Problem s internetom

[sifu]

Pri insatalciji Ubunta 14.04 ne mogu ostvariti internet(žičano).Pokušava ali nemože uspostaviti.Na tom računalu koristim Windows 7 pro. 64 bit i sve radi savršeno.

Instalirao sam je napokon ali i dalje nemam internet a spojen sam žičano(Amis optika).

Konfiguracija računala:


- Operacijski sustav
Windows 7 Professional 64-bit SP1
Glavni procesor
AMD FX-6300
Vishera 32nm tehnologija
Radna memorija
8,00GB dvostruka-kanalna DDR3 @ 535MHz (7-7-7-19)
Matična ploča
ASRock N68-VS3 FX (CPUSocket)
Grafika
SyncMaster (1680x1050@60Hz)
1024MBATI AMD Radeon HD 6670 (MSI)
Pohrana
465GB Hitachi HDP725050GLA SCSI Disk Device (SATA)
Optički pogoni
HL-DT-ST DVDRAM GSA-H66N SCSI CdRom Device
PHILIPS SPD2514T SCSI CdRom Device
Zvuk
VIA High Definition Audio

In insatalciji Ubuntu 04.14 can not accomplish (wired) Internet .Pokušava but can not uspostaviti.Na that computer use Windows 7 December 64 bit and everything works perfectly.

I installed finally but still have no internet and I connected a wire (Amis optics).

Computer Configuration:


- Operating system
Windows 7 Professional 64-bit SP1
The main processor
AMD FX-6300
Vishera 32nm technology
Working memory
8,00GB dual-channel DDR3 @ 535MHz (7-7-7-19)
Motherboard
ASRock N68-VS3 FX (CPUSocket)
graphics
SyncMaster (1680x1050 @ 60Hz)
1024MBATI AMD Radeon HD 6670 (MSI)
Storage
465GB Hitachi HDP725050GLA SCSI Disk Device (SATA)
Optical Drives
HL-DT-ST DVDRAM GSA-H66N SCSI CdRom Device
PHILIPS SPD2514T SCSI CdRom Device
sound
VIA High Definition Audio

Edit by bertone

[JH-IM]

http://www.pcworld.com/article/2455972/ ... linux.html

Pogledaj ovaj link. I iskopiraj rezultate od:

Kod: Označi sve

ifconfig

Kod: Označi sve

lspci

Kod: Označi sve

sudo lshw

Kod: Označi sve

cat /etc/network/interfaces

Je li to 14.04 ili 14.04.1?

[sifu]

Microsoft Windows [Version 6.1.7601]
Autorska prava (c) 2009 Microsoft Corporation. Sva prava pridržana.

C:\Users\Milan>ifconfig
'ifconfig' is not recognized as an internal or external command,
operable program or batch file.

C:\Users\Milan>lspci
'lspci' is not recognized as an internal or external command,
operable program or batch file.

C:\Users\Milan>sudo lshw
'sudo' is not recognized as an internal or external command,
operable program or batch file.

C:\Users\Milan>cat /etc/network/interfaces
'cat' is not recognized as an internal or external command,
operable program or batch file.

C:\Users\Milan>

To je 14.04.1.

Ali nije mi jasno prije 2 mijeseca instalirao sam ubuntu 12.04 i sve je savršeno radilo.Jedino sam promijenio novi procesor AMD FX-6300 (6x3,5).Prije toga sam koristio AMD Phenom II X4 840(4x3.20).Ove komande sam isprobao preko cmd..

Hvala..

[Vl@do]

@sifu, komande upisuješ u terminal (Ubuntu, Aplikacije, terminal), a ispis lijepiš u "Code" na pr. ovako:

Kod: Označi sve

[vlado@localhost ~]$ lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6310]
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
00:15.2 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 2)
00:15.3 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 3)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
06:00.0 Ethernet controller: Qualcomm Atheros AR8152 v2.0 Fast Ethernet (rev c1)
07:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)

[calisto053]

@sifu - ako već zatražiš pomoć u vezi linuxa i dobiješ prijedloge kako to riješiti, daj se barem malo skoncentriraj i radi na linuxu

[sifu]

Oprosti novi sam u Linuxu,isprobao sam ga samo prije 2 mijeseca i svidio mi se.Budem sad probao pa pošaljem.

Hvala..

[sifu]

ifconfig

Kod: Označi sve

Link encap:Ethernet  HWaddr bc:5f:f4:08:05:6d  
          inet6 addr: fe80::be5f:f4ff:fe08:56d/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:2327 (2.3 KB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:167 errors:0 dropped:0 overruns:0 frame:0
          TX packets:167 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:11937 (11.9 KB)  TX bytes:11937 (11.9 KB)

2. lspci

Kod: Označi sve

- 00:00.0 RAM memory: NVIDIA Corporation MCP61 Host Bridge (rev a1)
00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3)
00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3)
00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Turks XT [Radeon HD 6670/7670]
02:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Turks/Whistler HDMI Audio [Radeon HD 6000 Series]

3. cat/etc/network/interface

Kod: Označi sve

- bash: cat/etc/network/interface: No such file or directory

Još jednom da ponovim ono što je Vl@do već rekao, ispis naredbi se stavlja u code (imaš na vrhu, iznad okvira za unos teksta gumb "Code", klikneš ga i onda između uglatih zagrada zalijepiš ispis).

Edit by bertone!

[shrike]

Cat je naredba i treba bit razmak. Probaj ovo izvršiti: "sudo dhclient eth0" to je nula na kraju i jasno, bez razmaka. Zatim probaj na net kada to izvrsis. Ako ne radi, eth0 zamijeni sa eth1.

[sifu]

Probao sam sudo dhclient eth0 i ništa..

[JH-IM]

Probao sam sudo dhclient eth0 i ništa..

Iskopiraj još rezultat od:

Kod: Označi sve

sudo lshw

Kod: Označi sve

cat /etc/network/interfaces

Kako ti je napisao shrike, poslije cat ide razmak.