[Riješeno] D link DWA-123 i LMDE

[rudar]

Zamolio bih za savjet uz sljedeći problem: imam bežični stick N 150 easy USB adapter DWA-123, koji ne radi na kućnom računalu uz LMDE. Problem se vuče od ranije, ništa se nije promijenilo uz noviji kernel 3.10-2. Međutim, kad sam pokretao uživo Sabayon 11, LM 12, Ubuntu 12.04 i napokon Debian Wheezy 7.1, uređaj je uvijek pravilno radio. Da stvar bude još zanimljivija, radio je i kad sam ga isprobao na drugom računalu, koje također ima samo LMDE. Dakle, ISPRAVNO radi na ovome:

System: Host lmde Kernel 3.10-2-amd64 x86_64 (64 bit) Distro LinuxMint 1 debian
CPU: Dual core Pentium E5400 (-MCP-) cache 2048 KB flags (lm nx sse sse2 sse3 ssse3 vmx)
Clock Speeds: (1) 2700.055 MHz (2) 2700.055 MHz
Graphics: Card Intel 4 Series Chipset Integrated Graphics Controller X.Org 1.12.4 Res: 1680x1050@59.9hz
GLX Renderer Mesa DRI Intel G41 GLX Version 2.1 Mesa 9.1.6
Audio: Card Intel NM10/ICH7 Family High Definition Audio Controller driver snd_hda_intel
Sound: Advanced Linux Sound Architecture Version k3.10-2-amd64
Network: Card Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet driver ATL1E
Disks: HDD Total Size: 660.5GB (4.4% used) 1: /dev/sdb WDC_WD6400AAKS 640.1GB
2: /dev/sda QUANTUM_FIREBALL 20.4GB
Partition: ID:/ size: 587G used: 27G (5%) fs: ext4
Sensors: System Temperatures: cpu: 32.0C mobo: 30.0C
Fan Speeds (in rpm): cpu: 856 sys-1: 0
Info: Processes 148 Uptime 15 min Memory 391.1/1977.7MB Client Shell inxi 1.4.23

S ovim pak NE radi, a trebao bi:

System: Host rudarlmde Kernel 3.2.0-3-amd64 x86_64 (64 bit) Distro Linux Mint Debian Edition
CPU: Dual core Intel Core i3-2120 (-HT-MCP-) cache 3072 KB flags (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx)
Clock Speeds: (1) 1600.00 MHz (2) 1600.00 MHz (3) 1600.00 MHz (4) 1600.00 MHz
Graphics: Card Intel 2nd Generation Core Processor Family Integrated Graphics Controller X.Org 1.12.1.902 Res: 1920x1080@60.0hz
GLX Renderer Mesa DRI Intel Sandybridge Desktop GLX Version 3.0 Mesa 8.0.3
Audio: Card Intel 6 Series/C200 Series Chipset Family High Definition Audio Controller driver snd_hda_intel
Sound: Advanced Linux Sound Architecture Version 1.0.24
Network: Card Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver r8169
Disks: HDD Total Size: 500.1GB (-) 1: /dev/sda Hitachi_HDS72105 500.1GB
Partition: ID:/ size: 454G used: 29G (7%) fs: rootfs ID:/ size: 454G used: 29G (7%) fs: ext4
ID:swap-1 size: 4.19GB used: 0.00GB (0%) fs: swap
Sensors: System Temperatures: cpu: 36.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes 155 Uptime 15 min Memory 388.7/3873.4MB Client Shell inxi 1.4.23

Ovdje sam naveo stariji ispis, ali ništa se nije promijenilo ni poslije UP-7. Kad ubacim taj stick, nema nikakvog signala (a ubačen jest!). Vidim ga u terminalu kad pokrenem naredbu lsusb, ali ne aktivira se. Imate li neko rješenje?

[PunkBastard]

Noviji je kernel na ovome koji radi, stavi kernel 3.11 je trenutno zadnji stabilni.

[rudar]

Dolazi u obzir, hvala, ali nisam uvjeren da je u tome stvar. Naime, nabrojene razne distre imale su stariji kernel (osobito LM 12), pa je s njima ovo svejedno radilo. Osim toga, kako objasniti da isti LMDE UP-7 na drugom računalu aktivira ovaj uređaj? Tamo radi i vidim mrežu, a ovdje ne. Bizarno!

Naglašavam: na oba računala prošla je nadogradnja, oba imaju kernel 3.10-2, jedino sam u ovome postu dao stari ispis konfiguracije.

[PunkBastard]

ajde daj

Kod: Označi sve

lspci -k

za oba.
edit: ako "-k" ne radi, stavi "-v"

[rudar]

Kod: Označi sve

00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
	Subsystem: ASUSTeK Computer Inc. Device 836d
	Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
	Subsystem: ASUSTeK Computer Inc. Device 836d
	Kernel driver in use: i915
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
	Subsystem: ASUSTeK Computer Inc. Device 83bc
	Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
	Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01)
	Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
	Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard
	Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
	Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard
	Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
	Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard
	Kernel driver in use: uhci_hcd
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
	Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard
	Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
	Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard
	Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
	Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard
	Kernel driver in use: lpc_ich
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
	Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard
	Kernel driver in use: ata_piix
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)
	Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard
	Kernel driver in use: ata_piix
01:00.0 Ethernet controller: Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0)
	Subsystem: ASUSTeK Computer Inc. P5KPL-CM Motherboard
	Kernel driver in use: ATL1E

Napomena: ovo je ispis za računalo na kojem radi, tj. uređaj je aktiviran, vidi mrežu, ali ne mogu preko njega i doći na internet. Dakle, ne mogu se spojiti. Na drugom računalu (koje mi trenutno nije dostupno, pa ne mogu sad dati ni traženi ispis) niti se aktivira uređaj, niti se, naravno, vidi mreža, niti se mogu spojiti. A tamo nije bilo problema kad sam pokrenuo Debian 7.1 Stable XFCE, kojemu je kernel 3.2!

Edit by nicky:
radi preglednosti ispise iz terminala stavljamo u code tag.

[PunkBastard]

Dali je uređaj bio uključen kada si izvršio naredbu ? I ako možeš, što prije i na drugom računalu isto napraviti, možda je problem u kernel driveru pa sam mislio usporediti.

[shicy]

ako je čudo radilo na Debianu, znači da radi sa firmware-linux-free paketom. provjeri imaš li ga na računalu na kojem ne radi

[jurastublic]

PunkBastard, uređaj je USB stik a ti si ga tražio lspci umjesto lsusb, zato nema ništa na listingu.

[PunkBastard]

PunkBastard, uređaj je USB stik a ti si ga tražio lspci umjesto lsusb, zato nema ništa na listingu.

Eh da, uglavnom, lsusb -v

[rudar]

Evo, na onom 'spornom' računalu, poslije lsusb mislim da je bitno samo ovo:

Bus 001 Device 005: ID 2001:3c17 D-Link Corp. DWA-123 Wireless N 150 Adapter(rev.A1) [Ralink RT3370]

a poslije naredbe lsusb -v bitno je valjda ovo:

Bus 001 Device 005: ID 2001:3c17 D-Link Corp. DWA-123 Wireless N 150 Adapter(rev.A1) [Ralink RT3370]
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x2001 D-Link Corp.
idProduct 0x3c17 DWA-123 Wireless N 150 Adapter(rev.A1) [Ralink RT3370]
bcdDevice 1.01
iManufacturer 1 Ralink
iProduct 2 11n Adapter
iSerial 0
bNumConfigurations 1

I da, uređaj je uključen, inače ne bi bilo ni ovog ispisa.