Regionalni Linux forum
https://www.linuxzasve.com/forum/
Kod: Označi sve
dmesgKod: Označi sve
cat /var/log/messagesKod: Označi sve
sudo apt-add-repository ppa:alexmurray/indicator-sensors
sudo apt-get update
sudo apt-get install indicator-sensors
Kod: Označi sve
sudo add-apt-repository ppa:webupd8team/jupiter
sudo apt-get update
sudo apt-get install jupiter
Kod: Označi sve
[ 0.107647] pci 0000:01:00.1: >supports D1 D2
[ 0.107700] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[ 0.107707] pci 0000:00:01.0: > bridge window [io 0xa000-0xafff]
[ 0.107713] pci 0000:00:01.0: > bridge window [mem 0xff500000-0xff5fffff]
[ 0.107719] pci 0000:00:01.0: > bridge window [mem 0xb7f00000-0xf7efffff pref]
[ 0.107731] pci_bus 0000:00: >on NUMA node 0
[ 0.107739] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.108048] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.108158] pci0000:00: >Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.117143] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.117247] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.117335] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.117421] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.117507] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.117593] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.117680] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.117766] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.118015] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.118022] vgaarb: loaded
[ 0.118023] vgaarb: bridge control possible 0000:01:00.0
[ 0.118414] SCSI subsystem initialized
[ 0.118533] libata version 3.00 loaded.
[ 0.118591] ACPI: bus type usb registered
[ 0.118640] usbcore: registered new interface driver usbfs
[ 0.118665] usbcore: registered new interface driver hub
[ 0.118729] usbcore: registered new device driver usb
[ 0.118933] PCI: Using ACPI for IRQ routing
[ 0.118944] PCI: pci_cache_line_size set to 64 bytes
[ 0.119053] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.119057] e820: reserve RAM buffer [mem 0x3ffb0000-0x3fffffff]
[ 0.119265] NetLabel: Initializing
[ 0.119270] NetLabel: domain hash size = 128
[ 0.119272] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.119290] NetLabel: unlabeled traffic allowed by default
[ 0.133132] AppArmor: AppArmor Filesystem Enabled
[ 0.133201] pnp: PnP ACPI init
[ 0.133233] ACPI: bus type pnp registered
[ 0.133425] pnp 00:00: >[bus 00-ff]
[ 0.133431] pnp 00:00: >[io 0x0cf8-0x0cff]
[ 0.133436] pnp 00:00: >[io 0x0000-0x0cf7 window]
[ 0.133439] pnp 00:00: >[io 0x0d00-0xffff window]
[ 0.133444] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
[ 0.133447] pnp 00:00: >[mem 0x000c0000-0x000dffff window]
[ 0.133451] pnp 00:00: >[mem 0x40000000-0xffffffff window]
[ 0.133558] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.133607] pnp 00:01: >[dma 4]
[ 0.133611] pnp 00:01: >[io 0x0000-0x000f]
[ 0.133615] pnp 00:01: >[io 0x0081-0x0083]
[ 0.133618] pnp 00:01: >[io 0x0087]
[ 0.133621] pnp 00:01: >[io 0x0089-0x008b]
[ 0.133624] pnp 00:01: >[io 0x008f]
[ 0.133627] pnp 00:01: >[io 0x00c0-0x00df]
[ 0.133674] pnp 00:01: >Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.133697] pnp 00:02: >[io 0x0070-0x0071]
[ 0.133721] pnp 00:02: >[irq 8]
[ 0.133769] pnp 00:02: >Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.133788] pnp 00:03: >[io 0x0061]
[ 0.133839] pnp 00:03: >Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.133859] pnp 00:04: >[io 0x00f0-0x00ff]
[ 0.133871] pnp 00:04: >[irq 13]
[ 0.133919] pnp 00:04: >Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.134580] pnp 00:05: >[io 0x03f0-0x03f5]
[ 0.134584] pnp 00:05: >[io 0x03f7]
[ 0.134595] pnp 00:05: >[irq 6]
[ 0.134599] pnp 00:05: >[dma 2]
[ 0.134713] pnp 00:05: >Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.135176] pnp 00:06: >[io 0x0378-0x037f]
[ 0.135180] pnp 00:06: >[io 0x0778-0x077b]
[ 0.135191] pnp 00:06: >[irq 7]
[ 0.135196] pnp 00:06: >[dma 3]
[ 0.135450] pnp 00:06: >Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.135967] pnp 00:07: >[io 0x0010-0x001f]
[ 0.135972] pnp 00:07: >[io 0x0022-0x003f]
[ 0.135975] pnp 00:07: >[io 0x0044-0x005f]
[ 0.135978] pnp 00:07: >[io 0x0062-0x0063]
[ 0.135981] pnp 00:07: >[io 0x0065-0x006f]
[ 0.135984] pnp 00:07: >[io 0x0072-0x007f]
[ 0.135986] pnp 00:07: >[io 0x0080]
[ 0.136021] pnp 00:07: >[io 0x0084-0x0086]
[ 0.136025] pnp 00:07: >[io 0x0088]
[ 0.136028] pnp 00:07: >[io 0x008c-0x008e]
[ 0.136031] pnp 00:07: >[io 0x0090-0x009f]
[ 0.136034] pnp 00:07: >[io 0x00a2-0x00bf]
[ 0.136037] pnp 00:07: >[io 0x00e0-0x00ef]
[ 0.136040] pnp 00:07: >[io 0x0295-0x0296]
[ 0.136043] pnp 00:07: >[io 0x03e0-0x03e7]
[ 0.136047] pnp 00:07: >[mem 0xfff80000-0xffffffff]
[ 0.136050] pnp 00:07: >[io 0x04d0-0x04d1]
[ 0.136053] pnp 00:07: >[io 0x0800-0x087f]
[ 0.136056] pnp 00:07: >[io 0x0400-0x041f]
[ 0.136060] pnp 00:07: >[io 0x0000-0xffffffffffffffff disabled]
[ 0.136210] system 00:07: >[io 0x0295-0x0296] has been reserved
[ 0.136216] system 00:07: >[io 0x03e0-0x03e7] has been reserved
[ 0.136220] system 00:07: >[io 0x04d0-0x04d1] has been reserved
[ 0.136224] system 00:07: >[io 0x0800-0x087f] has been reserved
[ 0.136227] system 00:07: >[io 0x0400-0x041f] has been reserved
[ 0.136233] system 00:07: >[mem 0xfff80000-0xffffffff] has been reserved
[ 0.136242] system 00:07: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.136353] pnp 00:08: >[mem 0xfec00000-0xfec00fff]
[ 0.136358] pnp 00:08: >[mem 0xfee00000-0xfee00fff]
[ 0.136462] system 00:08: >[mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.136468] system 00:08: >[mem 0xfee00000-0xfee00fff] has been reserved
[ 0.136475] system 00:08: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.136939] pnp 00:09: >[io 0x03f8-0x03ff]
[ 0.136959] pnp 00:09: >[irq 4]
[ 0.136963] pnp 00:09: >[dma 0 disabled]
[ 0.137120] pnp 00:09: >Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.137364] pnp 00:0a: >[mem 0x00000000-0x0009ffff]
[ 0.137370] pnp 00:0a: >[mem 0x00000000-0xffffffffffffffff disabled]
[ 0.137373] pnp 00:0a: >[mem 0x000e0000-0x000fffff]
[ 0.137377] pnp 00:0a: >[mem 0x00100000-0x3fffffff]
[ 0.137380] pnp 00:0a: >[mem 0x00000000-0xffffffffffffffff disabled]
[ 0.137504] system 00:0a: >[mem 0x00000000-0x0009ffff] could not be reserved
[ 0.137511] system 00:0a: >[mem 0x000e0000-0x000fffff] could not be reserved
[ 0.137515] system 00:0a: >[mem 0x00100000-0x3fffffff] could not be reserved
[ 0.137522] system 00:0a: >Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.137780] pnp: PnP ACPI: found 11 devices
[ 0.137785] ACPI: ACPI bus type pnp unregistered
[ 0.137792] PnPBIOS: Disabled by ACPI PNP
[ 0.175719] Switching to clocksource acpi_pm
[ 0.175810] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[ 0.175820] pci 0000:00:01.0: > bridge window [io 0xa000-0xafff]
[ 0.175828] pci 0000:00:01.0: > bridge window [mem 0xff500000-0xff5fffff]
[ 0.175834] pci 0000:00:01.0: > bridge window [mem 0xb7f00000-0xf7efffff pref]
[ 0.175861] pci 0000:00:01.0: >setting latency timer to 64
[ 0.175869] pci_bus 0000:00: >resource 4 [io 0x0000-0xffff]
[ 0.175873] pci_bus 0000:00: >resource 5 [mem 0x00000000-0xfffffffff]
[ 0.175877] pci_bus 0000:01: >resource 0 [io 0xa000-0xafff]
[ 0.175883] pci_bus 0000:01: >resource 1 [mem 0xff500000-0xff5fffff]
[ 0.175887] pci_bus 0000:01: >resource 2 [mem 0xb7f00000-0xf7efffff pref]
[ 0.175966] NET: Registered protocol family 2
[ 0.175966] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.175966] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.175966] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.175966] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.175966] TCP: reno registered
[ 0.175966] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.175966] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.175966] NET: Registered protocol family 1
[ 0.175966] pci 0000:00:01.0: >disabling DAC on VIA PCI bridge
[ 0.176048] pci 0000:00:11.0: >Bypassing VIA 8237 APIC De-Assert Message
[ 0.176068] pci 0000:01:00.0: >Boot video device
[ 0.176076] PCI: CLS 32 bytes, default 64
[ 0.176852] audit: initializing netlink socket (disabled)
[ 0.176879] type=2000 audit(1373642271.172:1): initialized
[ 0.208349] Trying to unpack rootfs image as initramfs...
[ 0.244927] highmem bounce pool size: 64 pages
[ 0.244949] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.256476] VFS: Disk quotas dquot_6.5.2
[ 0.256586] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.257671] fuse init (API version 7.19)
[ 0.257859] msgmni has been set to 1711
[ 0.272251] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.272366] io scheduler noop registered
[ 0.272370] io scheduler deadline registered (default)
[ 0.272401] io scheduler cfq registered
[ 0.272657] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.272697] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.272964] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.272975] ACPI: Power Button [PWRB]
[ 0.273048] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.273054] ACPI: Power Button [PWRF]
[ 0.278976] GHES: HEST is not enabled!
[ 0.284352] isapnp: Scanning for PnP cards...
[ 0.290132] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.310574] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.397709] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.464259] Linux agpgart interface v0.103
[ 0.464402] agpgart: Detected VIA VT3314 chipset
[ 0.472696] agpgart-via 0000:00:00.0: >AGP aperture is 64M @ 0xf8000000
[ 0.480954] brd: module loaded
[ 0.482439] loop: module loaded
[ 0.483386] Fixed MDIO Bus: probed
[ 0.483470] tun: Universal TUN/TAP device driver, 1.6
[ 0.483473] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.483592] PPP generic driver version 2.4.2
[ 0.483693] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.483791] ehci_hcd 0000:00:10.4: >EHCI Host Controller
[ 0.483804] ehci_hcd 0000:00:10.4: >new USB bus registered, assigned bus number 1
[ 0.483900] ehci_hcd 0000:00:10.4: >irq 21, io mem 0xff6ff800
[ 0.492271] ehci_hcd 0000:00:10.4: >USB 2.0 started, EHCI 1.00
[ 0.492357] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[ 0.492362] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.492366] usb usb1: >Product: EHCI Host Controller
[ 0.492369] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[ 0.492372] usb usb1: >SerialNumber: 0000:00:10.4
[ 0.492662] hub 1-0:1.0: >USB hub found
[ 0.492674] hub 1-0:1.0: >8 ports detected
[ 0.492827] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.492877] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.492947] uhci_hcd 0000:00:10.0: >UHCI Host Controller
[ 0.492958] uhci_hcd 0000:00:10.0: >new USB bus registered, assigned bus number 2
[ 0.492997] uhci_hcd 0000:00:10.0: >irq 21, io base 0x0000c000
[ 0.493062] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.493067] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.493071] usb usb2: >Product: UHCI Host Controller
[ 0.493074] usb usb2: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[ 0.493077] usb usb2: >SerialNumber: 0000:00:10.0
[ 0.493306] hub 2-0:1.0: >USB hub found
[ 0.493316] hub 2-0:1.0: >2 ports detected
[ 0.493448] uhci_hcd 0000:00:10.1: >UHCI Host Controller
[ 0.493460] uhci_hcd 0000:00:10.1: >new USB bus registered, assigned bus number 3
[ 0.493497] uhci_hcd 0000:00:10.1: >irq 21, io base 0x0000c400
[ 0.493563] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.493567] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.493573] usb usb3: >Product: UHCI Host Controller
[ 0.493576] usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[ 0.493579] usb usb3: >SerialNumber: 0000:00:10.1
[ 0.493788] hub 3-0:1.0: >USB hub found
[ 0.493798] hub 3-0:1.0: >2 ports detected
[ 0.493921] uhci_hcd 0000:00:10.2: >UHCI Host Controller
[ 0.493933] uhci_hcd 0000:00:10.2: >new USB bus registered, assigned bus number 4
[ 0.494026] uhci_hcd 0000:00:10.2: >irq 21, io base 0x0000c800
[ 0.494083] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.494088] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.494091] usb usb4: >Product: UHCI Host Controller
[ 0.494094] usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[ 0.494097] usb usb4: >SerialNumber: 0000:00:10.2
[ 0.494308] hub 4-0:1.0: >USB hub found
[ 0.494318] hub 4-0:1.0: >2 ports detected
[ 0.494438] uhci_hcd 0000:00:10.3: >UHCI Host Controller
[ 0.494449] uhci_hcd 0000:00:10.3: >new USB bus registered, assigned bus number 5
[ 0.494485] uhci_hcd 0000:00:10.3: >irq 21, io base 0x0000cc00
[ 0.494543] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.494547] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.494551] usb usb5: >Product: UHCI Host Controller
[ 0.494554] usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[ 0.494557] usb usb5: >SerialNumber: 0000:00:10.3
[ 0.494771] hub 5-0:1.0: >USB hub found
[ 0.494782] hub 5-0:1.0: >2 ports detected
[ 0.495009] usbcore: registered new interface driver libusual
[ 0.495082] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.500252] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.500280] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.500575] mousedev: PS/2 mouse device common for all mice
[ 0.500867] rtc_cmos 00:02: >RTC can wake from S4
[ 0.501129] rtc_cmos 00:02: >rtc core: registered rtc_cmos as rtc0
[ 0.501197] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 0.501315] device-mapper: uevent: version 1.0.3
[ 0.501457] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.501556] EISA: Probing bus 0 at eisa.0
[ 0.501613] EISA: Detected 0 cards.
[ 0.501628] cpuidle: using governor ladder
[ 0.501630] cpuidle: using governor menu
[ 0.501633] EFI Variables Facility v0.08 2004-May-17
[ 0.502072] ashmem: initialized
[ 0.502303] TCP: cubic registered
[ 0.502482] NET: Registered protocol family 10
[ 0.502829] NET: Registered protocol family 17
[ 0.502861] Key type dns_resolver registered
[ 0.502987] Using IPI No-Shortcut mode
[ 0.503253] PM: Hibernation image not present or could not be loaded.
[ 0.503279] registered taskstats version 1
[ 0.895694] isapnp: No Plug & Play device found
[ 0.948191] usb 1-2: >new high-speed USB device number 3 using ehci_hcd
[ 1.084247] usb 1-2: >New USB device found, idVendor=0c45, idProduct=627b
[ 1.084256] usb 1-2: >New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.084260] usb 1-2: >Product: USB20 Camera
[ 1.146677] Freeing initrd memory: 14724k freed
[ 1.183215] Key type trusted registered
[ 1.189002] Key type encrypted registered
[ 1.195076] Magic number: 5:218:285
[ 1.195185] acpi PNP0C04:00: >hash matches
[ 1.195261] rtc_cmos 00:02: >setting system clock to 2013-07-12 15:17:52 UTC (1373642272)
[ 1.195431] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.195435] EDD information not available.
[ 1.195703] Freeing unused kernel memory: 756k freed
[ 1.197237] Write protecting the kernel text: 5960k
[ 1.197264] Write protecting the kernel read-only data: 2424k
[ 1.197266] NX-protecting the kernel data: 4280k
[ 1.199171] usb 1-3: >new high-speed USB device number 4 using ehci_hcd
[ 1.208130] Refined TSC clocksource calibration: 2666.580 MHz.
[ 1.208144] Switching to clocksource tsc
[ 1.252934] udevd[84]: starting version 175
[ 1.329363] usb 1-3: >New USB device found, idVendor=1058, idProduct=0704
[ 1.329372] usb 1-3: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.329377] usb 1-3: >Product: External HDD
[ 1.329381] usb 1-3: >Manufacturer: Western Digital
[ 1.329384] usb 1-3: >SerialNumber: 57442D575845583038465841323632
[ 1.339757] Initializing USB Mass Storage driver...
[ 1.344148] usb-storage 1-3:1.0: >Quirks match for vid 1058 pid 0704: 8000
[ 1.348134] scsi0 : usb-storage 1-3:1.0
[ 1.348380] usbcore: registered new interface driver usb-storage
[ 1.348385] USB Mass Storage support registered.
[ 1.444194] usb 1-4: >new high-speed USB device number 5 using ehci_hcd
[ 1.573270] Floppy drive(s): fd0 is 1.44M
[ 1.577531] usb 1-4: >New USB device found, idVendor=05e3, idProduct=0608
[ 1.577539] usb 1-4: >New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.577543] usb 1-4: >Product: USB2.0 Hub
[ 1.578120] hub 1-4:1.0: >USB hub found
[ 1.578532] hub 1-4:1.0: >4 ports detected
[ 1.583833] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.583879] 8139cp 0000:00:0b.0: >This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.592151] FDC 0 is a post-1991 82077
[ 1.613974] sata_via 0000:00:0f.0: >version 2.6
[ 1.614070] sata_via 0000:00:0f.0: >routed to hard irq line 11
[ 1.617250] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.623918] scsi1 : sata_via
[ 1.628121] scsi2 : sata_via
[ 1.628271] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 20
[ 1.628277] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 20
[ 1.628461] pata_via 0000:00:0f.1: >version 0.3.4
[ 1.632131] scsi3 : pata_via
[ 1.636107] scsi4 : pata_via
[ 1.638975] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.638981] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.664664] 8139too 0000:00:0b.0: >eth0: RealTek RTL8139 at 0x0001b800, 00:40:f4:45:a2:2e, IRQ 19
[ 1.677469] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[ 1.677994] via-rhine 0000:00:12.0: >eth1: VIA Rhine II at 0xff6ffc00, 00:13:8f:68:12:07, IRQ 23
[ 1.678770] via-rhine 0000:00:12.0: >eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
[ 1.820095] usb 2-1: >new low-speed USB device number 2 using uhci_hcd
[ 1.832072] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.856712] ata3.00: ATA-6: ST380011A, 8.01, max UDMA/100
[ 1.856721] ata3.00: 156301488 sectors, multi 16: LBA48
[ 1.872537] ata3.00: configured for UDMA/100
[ 1.998112] usb 2-1: >New USB device found, idVendor=04fc, idProduct=05d8
[ 1.998120] usb 2-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.998124] usb 2-1: >Product: Trust Deskset 15220
[ 1.998128] usb 2-1: >Manufacturer: MLK
[ 2.044028] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.055632] scsi 3:0:0:0: >Direct-Access ATA ST380011A 8.01 PQ: 0 ANSI: 5
[ 2.056132] sd 3:0:0:0: >[sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.056237] sd 3:0:0:0: >[sda] Write Protect is off
[ 2.056243] sd 3:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[ 2.056287] sd 3:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.057733] sd 3:0:0:0: >Attached scsi generic sg0 type 0
[ 2.081072] usbcore: registered new interface driver usbhid
[ 2.081081] usbhid: USB HID core driver
[ 2.100741] sda: sda1 sda2 < sda5 >
[ 2.101448] sd 3:0:0:0: >[sda] Attached SCSI disk
[ 2.220420] ata4.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB04, max UDMA/33
[ 2.236250] ata4.00: configured for UDMA/33
[ 2.238466] scsi 4:0:0:0: >CD-ROM TSSTcorp CD/DVDW SH-S182D SB04 PQ: 0 ANSI: 5
[ 2.243885] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.243893] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.244196] sr 4:0:0:0: >Attached scsi CD-ROM sr0
[ 2.244339] sr 4:0:0:0: >Attached scsi generic sg1 type 5
[ 2.279416] input: MLK Trust Deskset 15220 as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input2
[ 2.305166] sunplus 0003:04FC:05D8.0001: >input,hidraw0: USB HID v1.00 Keyboard [MLK Trust Deskset 15220] on usb-0000:00:10.0-1/input0
[ 2.305207] sunplus 0003:04FC:05D8.0002: >fixing up Sunplus Wireless Desktop report descriptor
[ 2.317611] input: MLK Trust Deskset 15220 as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input3
[ 2.320317] sunplus 0003:04FC:05D8.0002: >input,hiddev0,hidraw1: USB HID v1.00 Mouse [MLK Trust Deskset 15220] on usb-0000:00:10.0-1/input1
[ 2.348790] scsi 0:0:0:0: >Direct-Access WD 1600BEV External 1.75 PQ: 0 ANSI: 4
[ 2.354947] sd 0:0:0:0: >Attached scsi generic sg2 type 0
[ 2.355299] sd 0:0:0:0: >[sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.355933] sd 0:0:0:0: >[sdb] Write Protect is off
[ 2.355941] sd 0:0:0:0: >[sdb] Mode Sense: 23 00 00 00
[ 2.356557] sd 0:0:0:0: >[sdb] No Caching mode page present
[ 2.356565] sd 0:0:0:0: >[sdb] Assuming drive cache: write through
[ 2.358564] sd 0:0:0:0: >[sdb] No Caching mode page present
[ 2.358573] sd 0:0:0:0: >[sdb] Assuming drive cache: write through
[ 2.975202] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 2.975211] EXT4-fs (sda1): write access will be enabled during recovery
[ 4.561263] sdb: sdb1 sdb2 < sdb5 sdb6 >
[ 4.565544] sd 0:0:0:0: >[sdb] No Caching mode page present
[ 4.565553] sd 0:0:0:0: >[sdb] Assuming drive cache: write through
[ 4.565558] sd 0:0:0:0: >[sdb] Attached SCSI disk
[ 5.102664] EXT4-fs (sda1): recovery complete
[ 5.118611] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 21.595387] Adding 1047548k swap on /dev/sda5. Priority:-1 extents:1 across:1047548k
[ 21.639520] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.639533] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 21.693522] udevd[332]: starting version 175
[ 21.810841] lp: driver loaded but no devices found
[ 22.012889] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 22.586734] parport_pc 00:06: >reported by Plug and Play ACPI
[ 22.586875] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 22.588082] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 22.685018] lp0: using parport0 (interrupt-driven).
[ 22.781013] [drm] Initialized drm 1.1.0 20060810
[ 23.238751] [drm] radeon defaulting to kernel modesetting.
[ 23.238760] [drm] radeon kernel modesetting enabled.
[ 23.260307] [drm] initializing kernel modesetting (RV350 0x1002:0x4152 0x174B:0x0830).
[ 23.260362] [drm] register mmio base: 0xFF5F0000
[ 23.260364] [drm] register mmio size: 65536
[ 23.263472] agpgart-via 0000:00:00.0: >AGP 3.5 bridge
[ 23.263498] agpgart-via 0000:00:00.0: >putting AGP V3 device into 8x mode
[ 23.263592] radeon 0000:01:00.0: >putting AGP V3 device into 8x mode
[ 23.263604] radeon 0000:01:00.0: >GTT: 64M 0xF8000000 - 0xFBFFFFFF
[ 23.263608] [drm] Generation 2 PCI interface, using max accessible memory
[ 23.263613] radeon 0000:01:00.0: >VRAM: 256M 0x00000000E0000000 - 0x00000000EFFFFFFF (256M used)
[ 23.263645] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 23.263648] [drm] Driver supports precise vblank timestamp query.
[ 23.263703] [drm] radeon: irq initialized.
[ 23.379325] [drm] Detected VRAM RAM=256M, BAR=256M
[ 23.379333] [drm] RAM width 128bits DDR
[ 23.385587] [TTM] Zone kernel: Available graphics memory: 445900 kiB
[ 23.385594] [TTM] Zone highmem: Available graphics memory: 513328 kiB
[ 23.385597] [TTM] Initializing pool allocator
[ 23.385606] [TTM] Initializing DMA pool allocator
[ 23.385666] [drm] radeon: 256M of VRAM memory ready
[ 23.385670] [drm] radeon: 64M of GTT memory ready.
[ 23.385737] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 23.387052] radeon 0000:01:00.0: >WB disabled
[ 23.387064] radeon 0000:01:00.0: >fence driver on ring 0 use gpu addr 0x00000000f8000000 and cpu addr 0xf8444000
[ 23.420179] [drm] Loading R300 Microcode
[ 23.452079] Linux video capture interface: v2.00
[ 23.481049] gspca_main: v2.14.0 registered
[ 23.501560] gspca_main: gspca_sn9c20x-2.14.0 probing 0c45:627b
[ 23.572423] gspca_sn9c20x: i2c_w error
[ 23.731804] microcode: CPU0 sig=0xf41, pf=0x10, revision=0x17
[ 23.776129] gspca_sn9c20x: OV7660 sensor initialization failed
[ 23.776166] gspca_sn9c20x: probe of 1-2:1.0 failed with error -5
[ 23.776365] usbcore: registered new interface driver gspca_sn9c20x
[ 24.747854] Bluetooth: Core ver 2.16
[ 24.747921] NET: Registered protocol family 31
[ 24.747923] Bluetooth: HCI device and connection manager initialized
[ 24.747925] Bluetooth: HCI socket layer initialized
[ 24.747926] Bluetooth: L2CAP socket layer initialized
[ 24.747933] Bluetooth: SCO socket layer initialized
[ 24.750112] ppdev: user-space parallel port driver
[ 24.796247] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.796255] Bluetooth: BNEP filters: protocol multicast
[ 25.536984] snd_via82xx 0000:00:11.5: >setting latency timer to 64
[ 25.758538] init: failsafe main process (656) killed by TERM signal
[ 26.739715] 8139too 0000:00:0b.0: >eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 26.812245] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 26.813769] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 27.139551] [drm] radeon: ring at 0x00000000F8001000
[ 27.139582] [drm] ring test succeeded in 0 usecs
[ 27.139934] [drm] ib test succeeded in 0 usecs
[ 27.145344] [drm] Radeon Display Connectors
[ 27.145352] [drm] Connector 0:
[ 27.145355] [drm] VGA-1
[ 27.145360] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 27.145362] [drm] Encoders:
[ 27.145364] [drm] CRT1: INTERNAL_DAC1
[ 27.145366] [drm] Connector 1:
[ 27.145369] [drm] DVI-I-1
[ 27.145371] [drm] HPD1
[ 27.145374] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 27.145375] [drm] Encoders:
[ 27.145377] [drm] CRT2: INTERNAL_DAC2
[ 27.145379] [drm] DFP1: INTERNAL_TMDS1
[ 27.145381] [drm] Connector 2:
[ 27.145384] [drm] SVIDEO-1
[ 27.145386] [drm] Encoders:
[ 27.145388] [drm] TV1: INTERNAL_DAC2
[ 27.162056] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 27.451090] [drm] fb mappable at 0xE0040000
[ 27.451099] [drm] vram apper at 0xE0000000
[ 27.451101] [drm] size 4177920
[ 27.451103] [drm] fb depth is 24
[ 27.451105] [drm] pitch is 5440
[ 27.451591] fbcon: radeondrmfb (fb0) is primary device
[ 27.457562] Console: switching to colour frame buffer device 170x48
[ 27.457613] fb0: radeondrmfb frame buffer device
[ 27.457617] drm: registered panic notifier
[ 27.457640] [drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 0
[ 34.337284] init: plymouth-stop pre-start process (1557) terminated with status 1
[ 47.832122] end_request: I/O error, dev fd0, sector 0
[ 47.860111] end_request: I/O error, dev fd0, sector 0
[ 48.099643] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 300.004031] [Hardware Error]: Machine check events logged
dajac@dajac-775VM800 ~ $ cat /var/log/messages
cat: /var/log/messages: No such file or directory
dajac@dajac-775VM800 ~ $
