Sada je: 18 stu 2019, 12:58.
Novi ste u svijetu Linuxa? Imate hrpu početničkih pitanja?

Moderator/ica: Moderatori/ce

Pravila foruma
PRAVILA ZA NOVE KORISNIKE LINUXA!
Prije otvaranja bilo kakve diskusije svaki novi korisnik u svijetu Linuxa obavezan je učiniti sljedeće korake:
Pročitati ove tekstove iz naše Wikipedije:
- Sve uvodne tekstove Linuxa za početnike (njih 5)
- Sve što trebate znati o radu s diskovima
- Pročitati ovu temu za početnike
- Pokušati pronaći riješenje problema u Enciklopediji znanja

Nakon toga korisnik smije otvoriti temu s naslovom svog problema uz obaveznu naznaku Linux distribucije koju koristi u formi:
[Linux distribucija, broj verzije, grafičko okruženje]: Naslov problema
U prvom postu korisnik obavezno mora odgovoriti na ova pitanja:
- Da li ima instalirane Windowse?
- Što ga je motiviralo na instaliranje i korištenje Linux distribucije?
- Obavezno je potrebno navesti specifikacije hardvera (Ime Laptopa, tip procesora, grafičke i mrežne kartice, količina RAM-a i diska)

Bez učinjenih ovih prvih koraka, na teme se neće odgovarati i one će biti izbrisane s foruma!
Kod: Označi sve
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.

## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out.  Use either ; or # for
## commenting.

; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no

; high-priority = yes
; nice-level = -11

; realtime-scheduling = yes
; realtime-priority = 5

; exit-idle-time = 20
; scache-idle-time = 20

; dl-search-path = (depends on architecture)

; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa

; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0

resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = no

[b]flat-volumes = no[/b]

; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 1000000

; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right

default-fragments = 8
default-fragment-size-msec = 10

; enable-deferred-volume = yes
deferred-volume-safety-margin-usec = 1
; deferred-volume-extra-delay-usec = 0



naredba pacmd list-sink mi je izbacila ovo
Kod: Označi sve
>>> 2 sink(s) available.
    index: 0
   name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
   driver: <module-alsa-card.c>
   flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
   state: SUSPENDED
   suspend cause: IDLE
   priority: 9959
   volume: 0:  53% 1:  53%
           0: -16,52 dB 1: -16,52 dB
           balance 0,00
   base volume: 100%
                0,00 dB
   volume steps: 65537
   muted: no
   current latency: 0,00 ms
   max request: 0 KiB
   max rewind: 0 KiB
   monitor source: 0
   sample spec: s16le 2ch 44100Hz
   channel map: front-left,front-right
                Stereo
   used by: 0
   linked by: 1
   configured latency: 0,00 ms; range is 0,50 .. 371,52 ms
   card: 0 <alsa_card.pci-0000_00_1b.0>
   module: 4
   properties:
      alsa.resolution_bits = "16"
      device.api = "alsa"
      device.class = "sound"
      alsa.class = "generic"
      alsa.subclass = "generic-mix"
      alsa.name = "ALC663 Analog"
      alsa.id = "ALC663 Analog"
      alsa.subdevice = "0"
      alsa.subdevice_name = "subdevice #0"
      alsa.device = "0"
      alsa.card = "0"
      alsa.card_name = "HDA Intel PCH"
      alsa.long_card_name = "HDA Intel PCH at 0xf7a10000 irq 45"
      alsa.driver_name = "snd_hda_intel"
      device.bus_path = "pci-0000:00:1b.0"
      sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
      device.bus = "pci"
      device.vendor.id = "8086"
      device.vendor.name = "Intel Corporation"
      device.product.id = "1e20"
      device.product.name = "N56VZ"
      device.form_factor = "internal"
      device.string = "front:0"
      device.buffering.buffer_size = "65536"
      device.buffering.fragment_size = "32768"
      device.access_mode = "mmap+timer"
      device.profile.name = "analog-stereo"
      device.profile.description = "Analog Stereo"
      device.description = "Built-in Audio Analog Stereo"
      alsa.mixer_name = "Realtek ALC663"
      alsa.components = "HDA:10ec0663,10431477,00100002"
      module-udev-detect.discovered = "1"
      device.icon_name = "audio-card-pci"
   ports:
      analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
         properties:
            
      analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
         properties:
            device.icon_name = "audio-speakers"
      analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
         properties:
            device.icon_name = "audio-headphones"
   active port: <analog-output-speaker>
  * index: 1
   name: <ladspa_output.mbeq_1197.mbeq>
   driver: <module-ladspa-sink.c>
   flags: HW_MUTE_CTRL LATENCY DYNAMIC_LATENCY
   state: SUSPENDED
   suspend cause: IDLE
   priority: 1000
   volume: 0:  53% 1:  53%
           balance 0,00
   base volume: 100%
   volume steps: 65537
   muted: no
   current latency: 0,00 ms
   max request: 0 KiB
   max rewind: 0 KiB
   monitor source: 2
   sample spec: float32le 2ch 44100Hz
   channel map: front-left,front-right
                Stereo
   used by: 0
   linked by: 0
   configured latency: 0,00 ms; range is 0,50 .. 371,52 ms
   module: 19
   properties:
      device.master_device = "alsa_output.pci-0000_00_1b.0.analog-stereo"
      device.class = "filter"
      device.ladspa.module = "mbeq_1197"
      device.ladspa.label = "mbeq"
      device.ladspa.name = "Multiband EQ"
      device.ladspa.maker = "Steve Harris <steve@plugin.org.uk>"
      device.ladspa.copyright = "GPL"
      device.ladspa.unique_id = "1197"
      device.description = "LADSPA Plugin Multiband EQ on Built-in Audio Analog Stereo"
      device.icon_name = "audio-card"


i editirao sam onaj falj kako si mi rekao
Kod: Označi sve
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)

.nofail

### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
#load-sample-lazy pulse-hotplug /usr/share/sounds/linuxmint-login.wav
#load-sample-lazy pulse-coldplug /usr/share/sounds/linuxmint-login.wav
#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
load-sample-dir-lazy /usr/share/sounds/LinuxMint/stereo

.fail

### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore

### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties

### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink

### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect use_ucm=0
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif

### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif

### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif

.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif

### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish

### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor

### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif

### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Honour intended role device property
load-module module-intended-roles

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif

### Enable positioned event sounds
load-module module-position-event-sounds

### Cork music/video streams when a phone stream is active
#load-module module-role-cork

### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply

### Load DBus protocol
#.ifexists module-dbus-protocol.so
#load-module module-dbus-protocol
#.endif

# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.

### Load X11 bell module
#load-module module-x11-bell sample=bell-windowing-system

### Register ourselves in the X11 session manager
#load-module module-x11-xsmp

### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif

load-module module-switch-on-port-available

### Make some devices default
#set-default-sink output
#set-default-source input

#set-sink-volume 0 50%
#set-source-volume 0 50%


ali zvuk je opet na maximumu pri pokretanju
Postovi: 22
Postovi: 22
Pridružen/a: 26 kol 2011, 10:43
Podijelio/la zahvalu: 1 puta
Primio/la zahvalu: 0 puta
Spol: M
Abzeenth je napisao/la:

bozic.hrvoje je napisao/la:editirao sam onaj falj kako si mi rekao

"rekla"
Avatar
Postovi: 1795
Postovi: 1795
Pridružen/a: 15 sij 2014, 09:37
Lokacija: Zaljev svetaca
Podijelio/la zahvalu: 68 puta
Primio/la zahvalu: 177 puta
Spol:
OS: Leap 15 / Linux Mint 19
bozic.hrvoje je napisao/la:
i editirao sam onaj falj kako si mi rekao
Kod: Označi sve
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)

.nofail

### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
#load-sample-lazy pulse-hotplug /usr/share/sounds/linuxmint-login.wav
#load-sample-lazy pulse-coldplug /usr/share/sounds/linuxmint-login.wav
#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
load-sample-dir-lazy /usr/share/sounds/LinuxMint/stereo

.fail

### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore

### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties

### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink

### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect use_ucm=0
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif

### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif

### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif

.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif

### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish

### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor

### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif

### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Honour intended role device property
load-module module-intended-roles

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif

### Enable positioned event sounds
load-module module-position-event-sounds

### Cork music/video streams when a phone stream is active
#load-module module-role-cork

### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply

### Load DBus protocol
#.ifexists module-dbus-protocol.so
#load-module module-dbus-protocol
#.endif

# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.

### Load X11 bell module
#load-module module-x11-bell sample=bell-windowing-system

### Register ourselves in the X11 session manager
#load-module module-x11-xsmp

### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif

load-module module-switch-on-port-available

### Make some devices default
#set-default-sink output
#set-default-source input

#set-sink-volume 0 50%
#set-source-volume 0 50%


ali zvuk je opet na maximumu pri pokretanju


Ovo zadnje ti ne valja. Ne smiješ ostaviti # ispred tih linija koje si dodao. U konfiguracijskim fajlovima na Linuxu (ne uvijek, ali u većini slučajeva), # označava "zakomentiranu" tj. isključenu opciju, nešto što se ne primjenjuje. Makni te #, spremi pa probaj ponovno. Trebalo bi raditi...
Avatar
Site Admin
Postovi: 6506
Site Admin
Postovi: 6506
Pridružen/a: 06 lip 2009, 23:16
Lokacija: Online
Podijelio/la zahvalu: 621 puta
Primio/la zahvalu: 628 puta
OS: Mint 17.3 KDE 4.14.13
i dalje zvuk ostaje na 100% :(
Postovi: 22
Postovi: 22
Pridružen/a: 26 kol 2011, 10:43
Podijelio/la zahvalu: 1 puta
Primio/la zahvalu: 0 puta
Spol: M
A sjećaš li se je li radilo prije nego si instalirao taj equalizer? Možda da pogledaš u njegovim postavkama, moguće je da se nešto poremetilo... Nažalost ti ne mogu dalje puno pomoći, to je bug prijavljen prije par godina i još uvijek nije riješen :ljut2 Ako nađem neke informacije, napisat ću ti ovdje, a možda se još netko priključi temi u međuvremenu.
Avatar
Site Admin
Postovi: 6506
Site Admin
Postovi: 6506
Pridružen/a: 06 lip 2009, 23:16
Lokacija: Online
Podijelio/la zahvalu: 621 puta
Primio/la zahvalu: 628 puta
OS: Mint 17.3 KDE 4.14.13
taj problem se počeo javljat tek nakon instalacije tog equilizera, prije je bilo normalno...da li možda postoji neki drugi equilizer kojim bi trenutnog mogao zamijeniti?
Postovi: 22
Postovi: 22
Pridružen/a: 26 kol 2011, 10:43
Podijelio/la zahvalu: 1 puta
Primio/la zahvalu: 0 puta
Spol: M
http://askubuntu.com/questions/589245/i ... default-pa

Kod: Označi sve
sudo leafpad /usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common


promijeni:
Kod: Označi sve
volume = ignore

pročitaj gore iz linka za detalje i probaj
Avatar
Postovi: 1795
Postovi: 1795
Pridružen/a: 15 sij 2014, 09:37
Lokacija: Zaljev svetaca
Podijelio/la zahvalu: 68 puta
Primio/la zahvalu: 177 puta
Spol:
OS: Leap 15 / Linux Mint 19
bozic.hrvoje je napisao/la:taj problem se počeo javljat tek nakon instalacije tog equilizera, prije je bilo normalno...da li možda postoji neki drugi equilizer kojim bi trenutnog mogao zamijeniti?


Pa jesi probao najbanalnije rješenje : deinstalirati taj equilizer i počistiti sistem od zaostataka pa vidjeti situaciju ?
Max Bunker
Max Bunker
Poz! Ja imam sličan problem na Mintu 17.1 Cinnamon.
Kod mene uredno zapamti jačinu zvuka na glavnom audio izlazu, ali prednji izlaz za slušalice konstantno vraća na 100%.

Ovako sam ja riješio problem:
Kao obični korisnik u konzolu upiši:
Kod: Označi sve
alsamixer

slika
Sa strelicama na tipkovnici naštimaj postavke zvuka kako ti odgovara i izađi sa ESC.

Da bi spremio postavke u datoteku, u konzolu upiši:
Kod: Označi sve
alsactl -f ~/my_alsa_state store


Sada je samo potrebno učitati postavke prilikom podizanja računala.
Ja sam dodao naredbu u System Settings -> Startup Programs.
Kod: Označi sve
alsactl -f /home/rusty/my_alsa_state restore

slika

Iz nekog razloga naredba radi samo ako upišem punu putanju do datoteke.
Samo promjeni "rusty" u svoje korisničko ime i trebalo bi raditi.

Javi rezultate.
Avatar
Postovi: 127
Postovi: 127
Pridružen/a: 09 sij 2015, 17:24
Podijelio/la zahvalu: 49 puta
Primio/la zahvalu: 29 puta
Spol: M
OS: Linux Mint 17
rusty je napisao/la:Poz! Ja imam sličan problem na Mintu 17.1 Cinnamon.
Kod mene uredno zapamti jačinu zvuka na glavnom audio izlazu, ali prednji izlaz za slušalice konstantno vraća na 100%.

Ovako sam ja riješio problem:
Kao obični korisnik u konzolu upiši:
Kod: Označi sve
alsamixer

slika
Sa strelicama na tipkovnici naštimaj postavke zvuka kako ti odgovara i izađi sa ESC.

Da bi spremio postavke u datoteku, u konzolu upiši:
Kod: Označi sve
alsactl -f ~/my_alsa_state store


Sada je samo potrebno učitati postavke prilikom podizanja računala.
Ja sam dodao naredbu u System Settings -> Startup Programs.
Kod: Označi sve
alsactl -f /home/rusty/my_alsa_state restore

slika

Iz nekog razloga naredba radi samo ako upišem punu putanju do datoteke.
Samo promjeni "rusty" u svoje korisničko ime i trebalo bi raditi.

Javi rezultate.


izgleda da ovo radi sada kako treba...testirat ću još par dana pa javim konačne rezultate..ali za sada puno hvala :-D :-D :-D ::bravo
Postovi: 22
Postovi: 22
Pridružen/a: 26 kol 2011, 10:43
Podijelio/la zahvalu: 1 puta
Primio/la zahvalu: 0 puta
Spol: M

Na mreži
Trenutno korisnika/ca: / i 2 gostiju.