Sada je: 08 pro 2019, 17:43.
Diskusije o hardveru i driverima pod Linuxom.

Moderator/ica: Moderatori/ce

Pozdrav svima!
Imam problem sa tastaturom i misem kad startujem sistem. Koristim Ubuntu 12.04. Imam instaliran i windows 7, pa kad biram koji cu sistem tastatura radi normalno, medjutim kad pokrene linux, moram da cekam nekoliko minuta pre nego sto tastatura i mis krenu sa radom. Kad krenu posle odredjenog vremena, onda sve ide normalno, nema bagova uopste.
Avatar
Postovi: 7
Postovi: 7
Pridružen/a: 03 srp 2012, 19:50
Podijelio/la zahvalu: 0 puta
Primio/la zahvalu: 0 puta
Spol: M
OS: Ubuntu 12.04
Ovo se znalo i meni desiti na ubuntu. Koju tipkovnicu/mis imas? Ja koristim Logitech K520 wireless... mozda je do wireless signala?
stefan je napisao/la:tu mač gemišta

To understand recursion, you must first understand recursion.
Avatar
Postovi: 1536
Postovi: 1536
Pridružen/a: 22 tra 2012, 08:55
Lokacija: ForHill Croatia
Podijelio/la zahvalu: 20 puta
Primio/la zahvalu: 26 puta
Spol: M
OS: eOS Luna
Ako je wireless, ga onda u BIOS-u postavi za prvi boot device. Ako nije, onda za svaki slučaj provjeri da li se tipkovnica pokreće tijekom paljenja pc-a (enable keyboard -> yes)
Abzeenth je napisao/la:Dobro onda. Baš me briga. Krepajte od offtopica.

jurastublic je napisao/la:Ovaj thread me podsjeća na krepanu mačku. Treba to pokupit lopatom i zakopat. Onda dezinficirati lopatu. :-D
Avatar
Moderator
Postovi: 5818
Moderator
Postovi: 5818
Pridružen/a: 25 ožu 2012, 14:29
Lokacija: ~/kauč
Podijelio/la zahvalu: 155 puta
Primio/la zahvalu: 250 puta
Spol: M
OS: Mint 17.3 Cimet
Otvori terminal, ukucaj dmesg i kopiraj ovdje
Lutherus je napisao/la:Ne postoje linuksi, postoji samo Linux i on je jedan i on je kernel.

Is Linux About Choice? || Pulsir - awesome blogging site :D
iv@n je napisao/la:Divide et impera i kako se kaže na latinskom da je ljudska glupost neuništiva.
Avatar
Postovi: 6781
Postovi: 6781
Pridružen/a: 06 lis 2011, 01:29
Lokacija: ~$
Podijelio/la zahvalu: 145 puta
Primio/la zahvalu: 58 puta
Spol: M
OS: Ovisi za sta
Nije wireless, imam Logitech g15, a mis je Gigabyte M6880.

Ukucao sam dmesg i evo sta je izaslo.
Kod: Označi sve
-> IRQ 23
[    0.368037] pci 0000:00:02.0: PCI INT A disabled
[    0.368151] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
[    0.368162] pci 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 22 (level, low) -> IRQ 22
[    0.368174] pci 0000:00:02.1: PCI INT B disabled
[    0.368281] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 21
[    0.368291] pci 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 21 (level, low) -> IRQ 21
[    0.384035] pci 0000:00:04.0: PCI INT A disabled
[    0.384150] ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 20
[    0.384159] pci 0000:00:04.1: PCI INT B -> Link[AU2B] -> GSI 20 (level, low) -> IRQ 20
[    0.384171] pci 0000:00:04.1: PCI INT B disabled
[    0.384275] pci 0000:00:07.0: Enabling HT MSI Mapping
[    0.384375] pci 0000:00:08.0: Enabling HT MSI Mapping
[    0.384481] pci 0000:00:09.0: Enabling HT MSI Mapping
[    0.384593] pci 0000:00:0a.0: Enabling HT MSI Mapping
[    0.384842] pci 0000:02:00.0: Boot video device
[    0.384845] PCI: CLS 32 bytes, default 64
[    0.385214] audit: initializing netlink socket (disabled)
[    0.385222] type=2000 audit(1341351533.380:1): initialized
[    0.415316] highmem bounce pool size: 64 pages
[    0.415322] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.436757] VFS: Disk quotas dquot_6.5.2
[    0.436826] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.437369] fuse init (API version 7.17)
[    0.437459] msgmni has been set to 1625
[    0.437770] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.437796] io scheduler noop registered
[    0.437798] io scheduler deadline registered
[    0.437804] io scheduler cfq registered (default)
[    0.438381] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.438410] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.438585] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.438591] ACPI: Power Button [PWRB]
[    0.438667] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.438670] ACPI: Power Button [PWRF]
[    0.438732] ACPI: Fan [FAN] (on)
[    0.441881] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20110623/nspredef-463)
[    0.441887] ACPI: [Package] has zero elements (f24f50a0)
[    0.441889] ACPI: Invalid passive threshold
[    0.442040] thermal LNXTHERM:00: registered as thermal_zone0
[    0.442043] ACPI: Thermal Zone [THRM] (40 C)
[    0.442101] ERST: Table is not found!
[    0.442102] GHES: HEST is not enabled!
[    0.442194] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.452321] isapnp: Scanning for PnP cards...
[    0.462597] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.509262] Freeing initrd memory: 13808k freed
[    0.805234] isapnp: No Plug & Play device found
[    0.880637] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.892321] Linux agpgart interface v0.103
[    0.894315] brd: module loaded
[    0.895265] loop: module loaded
[    0.895427] ahci 0000:00:09.0: version 3.0
[    0.895599] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[    0.895604] ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    0.895650] ahci 0000:00:09.0: irq 40 for MSI/MSI-X
[    0.895656] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
[    0.895736] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
[    0.895740] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio boh
[    0.895743] ahci 0000:00:09.0: setting latency timer to 64
[    0.896950] scsi0 : ahci
[    0.897097] scsi1 : ahci
[    0.897216] scsi2 : ahci
[    0.897326] scsi3 : ahci
[    0.897434] scsi4 : ahci
[    0.897542] scsi5 : ahci
[    0.897692] ata1: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026100 irq 40
[    0.897695] ata2: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 40
[    0.897698] ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 40
[    0.897700] ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 40
[    0.897703] ata5: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300 irq 40
[    0.897706] ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380 irq 40
[    0.897899] pata_acpi 0000:00:06.0: setting latency timer to 64
[    0.898307] Fixed MDIO Bus: probed
[    0.898330] tun: Universal TUN/TAP device driver, 1.6
[    0.898331] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.898402] PPP generic driver version 2.4.2
[    0.898542] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.898558] ehci_hcd 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 22 (level, low) -> IRQ 22
[    0.898575] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    0.898578] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    0.898634] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.898658] ehci_hcd 0000:00:02.1: debug port 1
[    0.898666] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
[    0.898689] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
[    0.908029] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.908166] hub 1-0:1.0: USB hub found
[    0.908171] hub 1-0:1.0: 6 ports detected
[    0.908245] ehci_hcd 0000:00:04.1: PCI INT B -> Link[AU2B] -> GSI 20 (level, low) -> IRQ 20
[    0.908254] ehci_hcd 0000:00:04.1: setting latency timer to 64
[    0.908256] ehci_hcd 0000:00:04.1: EHCI Host Controller
[    0.908310] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[    0.908330] ehci_hcd 0000:00:04.1: debug port 1
[    0.908336] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[    0.908353] ehci_hcd 0000:00:04.1: irq 20, io mem 0xfe02c000
[    0.920026] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    0.920152] hub 2-0:1.0: USB hub found
[    0.920155] hub 2-0:1.0: 6 ports detected
[    0.920226] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.920238] ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23
[    0.920247] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    0.920249] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    0.920307] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[    0.920333] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[    0.978142] hub 3-0:1.0: USB hub found
[    0.978147] hub 3-0:1.0: 6 ports detected
[    0.978213] ohci_hcd 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 21 (level, low) -> IRQ 21
[    0.978221] ohci_hcd 0000:00:04.0: setting latency timer to 64
[    0.978224] ohci_hcd 0000:00:04.0: OHCI Host Controller
[    0.978276] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[    0.978299] ohci_hcd 0000:00:04.0: irq 21, io mem 0xfe02d000
[    1.034130] hub 4-0:1.0: USB hub found
[    1.034135] hub 4-0:1.0: 6 ports detected
[    1.034202] uhci_hcd: USB Universal Host Controller Interface driver
[    1.034269] usbcore: registered new interface driver libusual
[    1.034317] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.034771] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.034778] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.034958] mousedev: PS/2 mouse device common for all mice
[    1.035144] rtc_cmos 00:04: RTC can wake from S4
[    1.035350] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.035400] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    1.035461] device-mapper: uevent: version 1.0.3
[    1.035543] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.035588] EISA: Probing bus 0 at eisa.0
[    1.035591] EISA: Cannot allocate resource for mainboard
[    1.035593] Cannot allocate resource for EISA slot 1
[    1.035595] Cannot allocate resource for EISA slot 2
[    1.035597] Cannot allocate resource for EISA slot 3
[    1.035599] Cannot allocate resource for EISA slot 4
[    1.035601] Cannot allocate resource for EISA slot 5
[    1.035603] Cannot allocate resource for EISA slot 6
[    1.035605] Cannot allocate resource for EISA slot 7
[    1.035607] Cannot allocate resource for EISA slot 8
[    1.035609] EISA: Detected 0 cards.
[    1.035620] cpufreq-nforce2: No nForce2 chipset.
[    1.035622] cpuidle: using governor ladder
[    1.035624] cpuidle: using governor menu
[    1.035626] EFI Variables Facility v0.08 2004-May-17
[    1.035846] TCP cubic registered
[    1.035960] NET: Registered protocol family 10
[    1.036500] NET: Registered protocol family 17
[    1.036504] Registering the dns_resolver key type
[    1.036525] Using IPI No-Shortcut mode
[    1.036650] PM: Hibernation image not present or could not be loaded.
[    1.036661] registered taskstats version 1
[    1.053868]   Magic number: 4:41:651
[    1.053879] scsi_host host5: hash matches
[    1.053881] scsi host5: hash matches
[    1.054023] rtc_cmos 00:04: setting system clock to 2012-07-03 21:38:54 UTC (1341351534)
[    1.054032] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (2 cpu cores) (version 2.20.00)
[    1.054073] powernow-k8: fid 0x12 (2600 MHz), vid 0x9
[    1.054075] powernow-k8: fid 0x10 (2400 MHz), vid 0xb
[    1.054077] powernow-k8: fid 0xe (2200 MHz), vid 0xd
[    1.054078] powernow-k8: fid 0xc (2000 MHz), vid 0xf
[    1.054080] powernow-k8: fid 0xa (1800 MHz), vid 0x11
[    1.054082] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[    1.054153] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.054156] EDD information not available.
[    1.216040] ata6: SATA link down (SStatus 0 SControl 300)
[    1.216059] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.216074] ata4: SATA link down (SStatus 0 SControl 300)
[    1.216086] ata5: SATA link down (SStatus 0 SControl 300)
[    1.216102] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.216114] ata2: SATA link down (SStatus 0 SControl 300)
[    1.216922] ata1.00: ATA-8: WDC WD3200AAKS-00B3A0, 01.03A01, max UDMA/133
[    1.216925] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.217121] ata3.00: ATAPI: Optiarc DVD RW AD-7200S, 1.06, max UDMA/100
[    1.217811] ata1.00: configured for UDMA/133
[    1.217966] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200AAKS-0 01.0 PQ: 0 ANSI: 5
[    1.218108] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.218137] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.218153] sd 0:0:0:0: [sda] Write Protect is off
[    1.218156] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.218175] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.218444] ata3.00: configured for UDMA/100
[    1.220026] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.220549] scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-7200S  1.06 PQ: 0 ANSI: 5
[    1.222723] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.222725] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.222845] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.222914] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    1.308203]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    1.308797] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.308875] Freeing unused kernel memory: 740k freed
[    1.309314] Write protecting the kernel text: 5816k
[    1.309333] Write protecting the kernel read-only data: 2376k
[    1.309335] NX-protecting the kernel data: 4424k
[    1.327100] udevd[97]: starting version 175
[    1.482264] pata_amd 0000:00:06.0: version 0.4.1
[    1.482309] pata_amd 0000:00:06.0: setting latency timer to 64
[    1.491222] scsi6 : pata_amd
[    1.494809] scsi7 : pata_amd
[    1.495206] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.495209] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.495343] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.495488] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[    1.495494] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
[    1.495498] forcedeth 0000:00:0a.0: setting latency timer to 64
[    1.557237] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:23:54:16:7a:db
[    1.557242] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
[    1.659072] ata8: port disabled--ignoring
[    1.659908] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[    1.659927] firewire_ohci 0000:01:0a.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[    1.712082] firewire_ohci: Added fw-ohci device 0000:01:0a.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[    1.991429] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    2.212125] firewire_core: created device fw0: GUID 001e8c000184436a, S400
[    4.202082] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.479783] udevd[516]: starting version 175
[    4.534231] Adding 4191228k swap on /dev/sda8.  Priority:-1 extents:1 across:4191228k
[    4.824488] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[    5.429267] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[    5.434363] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[    5.434370] ACPI: resource nForce2_smbus [io  0x1c40-0x1c7f] conflicts with ACPI region SM00 [io 0x1c40-0x1c7f]
[    5.434373] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.462711] wmi: Mapper loaded
[    5.517134] lp: driver loaded but no devices found
[    5.683148] Linux video capture interface: v2.00
[    5.845205] IR NEC protocol handler initialized
[    5.879525] nvidia: module license 'NVIDIA' taints kernel.
[    5.879530] Disabling lock debugging due to kernel taint
[    5.933072] IR RC5(x) protocol handler initialized
[    5.946546] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded
[    5.946733] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[    5.946751] cx8800 0000:01:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[    5.948436] cx88[0]: Your board isn't known (yet) to the driver.  You can
[    5.948437] cx88[0]: try to pick one of the existing card configs via
[    5.948438] cx88[0]: card=<n> insmod option.  Updating to the latest
[    5.948439] cx88[0]: version might help as well.
[    5.948442] cx88[0]: Here is a list of valid choices for the card=<n> insmod option:
[    5.948444] cx88[0]:    card=0 -> UNKNOWN/GENERIC
[    5.948447] cx88[0]:    card=1 -> Hauppauge WinTV 34xxx models
[    5.948448] cx88[0]:    card=2 -> GDI Black Gold
[    5.948450] cx88[0]:    card=3 -> PixelView
[    5.948452] cx88[0]:    card=4 -> ATI TV Wonder Pro
[    5.948454] cx88[0]:    card=5 -> Leadtek Winfast 2000XP Expert
[    5.948456] cx88[0]:    card=6 -> AverTV Studio 303 (M126)
[    5.948458] cx88[0]:    card=7 -> MSI TV-@nywhere Master
[    5.948460] cx88[0]:    card=8 -> Leadtek Winfast DV2000
[    5.948462] cx88[0]:    card=9 -> Leadtek PVR 2000
[    5.948464] cx88[0]:    card=10 -> IODATA GV-VCP3/PCI
[    5.948466] cx88[0]:    card=11 -> Prolink PlayTV PVR
[    5.948468] cx88[0]:    card=12 -> ASUS PVR-416
[    5.948469] cx88[0]:    card=13 -> MSI TV-@nywhere
[    5.948471] cx88[0]:    card=14 -> KWorld/VStream XPert DVB-T
[    5.948473] cx88[0]:    card=15 -> DViCO FusionHDTV DVB-T1
[    5.948475] cx88[0]:    card=16 -> KWorld LTV883RF
[    5.948477] cx88[0]:    card=17 -> DViCO FusionHDTV 3 Gold-Q
[    5.948479] cx88[0]:    card=18 -> Hauppauge Nova-T DVB-T
[    5.948481] cx88[0]:    card=19 -> Conexant DVB-T reference design
[    5.948483] cx88[0]:    card=20 -> Provideo PV259
[    5.948485] cx88[0]:    card=21 -> DViCO FusionHDTV DVB-T Plus
[    5.948487] cx88[0]:    card=22 -> pcHDTV HD3000 HDTV
[    5.948489] cx88[0]:    card=23 -> digitalnow DNTV Live! DVB-T
[    5.948491] cx88[0]:    card=24 -> Hauppauge WinTV 28xxx (Roslyn) models
[    5.948493] cx88[0]:    card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC)
[    5.948495] cx88[0]:    card=26 -> IODATA GV/BCTV7E
[    5.948497] cx88[0]:    card=27 -> PixelView PlayTV Ultra Pro (Stereo)
[    5.948499] cx88[0]:    card=28 -> DViCO FusionHDTV 3 Gold-T
[    5.948501] cx88[0]:    card=29 -> ADS Tech Instant TV DVB-T PCI
[    5.948503] cx88[0]:    card=30 -> TerraTec Cinergy 1400 DVB-T
[    5.948505] cx88[0]:    card=31 -> DViCO FusionHDTV 5 Gold
[    5.948507] cx88[0]:    card=32 -> AverMedia UltraTV Media Center PCI 550
[    5.948509] cx88[0]:    card=33 -> Kworld V-Stream Xpert DVD
[    5.948511] cx88[0]:    card=34 -> ATI HDTV Wonder
[    5.948513] cx88[0]:    card=35 -> WinFast DTV1000-T
[    5.948515] cx88[0]:    card=36 -> AVerTV 303 (M126)
[    5.948517] cx88[0]:    card=37 -> Hauppauge Nova-S-Plus DVB-S
[    5.948519] cx88[0]:    card=38 -> Hauppauge Nova-SE2 DVB-S
[    5.948521] cx88[0]:    card=39 -> KWorld DVB-S 100
[    5.948523] cx88[0]:    card=40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid
[    5.948525] cx88[0]:    card=41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile)
[    5.948527] cx88[0]:    card=42 -> digitalnow DNTV Live! DVB-T Pro
[    5.948529] cx88[0]:    card=43 -> KWorld/VStream XPert DVB-T with cx22702
[    5.948532] cx88[0]:    card=44 -> DViCO FusionHDTV DVB-T Dual Digital
[    5.948534] cx88[0]:    card=45 -> KWorld HardwareMpegTV XPert
[    5.948536] cx88[0]:    card=46 -> DViCO FusionHDTV DVB-T Hybrid
[    5.948538] cx88[0]:    card=47 -> pcHDTV HD5500 HDTV
[    5.948540] cx88[0]:    card=48 -> Kworld MCE 200 Deluxe
[    5.948542] cx88[0]:    card=49 -> PixelView PlayTV P7000
[    5.948544] cx88[0]:    card=50 -> NPG Tech Real TV FM Top 10
[    5.948546] cx88[0]:    card=51 -> WinFast DTV2000 H
[    5.948547] cx88[0]:    card=52 -> Geniatech DVB-S
[    5.948549] cx88[0]:    card=53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T
[    5.948552] cx88[0]:    card=54 -> Norwood Micro TV Tuner
[    5.948554] cx88[0]:    card=55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM
[    5.948556] cx88[0]:    card=56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder
[    5.948558] cx88[0]:    card=57 -> ADS Tech Instant Video PCI
[    5.948561] cx88[0]:    card=58 -> Pinnacle PCTV HD 800i
[    5.948562] cx88[0]:    card=59 -> DViCO FusionHDTV 5 PCI nano
[    5.948564] cx88[0]:    card=60 -> Pinnacle Hybrid PCTV
[    5.948566] cx88[0]:    card=61 -> Leadtek TV2000 XP Global
[    5.948568] cx88[0]:    card=62 -> PowerColor RA330
[    5.948570] cx88[0]:    card=63 -> Geniatech X8000-MT DVBT
[    5.948572] cx88[0]:    card=64 -> DViCO FusionHDTV DVB-T PRO
[    5.948574] cx88[0]:    card=65 -> DViCO FusionHDTV 7 Gold
[    5.948576] cx88[0]:    card=66 -> Prolink Pixelview MPEG 8000GT
[    5.948578] cx88[0]:    card=67 -> Kworld PlusTV HD PCI 120 (ATSC 120)
[    5.948580] cx88[0]:    card=68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid
[    5.948583] cx88[0]:    card=69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2
[    5.948585] cx88[0]:    card=70 -> TeVii S460 DVB-S/S2
[    5.948587] cx88[0]:    card=71 -> Omicom SS4 DVB-S/S2 PCI
[    5.948588] cx88[0]:    card=72 -> TBS 8920 DVB-S/S2
[    5.948590] cx88[0]:    card=73 -> TeVii S420 DVB-S
[    5.948592] cx88[0]:    card=74 -> Prolink Pixelview Global Extreme
[    5.948594] cx88[0]:    card=75 -> PROF 7300 DVB-S/S2
[    5.948596] cx88[0]:    card=76 -> SATTRADE ST4200 DVB-S/S2
[    5.948598] cx88[0]:    card=77 -> TBS 8910 DVB-S
[    5.948600] cx88[0]:    card=78 -> Prof 6200 DVB-S
[    5.948602] cx88[0]:    card=79 -> Terratec Cinergy HT PCI MKII
[    5.948604] cx88[0]:    card=80 -> Hauppauge WinTV-IR Only
[    5.948606] cx88[0]:    card=81 -> Leadtek WinFast DTV1800 Hybrid
[    5.948608] cx88[0]:    card=82 -> WinFast DTV2000 H rev. J
[    5.948610] cx88[0]:    card=83 -> Prof 7301 DVB-S/S2
[    5.948612] cx88[0]:    card=84 -> Samsung SMT 7020 DVB-S
[    5.948614] cx88[0]:    card=85 -> Twinhan VP-1027 DVB-S
[    5.948616] cx88[0]:    card=86 -> TeVii S464 DVB-S/S2
[    5.948618] cx88[0]:    card=87 -> Leadtek WinFast DTV2000 H PLUS
[    5.948620] cx88[0]:    card=88 -> Leadtek WinFast DTV1800 H (XC4000)
[    5.948623] cx88[0]: subsystem: 185b:e000, board: UNKNOWN/GENERIC [card=0,autodetected], frontend(s): 0
[    5.948626] cx88[0]: TV tuner type -1, Radio tuner type -1
[    6.300682] nvidia 0000:02:00.0: PCI INT A -> Link[AE0A] -> GSI 16 (level, low) -> IRQ 16
[    6.300693] nvidia 0000:02:00.0: setting latency timer to 64
[    6.300698] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    6.300960] NVRM: loading NVIDIA UNIX x86 Kernel Module  295.49  Mon Apr 30 23:30:07 PDT 2012
[    6.306924] i2c-core: driver [tuner] using legacy suspend method
[    6.306928] i2c-core: driver [tuner] using legacy resume method
[    6.314653] tuner 1-0061: Tuner -1 found with type(s) Radio TV.
[    6.317657] IR RC6 protocol handler initialized
[    6.355517] cx88[0]/0: found at 0000:01:09.0, rev: 5, irq: 17, latency: 32, mmio: 0xfa000000
[    6.355568] tuner 1-0061: tuner type not set
[    6.355719] cx88[0]/0: registered device video0 [v4l2]
[    6.355783] cx88[0]/0: registered device vbi0
[    6.413773] IR JVC protocol handler initialized
[    6.419224] IR Sony protocol handler initialized
[    6.472319] IR MCE Keyboard/mouse protocol handler initialized
[    6.512133] cx2388x alsa driver version 0.0.9 loaded
[    6.512180] cx88_audio 0000:01:09.1: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[    6.512204] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[    6.611285] lirc_dev: IR Remote Control driver registered, major 250
[    6.995376] IR LIRC bridge handler initialized
[    7.050113] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
[    7.050120] snd_hda_intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
[    7.050125] hda_intel: Disabling MSI
[    7.050156] snd_hda_intel 0000:00:07.0: setting latency timer to 64
[    7.136537] type=1400 audit(1341344340.581:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=791 comm="apparmor_parser"
[    7.136557] type=1400 audit(1341344340.581:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=790 comm="apparmor_parser"
[    7.136943] type=1400 audit(1341344340.581:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=791 comm="apparmor_parser"
[    7.136966] type=1400 audit(1341344340.581:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=790 comm="apparmor_parser"
[    7.137173] type=1400 audit(1341344340.581:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=791 comm="apparmor_parser"
[    7.137204] type=1400 audit(1341344340.581:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=790 comm="apparmor_parser"
[    8.688460] init: failsafe main process (918) killed by TERM signal
[    9.765197] ppdev: user-space parallel port driver
[   10.026597] type=1400 audit(1341344343.469:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1036 comm="apparmor_parser"
[   10.027082] type=1400 audit(1341344343.469:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1036 comm="apparmor_parser"
[   10.127946] type=1400 audit(1341344343.569:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1045 comm="apparmor_parser"
[   10.128427] type=1400 audit(1341344343.573:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1045 comm="apparmor_parser"
[   10.178448] Bluetooth: Core ver 2.16
[   10.178481] NET: Registered protocol family 31
[   10.178483] Bluetooth: HCI device and connection manager initialized
[   10.178487] Bluetooth: HCI socket layer initialized
[   10.178489] Bluetooth: L2CAP socket layer initialized
[   10.178495] Bluetooth: SCO socket layer initialized
[   10.267507] Bluetooth: RFCOMM TTY layer initialized
[   10.267512] Bluetooth: RFCOMM socket layer initialized
[   10.267514] Bluetooth: RFCOMM ver 1.11
[   10.321749] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[   10.321753] vesafb: scrolling: redraw
[   10.321756] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   10.322568] vesafb: framebuffer at 0xf7000000, mapped to 0xf8a80000, using 5120k, total 5120k
[   10.322671] fbcon: VESA VGA (fb0) is primary device
[   10.322808] Console: switching to colour frame buffer device 160x64
[   10.322842] fb0: VESA VGA frame buffer device
[   10.407980] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.407984] Bluetooth: BNEP filters: protocol multicast
[   11.593559] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X
[   16.332038] usb 1-1: device descriptor read/64, error -110
[   22.752025] eth0: no IPv6 routers present
[   31.548047] usb 1-1: device descriptor read/64, error -110
[   31.764051] usb 1-1: new high-speed USB device number 3 using ehci_hcd
[   46.876044] usb 1-1: device descriptor read/64, error -110
[   62.092036] usb 1-1: device descriptor read/64, error -110
[   62.308055] usb 1-1: new high-speed USB device number 4 using ehci_hcd
[   67.328123] usb 1-1: device descriptor read/8, error -110
[   72.448172] usb 1-1: device descriptor read/8, error -110
[   72.664046] usb 1-1: new high-speed USB device number 5 using ehci_hcd
[   77.684189] usb 1-1: device descriptor read/8, error -110
[   82.804366] usb 1-1: device descriptor read/8, error -110
[   82.908089] hub 1-0:1.0: unable to enumerate USB device on port 1
[   83.460094] usb 4-1: new full-speed USB device number 2 using ohci_hcd
[   83.672753] hub 4-1:1.0: USB hub found
[   83.675626] hub 4-1:1.0: 4 ports detected
[   83.996062] usb 4-2: new low-speed USB device number 3 using ohci_hcd
[   84.301096] input: Dual USB Vibration Joystick as /devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0/input/input2
[   84.301346] generic-usb 0003:12BD:E002.0001: input,hidraw0: USB HID v1.10 Joystick [Dual USB Vibration Joystick] on usb-0000:00:04.0-2/input0
[   84.318076] input: Dual USB Vibration Joystick as /devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.1/input/input3
[   84.318293] generic-usb 0003:12BD:E002.0002: input,hidraw1: USB HID v1.10 Joystick [Dual USB Vibration Joystick] on usb-0000:00:04.0-2/input1
[   84.318336] usbcore: registered new interface driver usbhid
[   84.318341] usbhid: USB HID core driver
[   84.512067] usb 3-1: new full-speed USB device number 2 using ohci_hcd
[   99.688073] usb 3-1: device descriptor read/64, error -110
[  114.968073] usb 3-1: device descriptor read/64, error -110
[  115.248048] usb 3-1: new full-speed USB device number 3 using ohci_hcd
[  130.424055] usb 3-1: device descriptor read/64, error -110
[  145.704056] usb 3-1: device descriptor read/64, error -110
[  145.984043] usb 3-1: new full-speed USB device number 4 using ohci_hcd
[  151.004283] usb 3-1: device descriptor read/8, error -110
[  156.124850] usb 3-1: device descriptor read/8, error -110
[  156.404050] usb 3-1: new full-speed USB device number 5 using ohci_hcd
[  161.424492] usb 3-1: device descriptor read/8, error -110
[  166.545057] usb 3-1: device descriptor read/8, error -110
[  166.648105] hub 3-0:1.0: unable to enumerate USB device on port 1
[  166.952062] usb 3-2: new low-speed USB device number 6 using ohci_hcd
[  167.175527] input: Mouse USB Laser Mouse as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/input/input4
[  167.175964] generic-usb 0003:FFC0:0040.0003: input,hidraw2: USB HID v1.11 Mouse [Mouse USB Laser Mouse] on usb-0000:00:02.0-2/input0
[  167.381480] usb 4-1.1: new low-speed USB device number 4 using ohci_hcd
[  167.503654] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1.1/4-1.1:1.0/input/input5
[  167.503999] generic-usb 0003:046D:C226.0004: input,hidraw3: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:04.0-1.1/input0
[  167.516659] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1.1/4-1.1:1.1/input/input6
[  167.516986] generic-usb 0003:046D:C226.0005: input,hiddev0,hidraw4: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:04.0-1.1/input1
[  167.593585] usb 4-1.4: new full-speed USB device number 5 using ohci_hcd
[  167.737892] input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1.4/4-1.4:1.0/input/input7
[  167.738262] generic-usb 0003:046D:C227.0006: input,hiddev0,hidraw5: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:04.0-1.4/input0
[  186.711191] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[  793.595148] NET: Registered protocol family 4
Avatar
Postovi: 7
Postovi: 7
Pridružen/a: 03 srp 2012, 19:50
Podijelio/la zahvalu: 0 puta
Primio/la zahvalu: 0 puta
Spol: M
OS: Ubuntu 12.04
Probaj spojit ih spojit na druge USB portove, takodjer probaj odspojit Joystick
Lutherus je napisao/la:Ne postoje linuksi, postoji samo Linux i on je jedan i on je kernel.

Is Linux About Choice? || Pulsir - awesome blogging site :D
iv@n je napisao/la:Divide et impera i kako se kaže na latinskom da je ljudska glupost neuništiva.
Avatar
Postovi: 6781
Postovi: 6781
Pridružen/a: 06 lis 2011, 01:29
Lokacija: ~$
Podijelio/la zahvalu: 145 puta
Primio/la zahvalu: 58 puta
Spol: M
OS: Ovisi za sta
Pokusao sam, nije uspelo.
Avatar
Postovi: 7
Postovi: 7
Pridružen/a: 03 srp 2012, 19:50
Podijelio/la zahvalu: 0 puta
Primio/la zahvalu: 0 puta
Spol: M
OS: Ubuntu 12.04
Probaj ovo http://paulphilippov.com/articles/how_t ... ress_error
Ukratko:
Ugasi računalo, isključi sve USB uređaje i pričekaj par minuta.

Imam G15, i nisam imao tih problema, ali pošto ta tipkovnica ima u sebi 2 USB-a (i ekran) i koristi kao HUB zna biti nekad problema sa takvim stvarima.
Avatar
Postovi: 1246
Postovi: 1246
Pridružen/a: 22 vel 2012, 12:24
Lokacija: Split
Podijelio/la zahvalu: 84 puta
Primio/la zahvalu: 41 puta
Spol: M
OS: Arch bspwm/KDE
Uspeo sam. Eksterni hard disk je pravio problem, njemu sam zamenio port.
Hvala svima na odgovorima!
Avatar
Postovi: 7
Postovi: 7
Pridružen/a: 03 srp 2012, 19:50
Podijelio/la zahvalu: 0 puta
Primio/la zahvalu: 0 puta
Spol: M
OS: Ubuntu 12.04

Na mreži
Trenutno korisnika/ca: / i 1 gost.