponovno dignuo win 7. Particija je ostala sherana i dao sam full controll ostalim userima kako win 7 tako i Mintu. Upalio Mint i mogao konacno otvoriti sherani folder od tog treceg racunala. Vratio podatke sa ext diska na tu sheranu particiju D, i Mint sada i to vidi. Dakle sve radi.

Poanta je da nakon ukljucivanja Minta u postojecu Home grupu, treba samo win 7 racunala unsherati i ponovno sherati i to bi trebalo raditi. Barem radi kod mene. Jos jedan podatak, da su sva racunala spojena na router Fritzbox --> dakle sav internet ide preko njega, naravno i njega vidim u mrezi, i jos vidim u mrezi VU+ Uno (satelitski receiver). Sad konacno sve radi! :bravo
Odgovori