[MISC]Instalacija

[Heisenberg]

Probaj:

Kod: Označi sve

killall dhcpcd
dhcpcd eth0

i daj izlaz

evo sad cu, kad rebootam natrag u prijasnji os.

[Heisenberg]

lspci

Kod: Označi sve

matej@matej-Aspire-7551:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1)
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series]
02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Turks/Whistler HDMI Audio [Radeon HD 6000 Series]
03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
06:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01)

killall dhcpcd
dhcpcd eth0

Kod: Označi sve

matej@matej-Aspire-7551:~$ killall dhcpcd
dhcpcd: no process found
matej@matej-Aspire-7551:~$ dhcpcd eth0
The program 'dhcpcd' can be found in the following packages:
 * dhcpcd
 * dhcpcd5
Try: sudo apt-get install <selected package>

[retsam]

Ne treba mi u tvo os-u, već nakon što bootaš u arch

[Heisenberg]

Ne treba mi u tvo os-u, već nakon što bootaš u arch

al kako da copy-paste kad sam u arch bootu? nikad se s tim nisam susretao prije.

[retsam]

Možeš li prepisati(vidiš i sam da tekst nije dugačak) ili streamati u neku tekstualnu datoteku, n. p.

Kod: Označi sve

killall dhcpcd
dhcpcd > neki_tekst

i onda montiraj usb i kopiraj na njega iako ti je najlakše prepisati.

[Heisenberg]

root@archiso ~ #killall dhcpcd
root@archiso ~ #dhcpcd eth0
dhcpcd [ 428]: version 5.6.3 starting
dhcpcd [428]: eth0: interface not found or invalid

[retsam]

je si spojen s ethernet kabelom? Koje interface imaš, ajde pokreni i samo prepiši sučelja, dake eth0, eth1,...

Kod: Označi sve

ifconfig

[Slamd64]

Ovako mi kopiraj output iz live cd :
cat lspci > /media/sda/nekifile
cat ifconfig > /media/sda/nekifile2
Gdje naravno /media/sda/nekifile zamjenis s svojom particijom i das fajlu ime koje zelis onda iz prijasnjeg os-a otvori i zalijepi ovdje.

Gesendet von meinem Xperia Neo V mit Tapatalk 2

[Heisenberg]

Spojen sam s ethernet kabelom, a sada upravo pisem s obiteljskog racunala (dijelimo isti eth)

Kod: Označi sve

root@archiso ~ #ifconfig

lo:flags=73<UP.LOOPBACK,RUNNING> mtu 16436
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (local loopback)
RX packets 0 bytes 0 (0.0b)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0b)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 88:9f:fa:33:f3:af txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0b)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0b)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

[retsam]

sad daj lspci, kako je slamd rekao, mislim da ti neki modul nije učitan, pa da ti zato niti ne prepoznaje eth0 interface