Fedora 12 - sami problemi
Moderator/ica: Moderatori/ce
- kova-ng
- Postovi: 1225
- Pridružen/a: 22 lip 2009, 23:04
- Spol: M
- OS: Archlinux
- Lokacija: Katoličke Čaire
Re: Fedora 12 - sami problemi
jucer sam instalirao fedoru 12 i jako mi se svidila, samo nisu radili driveri za grafičku.
tražio sam po netu neki tutorial i našao sam na ovoj stranici
http://mariuszczyz.wordpress.com/2009/1 ... tallation/
i nakon restarta, blank ekran, samo kursor od konzole
any help?
tražio sam po netu neki tutorial i našao sam na ovoj stranici
http://mariuszczyz.wordpress.com/2009/1 ... tallation/
i nakon restarta, blank ekran, samo kursor od konzole
any help?
People say nothing is impossible. But I do nothing every day.
Re: Fedora 12 - sami problemi
nakon instalacije predlažem OBAVEZNO napraviti iz konzole:kova-ng je napisao/la:jucer sam instalirao fedoru 12 i jako mi se svidila, samo nisu radili driveri za grafičku.
tražio sam po netu neki tutorial i našao sam na ovoj stranici
http://mariuszczyz.wordpress.com/2009/1 ... tallation/
i nakon restarta, blank ekran, samo kursor od konzole
any help?
preporučam spojini "na žicu" kako nebi bilo problema sa wirelessom koji u tom trenutku još nije podešen
Kod: Označi sve
yum update- kova-ng
- Postovi: 1225
- Pridružen/a: 22 lip 2009, 23:04
- Spol: M
- OS: Archlinux
- Lokacija: Katoličke Čaire
Re: Fedora 12 - sami problemi
nista, opet isto
update je bila prva stvar koju sam napravio nakon instalacije fedore
update je bila prva stvar koju sam napravio nakon instalacije fedore
People say nothing is impossible. But I do nothing every day.
- 4ndY
- Moderator
- Postovi: 4060
- Pridružen/a: 15 svi 2008, 18:05
- Spol: M
- OS: Fedora/KDE
- Lokacija: Hamburg, DE
- Kontakt:
Re: Fedora 12 - sami problemi
Ako za početak hoćeš vratiti na staro stanje:
* obriši xorg.conf ako je napravljen u /etc/X11/
* uninstaliraj ove vlasničke drivere: yum remove kmod-nvidia*
Ostalo ti objasnim na pivi
* obriši xorg.conf ako je napravljen u /etc/X11/
* uninstaliraj ove vlasničke drivere: yum remove kmod-nvidia*
Ostalo ti objasnim na pivi
A neutron walks into a bar; he asks the bartender, 'How much for a beer?' The bartender looks at him, and says 'For you, no charge.'
- kova-ng
- Postovi: 1225
- Pridružen/a: 22 lip 2009, 23:04
- Spol: M
- OS: Archlinux
- Lokacija: Katoličke Čaire
Re: Fedora 12 - sami problemi
Kod: Označi sve
[marijan@fedora ~]$ lspci
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
02:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 SE] (rev a1)
People say nothing is impossible. But I do nothing every day.
- 4ndY
- Moderator
- Postovi: 4060
- Pridružen/a: 15 svi 2008, 18:05
- Spol: M
- OS: Fedora/KDE
- Lokacija: Hamburg, DE
- Kontakt:
Re: Fedora 12 - sami problemi
Googlao sam malo, čini mi se da bi trebao blacklistat nouveau:
su -c 'echo "blacklist nouveau" >> /etc/modprobe.d/blacklist.conf'
I onda instalirat kmod-nvidia, te rebootat. Ako ti neće raditi (baci te u terminal), dobro bi bilo da snimiš "ispis" grešaka (sve ti se nalazi u /var/log/ direktoriju, osim xorg.conf):
* Xorg.0.log
* dmesg
* boot.log
* messages
* /etc/X11/xorg.conf
Znači te datoteke presnimiš u svoj direktorij:
Pa se onda opet vrati u grafičko sučelje da to "prostudiramo" (moraš maknut zadnju liniju iz /etc/modprobe.d/blacklist.conf uz ono što sam ti prije napisao).
su -c 'echo "blacklist nouveau" >> /etc/modprobe.d/blacklist.conf'
I onda instalirat kmod-nvidia, te rebootat. Ako ti neće raditi (baci te u terminal), dobro bi bilo da snimiš "ispis" grešaka (sve ti se nalazi u /var/log/ direktoriju, osim xorg.conf):
* Xorg.0.log
* dmesg
* boot.log
* messages
* /etc/X11/xorg.conf
Znači te datoteke presnimiš u svoj direktorij:
Kod: Označi sve
cp Xorg.0.log dmesg boot.log messages /etc/X11/xorg.conf ~A neutron walks into a bar; he asks the bartender, 'How much for a beer?' The bartender looks at him, and says 'For you, no charge.'
- kova-ng
- Postovi: 1225
- Pridružen/a: 22 lip 2009, 23:04
- Spol: M
- OS: Archlinux
- Lokacija: Katoličke Čaire
Re: Fedora 12 - sami problemi
boot.log
dmesg
Xorg.0.log
xorg.conf
Kod: Označi sve
[marijan@fedora ~]$ cat boot.log
Welcome to Fedora
Press 'I' to enter interactive startup.
Starting udev: [ OK ]
Setting hostname fedora: [ OK ]
Setting up Logical Volume Management: [ OK ]
Checking filesystems
Fedora-12-i686-L: clean, 139648/1359872 files, 961568/5423937 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
Entering non-interactive startup
Enabling ondemand cpu frequency scaling: [ OK ]
ip6tables: Applying firewall rules: [ OK ]
iptables: Applying firewall rules: [ OK ]
Checking for module nvidia.ko: [ OK ]
Enabling the nvidia driver: Driver already enabled.
[ OK ]
Starting portreserve: [ OK ]
Starting system logger: [ OK ]
Starting irqbalance: [ OK ]
Starting system message bus: [ OK ]
Starting Avahi daemon... [ OK ]
Starting cups: [ OK ]
Starting HAL daemon: [ OK ]
Setting network parameters... [ OK ]
Starting NetworkManager daemon: [ OK ]
Enabling Bluetooth devices:
Starting sendmail: [ OK ]
Starting sm-client: [ OK ]
Starting abrt daemon: [ OK ]
Starting crond: [ OK ]
Starting atd: [ OK ]
Kod: Označi sve
[marijan@fedora ~]$ cat dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31.6-166.fc12.i686 (mockbuild@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 SMP Wed Dec 9 11:14:59 EST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000005ffb0000 (usable)
BIOS-e820: 000000005ffb0000 - 000000005ffc0000 (ACPI data)
BIOS-e820: 000000005ffc0000 - 000000005fff0000 (ACPI NVS)
BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x5ffb0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 base 0040000000 mask FFE0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 01000000
init_memory_mapping: 0000000000000000-00000000373fe000
Using x86 segment limits to approximate NX protection
0000000000 - 0000400000 page 4k
0000400000 - 0037000000 page 2M
0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ 10000-16000
RAMDISK: 3757f000 - 37fef5ae
Allocated new RAMDISK: 00ac8000 - 015385ae
Move RAMDISK from 000000003757f000 - 0000000037fef5ad to 00ac8000 - 015385ad
ACPI: RSDP 000fa870 00014 (v00 ACPIAM)
ACPI: RSDT 5ffb0000 00038 (v01 A_M_I OEMRSDT 06000712 MSFT 00000097)
ACPI: FACP 5ffb0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097)
ACPI: DSDT 5ffb0440 04C5F (v01 ALV6V ALV6V151 00000151 INTL 20051117)
ACPI: FACS 5ffc0000 00040
ACPI: APIC 5ffb0390 00070 (v01 A_M_I OEMAPIC 06000712 MSFT 00000097)
ACPI: MCFG 5ffb0400 0003C (v01 A_M_I OEMMCFG 06000712 MSFT 00000097)
ACPI: OEMB 5ffc0040 00060 (v01 A_M_I AMI_OEM 06000712 MSFT 00000097)
ACPI: SSDT 5ffb50a0 000D3 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
651MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
node 0 low ram: 00000000 - 373fe000
node 0 bootmap 00013000 - 00019e80
(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000400000 - 0000ac2a10] TEXT DATA BSS ==> [0000400000 - 0000ac2a10]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0000ac3000 - 0000ac712b] BRK ==> [0000ac3000 - 0000ac712b]
#6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
#7 [0000ac8000 - 00015385ae] NEW RAMDISK ==> [0000ac8000 - 00015385ae]
#8 [0000013000 - 000001a000] BOOTMAP ==> [0000013000 - 000001a000]
found SMP MP-table at [c00ff780] ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x0005ffb0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0005ffb0
On node 0 totalpages: 393023
free_area_init_node: node 0, pgdat c0978380, node_mem_map c1539200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 220470 pages, LIFO batch:31
HighMem zone: 1304 pages used for memmap
HighMem zone: 165530 pages, LIFO batch:31
Using APIC driver default
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages at c2140000, static data 34428 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 389951
Kernel command line: ro root=UUID=e0c73965-6ecc-4577-9fa7-ab3e75443af9 noiswmd LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=croat rhgb quiet
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 7862400 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000373fe:0005ffb0)
Memory: 1532572k/1572544k available (3496k kernel code, 38564k reserved, 2169k data, 432k init, 667336k highmem)
virtual kernel memory layout:
fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc0989000 - 0xc09f5000 ( 432 kB)
.data : 0xc076a12b - 0xc09885a8 (2169 kB)
.text : 0xc0400000 - 0xc076a12b (3496 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Fast TSC calibration using PIT
Detected 2301.765 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 4603.53 BogoMIPS (lpj=2301765)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 128K (64 bytes/line)
mce: CPU supports 5 MCE banks
using C1E aware idle routine
Performance Counters: AMD PMU driver.
... version: 0
... bit width: 48
... generic counters: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose counters: 0
... counter mask: 000000000000000f
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20090521
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20208 entries in 40 pages
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Sempron(tm) Processor 3200+ stepping 02
Brought up 1 CPUs
Total of 1 processors activated (4603.53 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=352 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=500 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=192 bytes
sizeof(task_struct)=3256 bytes
CPU0 attaching NULL sched-domain.
Booting paravirtualized kernel on bare hardware
regulator: core version 0.5
Time: 9:36:47 Date: 12/13/09
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI Warning: Incorrect checksum in table [OEMB] - 09, should be DA 20090521 tbutils-246
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.1: reg 10 io port: [0xec00-0xec3f]
pci 0000:00:01.1: reg 20 io port: [0x5000-0x503f]
pci 0000:00:01.1: reg 24 io port: [0x6000-0x603f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xddeff000-0xddefffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xddefec00-0xddefecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:05.0: reg 10 32bit mmio: [0xddef8000-0xddefbfff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:07.0: reg 10 32bit mmio: [0xddefd000-0xddefdfff]
pci 0000:00:07.0: reg 14 io port: [0xe480-0xe487]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: reg 10 io port: [0xe00-0xe07]
pci 0000:00:08.0: reg 14 io port: [0xe20-0xe23]
pci 0000:00:08.0: reg 18 io port: [0xe40-0xe47]
pci 0000:00:08.0: reg 1c io port: [0xe60-0xe63]
pci 0000:00:08.0: reg 20 io port: [0xd880-0xd88f]
pci 0000:00:08.0: reg 24 32bit mmio: [0xddefc000-0xddefcfff]
pci 0000:00:08.1: reg 10 io port: [0xe80-0xe87]
pci 0000:00:08.1: reg 14 io port: [0xea0-0xea3]
pci 0000:00:08.1: reg 18 io port: [0xec0-0xec7]
pci 0000:00:08.1: reg 1c io port: [0xee0-0xee3]
pci 0000:00:08.1: reg 20 io port: [0xd000-0xd00f]
pci 0000:00:08.1: reg 24 32bit mmio: [0xddef7000-0xddef7fff]
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:04.0: transparent bridge
pci 0000:02:00.0: reg 10 32bit mmio: [0xdf000000-0xdfffffff]
pci 0000:02:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
pci 0000:02:00.0: reg 1c 64bit mmio: [0xde000000-0xdeffffff]
pci 0000:02:00.0: reg 30 32bit mmio: [0xddfe0000-0xddffffff]
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:09.0: bridge 32bit mmio: [0xddf00000-0xdfffffff]
pci 0000:00:09.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x800-0x80f has been reserved
system 00:09: ioport range 0x4000-0x407f has been reserved
system 00:09: ioport range 0x4080-0x40ff has been reserved
system 00:09: ioport range 0x4400-0x447f has been reserved
system 00:09: ioport range 0x4480-0x44ff has been reserved
system 00:09: ioport range 0x4800-0x487f has been reserved
system 00:09: ioport range 0x4880-0x48ff has been reserved
system 00:09: ioport range 0x2000-0x207f has been reserved
system 00:09: ioport range 0x2080-0x20ff has been reserved
system 00:09: iomem range 0xfefe0000-0xfefe01ff has been reserved
system 00:09: iomem range 0xfefe1000-0xfefe1fff has been reserved
system 00:09: iomem range 0xfee01000-0xfeefffff has been reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0d: ioport range 0x290-0x29f has been reserved
system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0f: iomem range 0x0-0x9ffff could not be reserved
system 00:0f: iomem range 0xc0000-0xcffff could not be reserved
system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
system 00:0f: iomem range 0x100000-0x5fffffff could not be reserved
system 00:0f: iomem range 0xff380000-0xffffffff has been reserved
pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
pci 0000:00:04.0: IO window: disabled
pci 0000:00:04.0: MEM window: disabled
pci 0000:00:04.0: PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
pci 0000:00:09.0: IO window: disabled
pci 0000:00:09.0: MEM window: 0xddf00000-0xdfffffff
pci 0000:00:09.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0b.0: IO window: disabled
pci 0000:00:0b.0: MEM window: disabled
pci 0000:00:0b.0: PREFETCH window: disabled
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0c.0: IO window: disabled
pci 0000:00:0c.0: MEM window: disabled
pci 0000:00:0c.0: PREFETCH window: disabled
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 1 mem: [0xddf00000-0xdfffffff]
pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xcfffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Switched to high resolution mode on CPU 0
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 10689k freed
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1260697007.393:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1712
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:02:00.0: Boot video device
pcieport-driver 0000:00:09.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:09.0: setting latency timer to 64
pcieport-driver 0000:00:0b.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:0b.0: setting latency timer to 64
pcieport-driver 0000:00:0c.0: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:0c.0: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
processor LNXCPU:00: registered as cooling_device0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 23, io mem 0xddefec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31.6-166.fc12.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xddeff000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31.6-166.fc12.i686 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
Magic number: 5:547:626
rtc_cmos 00:02: setting system clock to 2009-12-13 09:36:49 UTC (1260697009)
Initalizing network drop monitor service
Freeing unused kernel memory: 432k freed
Write protecting the kernel text: 3500k
Write protecting the kernel read-only data: 1692k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
dracut: dracut-002-13.4.git8f397a9b.fc12
udev: starting version 145
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
nouveau 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19
nouveau 0000:02:00.0: setting latency timer to 64
[drm] nouveau 0000:02:00.0: Detected an NV40 generation card (0x246300b1)
[drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PROM
[drm] nouveau 0000:02:00.0: ... appears to be valid
[drm] nouveau 0000:02:00.0: BIT BIOS found
[drm] nouveau 0000:02:00.0: Bios version 05.72.22.81
[drm] nouveau 0000:02:00.0: TMDS table script pointers not stubbed
[drm] nouveau 0000:02:00.0: BIT table 'd' not found
[drm] nouveau 0000:02:00.0: Found Display Configuration Block version 3.0
[drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x30 5 10 2
[drm] nouveau 0000:02:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff
[drm] nouveau 0000:02:00.0: 1: 0x00001130: type 0x30 idx 1 tag 0x07
[drm] nouveau 0000:02:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:02:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff
[drm] nouveau 0000:02:00.0: Raw DCB entry 0: 01000300 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01011312 00000000
[drm] nouveau 0000:02:00.0: Raw DCB entry 2: 02011310 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 3: 020223f1 00a0c030
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD2B2
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD5EA
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xDBAA
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xDD25
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xDF8B
[TTM] Zone kernel: Available graphics memory: 438658 kiB.
[TTM] Zone highmem: Available graphics memory: 772326 kiB.
[drm] nouveau 0000:02:00.0: 256 MiB VRAM
[drm] nouveau 0000:02:00.0: 64 MiB GART (aperture)
[drm] nouveau 0000:02:00.0: Allocating FIFO number 0
[drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 0
[drm] nouveau 0000:02:00.0: Initial CRTC_OWNER is 0
[drm] nouveau 0000:02:00.0: Enable TV-Out with tv module option
[drm] nouveau 0000:02:00.0: Detected a VGA connector
[drm] nouveau 0000:02:00.0: Detected a DVI-I connector
[drm] nouveau 0000:02:00.0: Saving VGA fonts
[drm] nouveau 0000:02:00.0: allocated 1440x900 fb: 0x49000, bo f6606100
fbcon: nouveaufb (fb0) is primary device
[drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:02:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga encoder (output 2)
[drm] nouveau 0000:02:00.0: Setting dpms mode 3 on CRTC 0
[drm] nouveau 0000:02:00.0: vpll: n 51 m 13 log2p 0
[drm] DAC-7: set mode 1440x900 27
[drm] nouveau 0000:02:00.0: nv04_dac_mode_set called for encoder 0
[drm] nouveau 0000:02:00.0: Setting dpms mode 0 on CRTC 0
[drm] nouveau 0000:02:00.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:02:00.0: Output VGA-1 is running on CRTC 0 using output A
[drm] nouveau 0000:02:00.0: Setting dpms mode 3 on CRTC 1
Console: switching to colour frame buffer device 180x56
fb0: nouveaufb frame buffer device
registered panic notifier
[drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on minor 0
dracut: Starting plymouth daemon
usb 2-3: new full speed USB device using ohci_hcd and address 2
dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
pata_acpi 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
pata_acpi 0000:00:08.0: setting latency timer to 64
pata_acpi 0000:00:08.0: PCI INT A disabled
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
pata_acpi 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
pata_acpi 0000:00:08.1: setting latency timer to 64
pata_acpi 0000:00:08.1: PCI INT B disabled
sata_nv 0000:00:08.0: version 3.5
sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xe00 ctl 0xe20 bmdma 0xd880 irq 21
ata4: SATA max UDMA/133 cmd 0xe40 ctl 0xe60 bmdma 0xd888 irq 21
sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
sata_nv 0000:00:08.1: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0xe80 ctl 0xea0 bmdma 0xd000 irq 20
ata6: SATA max UDMA/133 cmd 0xec0 ctl 0xee0 bmdma 0xd008 irq 20
usb 2-3: New USB device found, idVendor=195d, idProduct=1010
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Gaming Mouse1600
usb 2-3: Manufacturer: Gaming Mouse1600
usb 2-3: configuration #1 chosen from 1 choice
input: Gaming Mouse1600 Gaming Mouse1600 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input4
generic-usb 0003:195D:1010.0001: input,hidraw0: USB HID v1.10 Mouse [Gaming Mouse1600 Gaming Mouse1600] on usb-0000:00:02.0-3/input0
ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-H44N, RB01, max UDMA/66
ata1: nv_mode_filter: 0x1f39f&0x739f->0x739f, BIOS=0x7000 (0xc00000) ACPI=0x701f (900:60:0x14)
ata1.01: configured for UDMA/33
scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-H44N RB01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sr 0:0:1:0: Attached scsi generic sg0 type 5
ata2: port disabled. ignoring.
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: Hitachi HDS721612PLA380, P23OABEA, max UDMA/133
ata4.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA Hitachi HDS72161 P23O PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 >
sd 3:0:0:0: [sda] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda1): barriers enabled
kjournald2 starting: pid 205, dev sda1:8, commit interval 5 seconds
EXT4-fs (sda1): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda1): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/sda1
dracut: Loading SELinux policy
type=1404 audit(1260697012.322:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 142643 rules.
SELinux: 8192 avtab hash slots, 142643 rules.
SELinux: 8 users, 12 roles, 2972 types, 139 bools, 1 sens, 1024 cats
SELinux: 75 classes, 142643 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda1, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1260697012.594:3): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
udev: starting version 145
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
forcedeth 0000:00:07.0: setting latency timer to 64
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:66:2f:34:db
forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
i2c-adapter i2c-2: nForce2 SMBus adapter at 0x5000
i2c-adapter i2c-3: nForce2 SMBus adapter at 0x6000
ppdev: user-space parallel port driver
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:05.0: setting latency timer to 64
hda_codec: Unknown model for ALC888, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3862: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:3866: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3870: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3871: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3874: dig-out=0x1e/0x0
ALSA sound/pci/hda/hda_codec.c:3882: inputs: mic=0x18, fmic=0x0, line=0x1a, fline=0x0, cd=0x1c, aux=0x0
ALSA sound/pci/hda/patch_realtek.c:1197: realtek: Enabling init ASM_ID=0x1e01 CODEC_ID=10ec0888
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
device-mapper: multipath: version 1.1.0 loaded
EXT4-fs (sda1): internal journal on sda1:8
fuse init (API version 7.12)
SELinux: initialized (dev sda2, type fuseblk), uses genfs_contexts
Adding 3903752k swap on /dev/sda5. Priority:-1 extents:1 across:3903752k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
Kod: Označi sve
[marijan@fedora ~]$ cat Xorg.0.log
X.Org X Server 1.7.1
Release Date: 2009-10-23
X Protocol Version 11, Revision 0
Build Operating System: 2.6.18-164.2.1.el5
Current Operating System: Linux fedora 2.6.31.6-166.fc12.i686 #1 SMP Wed Dec 9 11:14:59 EST 2009 i686
Kernel command line: ro root=UUID=e0c73965-6ecc-4577-9fa7-ab3e75443af9 noiswmd LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=croat rhgb quiet
Build Date: 05 November 2009 07:43:20PM
Build ID: xorg-x11-server 1.7.1-7.fc12
Current version of pixman: 0.16.2
Before reporting problems, check http://bodhi.fedoraproject.org/
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 13 10:38:08 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "Videocard0"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(**) Option "AIGLX" "on"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules/extensions/nvidia,/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x821b0a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:2:0:0) 10de:01d3:1458:3470 nVidia Corporation G72 [GeForce 7300 SE] rev 161, Mem @ 0xdf000000/16777216, 0xc0000000/268435456, 0xde000000/16777216, BIOS @ 0x????????/131072
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/nvidia/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 190.42 Tue Oct 20 20:55:08 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
(EE) NVIDIA: system's kernel log for additional error messages.
(II) UnloadModule: "nvidia"
(II) Unloading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(EE) Failed to load module "nvidia" (module-specific error, 0)
(EE) No drivers available.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://bodhi.fedoraproject.org/
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Kod: Označi sve
[marijan@fedora ~]$ cat xorg.conf
# Xorg configuration created by livna-config-display
Section "Files"
ModulePath "/usr/lib/xorg/modules/extensions/nvidia"
ModulePath "/usr/lib/xorg/modules"
EndSection
Section "ServerFlags"
Option "AIGLX" "on"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
Option "AddARGBGLXVisuals" "True"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Zadnja izmjena: kova-ng, dana/u 13 pro 2009, 11:18, ukupno mijenjano 1 put.
People say nothing is impossible. But I do nothing every day.
- kova-ng
- Postovi: 1225
- Pridružen/a: 22 lip 2009, 23:04
- Spol: M
- OS: Archlinux
- Lokacija: Katoličke Čaire
Re: Fedora 12 - sami problemi
messages
Poruka sadrži 1224074 znakova.
Dopušteno je maksimalno 60000 znakova.

Poruka sadrži 1224074 znakova.
Dopušteno je maksimalno 60000 znakova.
People say nothing is impossible. But I do nothing every day.
- 4ndY
- Moderator
- Postovi: 4060
- Pridružen/a: 15 svi 2008, 18:05
- Spol: M
- OS: Fedora/KDE
- Lokacija: Hamburg, DE
- Kontakt:
Re: Fedora 12 - sami problemi
Iz nekog razloga nije moguće učitati kernel modul nvidia.
Možda da prvo probaš ručno:
ako ni to ne radi, prvo što mi pada na pamet je "kriva" verzija tog kmoda i tvog kernela, pa c/p ovdje:
i
Možda da prvo probaš ručno:
Kod: Označi sve
modprobe nvidiaKod: Označi sve
uname -rKod: Označi sve
rpm -qa | grep kmod-nvidiaA neutron walks into a bar; he asks the bartender, 'How much for a beer?' The bartender looks at him, and says 'For you, no charge.'