Sada je: 16 lis 2019, 23:30.
Diskusije o hardveru i driverima pod Linuxom.

Moderator/ica: Moderatori/ce

kupio sam ovaj usb.ali kad pokusam instalirati drivere koji su na cd-u :

root@Tomislav-PC:/home/tomislav# cd '/home/tomislav/tv/64bit/IT9135_SRC'
root@Tomislav-PC:/home/tomislav/tv/64bit/IT9135_SRC# make clean
root@Tomislav-PC:/home/tomislav/tv/64bit/IT9135_SRC# make
make -C /lib/modules/3.2.0-34-generic/build SUBDIRS=/home/tomislav/tv/64bit/IT9135_SRC modules
make[1]: Ulazim u direktorij `/usr/src/linux-headers-3.2.0-34-generic'
CC [M] /home/tomislav/tv/64bit/IT9135_SRC/it9135-core.o
In file included from /home/tomislav/tv/64bit/IT9135_SRC/it9135-core.c:1:0:
/home/tomislav/tv/64bit/IT9135_SRC/it9135.h:12:28: fatal error: linux/smp_lock.h: Nema takve datoteke ili direktorija
compilation terminated.
make[2]: *** [/home/tomislav/tv/64bit/IT9135_SRC/it9135-core.o] Greška 1
make[1]: *** [_module_/home/tomislav/tv/64bit/IT9135_SRC] Greška 2
make[1]: Izlazim iz direktorija `/usr/src/linux-headers-3.2.0-34-generic'
make: *** [default] Greška 2
root@Tomislav-PC:/home/tomislav/tv/64bit/IT9135_SRC#

Sto da radim :shock:
#!/bin/bash
coffee=0

while [ `date +%H%M` -lt 0800 ]; do

coffee=$((coffee + 1))

done
exit
Postovi: 855
Postovi: 855
Pridružen/a: 21 lip 2012, 20:36
Lokacija: /home/donji_miholjac -> /home/varazdin
Podijelio/la zahvalu: 14 puta
Primio/la zahvalu: 19 puta
Spol: M
OS: Debian 10 Buster / KDE
Probaj prije make upisati: ./configure
Avatar
Site Admin
Postovi: 2076
Site Admin
Postovi: 2076
Pridružen/a: 07 pro 2007, 16:30
Lokacija: Zagreb
Podijelio/la zahvalu: 174 puta
Primio/la zahvalu: 278 puta
Spol: Ž
OS: ubuntu 12.04
bash: ./configure: Nema takve datoteke ili direktorija
#!/bin/bash
coffee=0

while [ `date +%H%M` -lt 0800 ]; do

coffee=$((coffee + 1))

done
exit
Postovi: 855
Postovi: 855
Pridružen/a: 21 lip 2012, 20:36
Lokacija: /home/donji_miholjac -> /home/varazdin
Podijelio/la zahvalu: 14 puta
Primio/la zahvalu: 19 puta
Spol: M
OS: Debian 10 Buster / KDE
A sto ti kaze readme file? Koje su upute za instaliranje?
Avatar
Site Admin
Postovi: 16087
Site Admin
Postovi: 16087
Pridružen/a: 03 tra 2008, 18:09
Lokacija: Svugdi me ima. Slavonija uglavnom.
Podijelio/la zahvalu: 503 puta
Primio/la zahvalu: 531 puta
Spol: M
OS: Mint 17 Cinnamon
evo : :pogled_dolje

ITEtech IT9135 DVB-T USB Linux TV Driver Installation Guide
2009/12/18
Copyright (C) 2007-2009 ITE Technologies, INC.

1. Release note
This software package release is version 9.12.18.1.
Driver component version information:
1. Firmware : v1_0_12_0
2. API : 2.0.20091116.0

The driver is for ITEtech 9135 based USB TV module and operates
on Linux platform.

This release supports x86 32bit and 64bit CPU families in Linux.

2. Revision history
Features added and bugs fixed in v9.12.18.1,
(1) First release.



3. File and folder descriptions

\32bit\IT9135_SRC.tgz ITE9135 USB device driver source code package for 32 bit CPU
\64bit\IT9135_SRC.tgz ITE9135 USB device driver source code package for 64 bit CPU

4. Feature descriptions
IT9135 Linux driver is implemented with the video for Linux (V4L) interface
that greatly simplifies software integration. It performed the tasks such as
initialization, channel bandwidth selection, channel scanning and acquisition,
, and PID filter setting. Users also have access to all the relevant
signal statistic information generated by the IC, post-Viterbi bit error
rate(BER), uncorrectable Reed-Solomon (RS) packet count, signal strength,
and signal quality indicator.

One sample program with source codes are included in the driver package.
The sample program demonstrate how to access the V4L and the device in
DVB-T mode.

For users who are not familiar with Linux & LinuxTV, please refer to 'User Guide Linux FC6-3' which
details package & player installation step-by-step.

5. Package Installation for Linux

a. Install driver with source code
Alternatively, you may compile and install the driver source code manually,

1) In the folder 'IT9135_SRC', type the following command to compile & install it9135 DVB-T driver dvb-usb-it9135.ko.
# make clean
# make
# make install

2) Plug in the device and check the message to make sure the driver is work normally.
# cat /var/log/messages

log messages:

dvb-usb: found a 'ITEtech USB2.0 DVB-T Recevier' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: ITEtech USB2.0 DVB-T Recevier successfully initialized and connected.

#lsmod|more

Module info:

Module Size Used by

dvb_usb_it9135 ----- 0
dvb_usb ----- 1 dvb_usb_it9135
dvb_core ----- 1 dvb_usb
dvb_pll ----- 1 dvb_usb

6. Driver uninstall
To remove ITE's driver, input
make remove

To delete .ko files, input
make clean

7. Remote Controller support
To enable IR Remote Controller, the configuration settings in EEPROM should be set properly
The IR type supported is NEC or RC-5, the configuration is set in EEPROM.
By default, The IR type for the Remote Controller shipped with 9135 USB dongle, is
consistent with EEPROM setting.

If the RC is acquired elsewhere, you should run ITE's EEPROMEdiotr in Windows to program the
IR type field properly.

RC key mapping table,
The RC key mapping table is stored in af35irtbl.bin.
A "Windows" tool IR_Editor.exe from Afa is available for users to customize the key mapping table.


8. Known problems & limitations
a.CPU architecture:
Currently only x86 architecture is supported.
b.USB support:
Currently only USB2.0 is supported.
c.Device VID/PID:
0x048D/0x9005; 0x048D/0x9006.
d.IR is supported and IRTable is named "af35irtbl.bin".
e.Officially supported distributions:
Linux Kernel - kernel 2.6.10 upward.

9. Future work
USB1.1 support.
#!/bin/bash
coffee=0

while [ `date +%H%M` -lt 0800 ]; do

coffee=$((coffee + 1))

done
exit
Postovi: 855
Postovi: 855
Pridružen/a: 21 lip 2012, 20:36
Lokacija: /home/donji_miholjac -> /home/varazdin
Podijelio/la zahvalu: 14 puta
Primio/la zahvalu: 19 puta
Spol: M
OS: Debian 10 Buster / KDE
pratim sve kako piše u readme al opet isto.probao sam nešto odavde https://help.ubuntu.com/community/DVB-T_(USB) al neradi
#!/bin/bash
coffee=0

while [ `date +%H%M` -lt 0800 ]; do

coffee=$((coffee + 1))

done
exit
Postovi: 855
Postovi: 855
Pridružen/a: 21 lip 2012, 20:36
Lokacija: /home/donji_miholjac -> /home/varazdin
Podijelio/la zahvalu: 14 puta
Primio/la zahvalu: 19 puta
Spol: M
OS: Debian 10 Buster / KDE
A jel ima noviji driver za skinuti s proizvodjaceve stranice?
Avatar
Site Admin
Postovi: 16087
Site Admin
Postovi: 16087
Pridružen/a: 03 tra 2008, 18:09
Lokacija: Svugdi me ima. Slavonija uglavnom.
Podijelio/la zahvalu: 503 puta
Primio/la zahvalu: 531 puta
Spol: M
OS: Mint 17 Cinnamon
ima samo za windows.i taj ima na cd-u :(
#!/bin/bash
coffee=0

while [ `date +%H%M` -lt 0800 ]; do

coffee=$((coffee + 1))

done
exit
Postovi: 855
Postovi: 855
Pridružen/a: 21 lip 2012, 20:36
Lokacija: /home/donji_miholjac -> /home/varazdin
Podijelio/la zahvalu: 14 puta
Primio/la zahvalu: 19 puta
Spol: M
OS: Debian 10 Buster / KDE
Prema ovome bi trebao u (a mozda i jos negdje)
Kod: Označi sve
/home/tomislav/tv/64bit/IT9135_SRC/it9135.h

promijeniti "linux/smp_lock.h" u "linux/smp.h"

A pogledaj i ovo. Cini mi se da je to tvoj driver.
Avatar
Postovi: 28
Postovi: 28
Pridružen/a: 03 kol 2009, 00:01
Lokacija: Barcelona/España
Podijelio/la zahvalu: 0 puta
Primio/la zahvalu: 1 puta
Spol: M
OS: arch KDE/kubuntu 17.10
fram je napisao/la:Prema ovome bi trebao u (a mozda i jos negdje)
Kod: Označi sve
/home/tomislav/tv/64bit/IT9135_SRC/it9135.h

promijeniti "linux/smp_lock.h" u "linux/smp.h"

A pogledaj i ovo. Cini mi se da je to tvoj driver.

bas to sad instaliram pa cu vidjeti
#!/bin/bash
coffee=0

while [ `date +%H%M` -lt 0800 ]; do

coffee=$((coffee + 1))

done
exit
Postovi: 855
Postovi: 855
Pridružen/a: 21 lip 2012, 20:36
Lokacija: /home/donji_miholjac -> /home/varazdin
Podijelio/la zahvalu: 14 puta
Primio/la zahvalu: 19 puta
Spol: M
OS: Debian 10 Buster / KDE

Na mreži
Trenutno korisnika/ca: / i 1 gost.