Stranica: 1/3.
kubuntu/mint i internet :(
Postano: 04 vel 2009, 20:04
Postao/la meema
ovako, odlucila sam se sa XPa prebacit na linux...skinula sam prvo kubuntu, pa opensuse i na kraju linux mint...od svih, kubuntu mi se najvise svida (sucelje, jer jedino po tome mogu za sada suditi)...pokrenula sam liveCD i fakat mi predobro sve to izgleda, i puno mi brze radi nego windowsi...prebacila bih se ja odmah, ali je problem sto se ne mogu spojiti na net...na opensuse radi bez problema i ikakvih podesavanja, ali kubuntu i mint mi zadaju probleme
spajam se zicano na t-comov speectouch st780, ruter je stalno spojen na net...
pomozite mi sto da namjestim i kako???
probala sam sa sudo pppoeconf ali mi ne pomaze...pokusavala sam evenutalno nesto namjestiti u konekcijama, ali slabo se snalazim pa bih voljela ako mi netko moze tocno reci sto napraviti
hvala
Re: kubuntu/mint i internet :(
Postano: 04 vel 2009, 20:46
Postao/la 4ndY
Taj speedtouch je router i radi kao router po defaultu (barem koliko ja znam). To ti je "jupiii", jer se ne bi trebala načelno ništa brinut oko podešavanja (taj router ti da automatski sve podatke koji ti trebaju za spajanje na Net).
U prvu ruku probaj samo u konzolu u Kubuntuu upisat:
i probaj da li sad radi.
Ako ne radi, c/p ovdje na forum ispise sljedećih naredbi:
Pa se čujemo
Re: kubuntu/mint i internet :(
Postano: 04 vel 2009, 21:41
Postao/la meema
hmmm...s obzirom da pokrecem sa LiveCDa, ne znam di spremiti fajlove da ih mogu otvoriti sa windowsa???
Re: kubuntu/mint i internet :(
Postano: 04 vel 2009, 21:46
Postao/la Grof
meema je napisao/la:hmmm...s obzirom da pokrecem sa LiveCDa, ne znam di spremiti fajlove da ih mogu otvoriti sa windowsa???
Na USB stick
Re: kubuntu/mint i internet :(
Postano: 04 vel 2009, 21:50
Postao/la meema
hehehe
da fakat :p
idem opet
a jesam smotana
Re: kubuntu/mint i internet :(
Postano: 04 vel 2009, 21:59
Postao/la Grof
Nego konekcija na net iz Kubuntua....
KAd klikneš na tray ikonu sa dva monitora desnim gumbom, pa Connection information... što dobiješ tamo?
Re: kubuntu/mint i internet :(
Postano: 04 vel 2009, 22:17
Postao/la meema
evo log...
Kod: Označi sve
ubuntu@ubuntu:~$ sudo dhclient
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Listening on LPF/pan0/06:78:47:bc:07:b7
Sending on LPF/pan0/06:78:47:bc:07:b7
Listening on LPF/eth0/00:50:70:c5:24:ae
Sending on LPF/eth0/00:50:70:c5:24:ae
Sending on Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
DHCPOFFER of 93.139.33.57 from 192.168.1.1
DHCPREQUEST of 93.139.33.57 on eth0 to 255.255.255.255 port 67
DHCPACK of 93.139.33.57 from 192.168.1.1
SIOCADDRT: No such process
bound to 93.139.33.57 -- renewal in 42822 seconds.
ubuntu@ubuntu:~$ sudo lspci I grep Ethernet
Usage: lspci [<switches>]
Basic display modes:
-mm Produce machine-readable output (single -m for an obsolete format)
-t Show bus tree
Display options:
-v Be verbose (-vv for very verbose)
-k Show kernel drivers handling each device
-x Show hex-dump of the standard part of the config space
-xxx Show hex-dump of the whole config space (dangerous; root only)
-xxxx Show hex-dump of the 4096-byte extended config space (root only)
-b Bus-centric view (addresses and IRQ's as seen by the bus)
-D Always show domain numbers
Resolving of device ID's to names:
-n Show numeric ID's
-nn Show both textual and numeric ID's (names & numbers)
-q Query the PCI ID database for unknown ID's via DNS
-qq As above, but re-query locally cached entries
-Q Query the PCI ID database for all ID's via DNS
Selection of devices:
-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots
-d [<vendor>]:[<device>] Show only devices with specified ID's
Other options:
-i <file> Use specified ID database instead of /usr/share/misc/pci.ids.gz
-p <file> Look up kernel modules in a given file instead of default modules.pcimap
-M Enable `bus mapping' mode (dangerous; root only)
PCI access options:
-A <method> Use the specified PCI access method (see `-A help' for a list)
-O <par>=<val> Set PCI access parameter (see `-O help' for a list)
-G Enable PCI access debugging
-H <mode> Use direct hardware access (<mode> = 1 or 2)
-F <file> Read PCI configuration dump from a given file
ubuntu@ubuntu:~$ sudo ifconfig
eth0 Link encap:Ethernet HWaddr 00:50:70:c5:24:ae
inet addr:93.139.33.57 Bcast:93.255.255.255 Mask:255.0.0.0
inet6 addr: fe80::250:70ff:fec5:24ae/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:37 errors:0 dropped:0 overruns:0 frame:0
TX packets:40 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3296 (3.2 KB) TX bytes:7954 (7.9 KB)
Interrupt:23 Base address:0x8000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:20 errors:0 dropped:0 overruns:0 frame:0
TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:920 (920.0 B) TX bytes:920 (920.0 B)
pan0 Link encap:Ethernet HWaddr 06:78:47:bc:07:b7
inet6 addr: fe80::478:47ff:febc:7b7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:27 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:5115 (5.1 KB)
pan0:avahi Link encap:Ethernet HWaddr 06:78:47:bc:07:b7
inet addr:169.254.6.234 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
ubuntu@ubuntu:~$ ps -A I grep NetworkManager
ERROR: Unsupported option (BSD syntax)
********* simple selection ********* ********* selection by list *********
-A all processes -C by command name
-N negate selection -G by real group ID (supports names)
-a all w/ tty except session leaders -U by real user ID (supports names)
-d all except session leaders -g by session OR by effective group name
-e all processes -p by process ID
T all processes on this terminal -s processes in the sessions given
a all w/ tty, including other users -t by tty
g OBSOLETE -- DO NOT USE -u by effective user ID (supports names)
r only running processes U processes for specified users
x processes w/o controlling ttys t by tty
*********** output format ********** *********** long options ***********
-o,o user-defined -f full --Group --User --pid --cols --ppid
-j,j job control s signal --group --user --sid --rows --info
-O,O preloaded -o v virtual memory --cumulative --format --deselect
-l,l long u user-oriented --sort --tty --forest --version
-F extra full X registers --heading --no-heading --context
********* misc options *********
-V,V show version L list format codes f ASCII art forest
-m,m,-L,-T,H threads S children in sum -y change -l format
-M,Z security data c true command name -c scheduling class
-w,w wide output n numeric WCHAN,UID -H process hierarchy
kada utipkam sudo pppoeconfig ovako izgleda...
prvo mi se ovo pokaze...
pa skenira...
i onda ovo...
idem vidit sta pise pod info...
Re: kubuntu/mint i internet :(
Postano: 04 vel 2009, 22:21
Postao/la Grof
krivo tipkaš
ovako se piše:
znak
| - nije veliko I nego desni ALT+W!!!!!!
Zašto jednostavno ne copy/pastaš tekst iz posta u terminal? (terminal ne podržava CTRL-C, nego desni gumb miša pa Paste!)
Re: kubuntu/mint i internet :(
Postano: 04 vel 2009, 22:35
Postao/la meema
a kvragu...
ne mogu nac connection information...kliknem na onu ikonu di se prebacuju monitori, ali nema te opcije???
idem ponovno u terminal
umrijet ce mi komp od ovolikog restartanja
Re: kubuntu/mint i internet :(
Postano: 04 vel 2009, 22:55
Postao/la meema
Kod: Označi sve
ubuntu@ubuntu:~$ sudo lspci ǀ grep Ethernet
Usage: lspci [<switches>]
Basic display modes:
-mm Produce machine-readable output (single -m for an obsolete format)
-t Show bus tree
Display options:
-v Be verbose (-vv for very verbose)
-k Show kernel drivers handling each device
-x Show hex-dump of the standard part of the config space
-xxx Show hex-dump of the whole config space (dangerous; root only)
-xxxx Show hex-dump of the 4096-byte extended config space (root only)
-b Bus-centric view (addresses and IRQ's as seen by the bus)
-D Always show domain numbers
Resolving of device ID's to names:
-n Show numeric ID's
-nn Show both textual and numeric ID's (names & numbers)
-q Query the PCI ID database for unknown ID's via DNS
-qq As above, but re-query locally cached entries
-Q Query the PCI ID database for all ID's via DNS
Selection of devices:
-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots
-d [<vendor>]:[<device>] Show only devices with specified ID's
Other options:
-i <file> Use specified ID database instead of /usr/share/misc/pci.ids.gz
-p <file> Look up kernel modules in a given file instead of default modules.pcimap
-M Enable `bus mapping' mode (dangerous; root only)
PCI access options:
-A <method> Use the specified PCI access method (see `-A help' for a list)
-O <par>=<val> Set PCI access parameter (see `-O help' for a list)
-G Enable PCI access debugging
-H <mode> Use direct hardware access (<mode> = 1 or 2)
-F <file> Read PCI configuration dump from a given file
ubuntu@ubuntu:~$ sudo ifconfig
eth0 Link encap:Ethernet HWaddr 00:50:70:c5:24:ae
inet addr:93.139.33.57 Bcast:93.255.255.255 Mask:255.0.0.0
inet6 addr: fe80::250:70ff:fec5:24ae/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:44 errors:0 dropped:0 overruns:0 frame:0
TX packets:27 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3178 (3.1 KB) TX bytes:4493 (4.4 KB)
Interrupt:23 Base address:0xa000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:20 errors:0 dropped:0 overruns:0 frame:0
TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:920 (920.0 B) TX bytes:920 (920.0 B)
ubuntu@ubuntu:~$ ps -A ǀ grep NetworkManager
ERROR: Garbage option.
********* simple selection ********* ********* selection by list *********
-A all processes -C by command name
-N negate selection -G by real group ID (supports names)
-a all w/ tty except session leaders -U by real user ID (supports names)
-d all except session leaders -g by session OR by effective group name
-e all processes -p by process ID
T all processes on this terminal -s processes in the sessions given
a all w/ tty, including other users -t by tty
g OBSOLETE -- DO NOT USE -u by effective user ID (supports names)
r only running processes U processes for specified users
x processes w/o controlling ttys t by tty
*********** output format ********** *********** long options ***********
-o,o user-defined -f full --Group --User --pid --cols --ppid
-j,j job control s signal --group --user --sid --rows --info
-O,O preloaded -o v virtual memory --cumulative --format --deselect
-l,l long u user-oriented --sort --tty --forest --version
-F extra full X registers --heading --no-heading --context
********* misc options *********
-V,V show version L list format codes f ASCII art forest
-m,m,-L,-T,H threads S children in sum -y change -l format
-M,Z security data c true command name -c scheduling class
-w,w wide output n numeric WCHAN,UID -H process hierarchy
