Stranica: 5/12.
Re: Conky
Postano: 16 ožu 2010, 12:01
Postao/la domi
Već par dana se "mučim" staviti weather na conky
ali mi naravno ne uspjeva,skoro sve sam radio po uputama
how to,logirao na
http://www.weather.com/weather/today/Ri ... a+HRXX0006
Neznam di trebam sejvati ni šta kako tamo piše pa molim malu pomoć.
P:S:_Nije hitno kad stignete
Kod: Označi sve
${cpubar 4 cpu1}
${cpugraph}
RAM ${alignr}$mem / $memmax ($memperc%)
${membar 4}
SWAP ${alignr}$swap / $swapmax ($swapperc%)
${swapbar 4}
Highest CPU $alignr CPU% MEM%
${top name 1}$alignr${top cpu 1}${top mem 1}
${top name 2}$alignr${top cpu 2}${top mem 2}
${top name 3}$alignr${top cpu 3}${top mem 3}
Highest MEM $alignr CPU% MEM%
${top_mem name 1}$alignr${top_mem cpu 1}${top_mem mem 1}
${top_mem name 2}$alignr${top_mem cpu 2}${top_mem mem 2}
${top_mem name 3}$alignr${top_mem cpu 3}${top_mem mem 3}
FILESYSTEM ${hr 1}${color}
Root: ${alignr}${fs_free /} / ${fs_size /}
${fs_bar 4 /}
NETWORK ${hr 1}${color}
Down ${downspeed eth0} k/s ${alignr}Up ${upspeed eth0} k/s
${downspeedgraph eth0 25,107} ${alignr}${upspeedgraph eth0 25,107}
Total ${totaldown eth0} ${alignr}Total ${totalup eth0}
WEATHER ${hr 2}
${if_existing /proc/net/route eth0}
${voffset -8}${alignr 56}${font ConkyWeather:style=Bold:size=40}${execi 600 conkyForecast --location=HRXX0006 --datatype=WF}${font}
${voffset -52}${font Weather:size=40}y${font} ${voffset -38}${font Trebuchet MS:size=26}${execi 600 conkyForecast --location=HRXX0006 --datatype=HT}${font}
${voffset 0}Humidity: ${alignr}${execi 600 conkyForecast --location=HRXX0006 --datatype=HM}
${voffset 0}Moon Phase: ${alignr}${execi 600 conkyForecast --location=HRXX0006 --datatype=MP}
${voffset 0}${font}Wind Speed: ${alignr}${execi 600 conkyForecast --location=HRXX0006 --datatype=WS}
${else}${if_existing /proc/net/route eth0}
${voffset -8}${alignr 56}${font ConkyWeather:style=Bold:size=40}${execi 600 conkyForecast --location=HRXX0006 --datatype=WF}${font}
${voffset -52}${font Weather:size=40}y${font} ${voffset -38}${font Trebuchet MS:size=26}${execi 600 conkyForecast --location=HRXX0006 --datatype=HT}${font}
${voffset 0}Humidity: ${alignr}${execi 600 conkyForecast --location=HRXX0006 --datatype=HM}
${voffset 0}Moon Phase: ${alignr}${execi 600 conkyForecast --location=HRXX006 --datatype=MP}
${voffset 0}${font}Wind Speed: ${alignr}${execi 600 conkyForecast --location=HRXXX006 --datatype=WS}
${endif}${else}${if_existing /proc/net/route eth1}
${voffset -8}${alignr 56}${font ConkyWeather:style=Bold:size=40}${execi 600 conkyForecast --location=HRXX0006 --datatype=WF}${font}
${voffset -52}${font Weather:size=40}y${font} ${voffset -38}${font Trebuchet MS:size=26}${execi 600 conkyForecast --location=HRXX0006 --datatype=HT}${font}
${voffset 0}Humidity: ${alignr}${execi 600 conkyForecast --location=HRXX0006 --datatype=HM}
${voffset 0}Moon Phase: ${alignr}${execi 600 conkyForecast --location=HRXX0006 --datatype=MP}
${voffset 0}${font}Wind Speed: ${alignr}${execi 600 conkyForecast --location=HRXX0006 --datatype=WS}
${endif}${else}
${font PizzaDude Bullets:size=14}4${font} Weather Unavailable
${endif}
Re: Conky
Postano: 17 ožu 2010, 15:16
Postao/la domi
Re: Conky
Postano: 17 ožu 2010, 16:29
Postao/la Suko
Instaliraj gcolor pa ćeš uvijek imati šifre.
Re: Conky
Postano: 17 ožu 2010, 23:15
Postao/la domi
Suko je napisao/la:Instaliraj gcolor pa ćeš uvijek imati šifre.
Re: Conky
Postano: 17 ožu 2010, 23:21
Postao/la Suko
Jesi uspio riješiti vrijeme?
Ja još nisam nikad stavljao neke takve stvari na svoj Conky.
(Mislim, sa dodatnim skriptama)
Re: Conky
Postano: 17 ožu 2010, 23:38
Postao/la domi
Suko je napisao/la:Jesi uspio riješiti vrijeme?
Ja još nisam nikad stavljao neke takve stvari na svoj Conky.
(Mislim, sa dodatnim skriptama)
Ma nisam Suko imam neke upute al i mi nisu baš jasne,
a razlog je navjerojatnije što je meni conky na drugom mjestu
nego što ojašnjava ovaj link
http://maketecheasier.com/how-to-create ... 2008/10/30
Meni je conky u file sistem etc/conky/ged.conky
pa mi uopće nije jasno što moram raditi onda radije ne diram
inače ged.datoteku otvaram sa gksu nautilus da bi mogao mjenjati postavke
Nisam siguran ni da je to ispravno
Re: Conky
Postano: 12 svi 2010, 21:17
Postao/la csx
kad kliknem na "Show Desktop Button" conky mi jednostavno nestane.. zna možda tko kako da to sredim? : /
Re: Conky
Postano: 13 svi 2010, 09:08
Postao/la ziko
e sad da se ubijem nemogu nac stranicu na kojoj bi to pisalo...
iako znam di se u config-fajlu to rjesava nisam tocno siguran koja je linija...
aj postaj ovdje svoj conf fajl od conky-ja
EDIT:
evo nasao sam jedan moj stari conkyrc na kompu...
pretpostavljam da koristis gnome, i nautilus za prikaz desktop-a...
potrazi ove linije i provjeri jesu li iste kao i dole, pogotovo ovaj dio own_window= yes i own_window_hints= sticky
Kod: Označi sve
# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_transparent yes
own_window_type desktop
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
Re: Conky
Postano: 13 svi 2010, 11:55
Postao/la csx
ovo je rješenje problema
hvala puno!
Re: Conky
Postano: 13 svi 2010, 23:58
Postao/la csx
hmm.. sad se je pojavio novi problem... sad kad kliknem na neku ikonu mi nestane conky...
config:
Kod: Označi sve
background yes
use_xft yes
xftfont HandelGotD:size=9
xftalpha 0.5
update_interval 4.0
total_run_times 0
own_window yes
own_window_type desktop
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 200 5
maximum_width 220
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
default_color white
default_shade_color red
default_outline_color green
alignment top_right
gap_x 12
gap_y 48
no_buffers yes
uppercase no
cpu_avg_samples 2
override_utf8_locale no
color2 white
TEXT
$sysname $kernel on $machine
Uptime $alignr $uptime
Load $alignr $loadavg
Hostname $alignr $nodename
wlan0 $alignr ${addr wlan0}
Inbound $alignr ${downspeed wlan0} kb/s
${downspeedgraph wlan0}
Outbound $alignr ${upspeed wlan0} kb/s
${upspeedgraph wlan0}
$processes processes ($running_processes running)
CPU $alignr ${cpu cpu0}% ${cpu cpu1}% ${cpu cpu2}%
${cpubar cpu0}
${cpubar cpu1}
${cpubar cpu2}
MEM $alignc $mem / $memmax $alignr $memperc%
$membar
/ $alignc ${fs_used /} / ${fs_size /} $alignr ${fs_free_perc /}%
${fs_bar /}
/home $alignc ${fs_used /home} / ${fs_size /home} $alignr ${fs_free_perc /home}%
${fs_bar /home}
swap $alignc $swap / $swapmax $alignr $swapperc%
${swapbar}
NAME $alignr PID CPU
${top name 1} $alignr ${top pid 1} ${top cpu 1}
${top name 2} $alignr ${top pid 2} ${top cpu 2}
${top name 3} $alignr ${top pid 3} ${top cpu 3}
${top name 4} $alignr ${top pid 4} ${top cpu 4}
${top name 5} $alignr ${top pid 5} ${top cpu 5}
${top name 6} $alignr ${top pid 6} ${top cpu 6}
${top name 7} $alignr ${top pid 7} ${top cpu 7}
${top name 8} $alignr ${top pid 8} ${top cpu 8}
${alignc 46}${color2}${font Arial Black:size=30}${time %H:%M}${font}${color}
${alignc}${time %d %B %Y}
