Nema zvuka - lsmod
Module Size Used by
iptable_filter 1790 0
ip_tables 7706 1 iptable_filter
x_tables 8327 1 ip_tables
nls_utf8 908 0
nls_cp437 4489 0
vfat 6534 0
fat 34776 1 vfat
usb_storage 30797 0
cpufreq_conservative 4018 0
cpufreq_powersave 602 0
cpufreq_userspace 1444 0
cpufreq_stats 1940 0
parport_pc 15799 0
ppdev 4058 0
lp 5570 0
parport 22554 3 parport_pc,ppdev,lp
sco 5885 2
bridge 32883 0
stp 996 1 bridge
rfcomm 25107 0
bnep 7384 2
l2cap 21709 6 rfcomm,bnep
crc16 1027 1 l2cap
bluetooth 36251 6 sco,rfcomm,bnep,l2cap
rfkill 10196 3 bluetooth
vboxnetadp 5118 0
vboxnetflt 12633 0
vboxdrv 126614 2 vboxnetadp,vboxnetflt
binfmt_misc 4875 1
fuse 44052 3
loop 9729 0
snd_hda_codec_atihdmi 1687 1
snd_intel8x0 19595 1
snd_ac97_codec 79148 1 snd_intel8x0
ac97_bus 710 1 snd_ac97_codec
snd_hda_intel 16791 0
snd_hda_codec 46002 2 snd_hda_codec_atihdmi,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
snd_pcm 47226 4 snd_intel8x0,snd_ac97_codec,snd_hda_intel,snd_hda_codec
snd_seq 35327 0
snd_timer 12258 2 snd_pcm,snd_seq
snd_seq_device 3673 1 snd_seq
snd 34387 11 snd_intel8x0,snd_ac97_codec,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
i2c_nforce2 4464 0
i2c_core 12751 1 i2c_nforce2
soundcore 3450 1 snd
k8temp 2551 0
fglrx 2374720 111
snd_page_alloc 4977 3 snd_intel8x0,snd_hda_intel,snd_pcm
evdev 5609 18
pcspkr 1207 0
psmouse 44777 0
button 3598 1 fglrx
processor 26259 0
serio_raw 2916 0
ext3 93944 1
jbd 31965 1 ext3
mbcache 3762 1 ext3
hid_logitech 4974 0
ff_memless 3008 1 hid_logitech
usbhid 27872 1 hid_logitech
hid 50841 2 hid_logitech,usbhid
sg 19905 0
sd_mod 25937 5
crc_t10dif 1012 1 sd_mod
sr_mod 10770 0
cdrom 26487 1 sr_mod
ata_generic 2067 0
ohci_hcd 16883 0
fan 2586 0
pata_amd 6625 2
sata_nv 15362 1
libata 115513 3 ata_generic,pata_amd,sata_nv
thermal 9206 0
thermal_sys 9378 3 processor,fan,thermal
ehci_hcd 28453 0
skge 30098 0
usbcore 98541 5 usb_storage,usbhid,ohci_hcd,ehci_hcd
nls_base 4541 5 nls_utf8,nls_cp437,vfat,fat,usbcore
scsi_mod 104613 5 usb_storage,sg,sd_mod,sr_mod,libata
forcedeth 40717 0
Nema zvuka - dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-34squeeze1) (
dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed May 18 07:08:50 UTC 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.2 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 007FF00000 mask FFFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 377ca000 - 37fef995
[ 0.000000] Allocated new RAMDISK: 00100000 - 00925995
[ 0.000000] Move RAMDISK from 00000000377ca000 - 0000000037fef994 to 00100000 - 00925994
[ 0.000000] ACPI: RSDP 000f8160 00014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 7fee3040 00030 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 7fee30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 7fee3180 06027 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 7fee0000 00040
[ 0.000000] ACPI: MCFG 7fee92c0 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 7fee9200 00072 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1162MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c8bb4] TEXT DATA BSS ==> [0001000000 - 00014c8bb4]
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
[ 0.000000] #5 [00014c9000 - 00014cf0a4] BRK ==> [00014c9000 - 00014cf0a4]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000100000 - 0000925995] NEW RAMDISK ==> [0000100000 - 0000925995]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00f4210] f4210
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007fee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fee0
[ 0.000000] On node 0 totalpages: 523887
[ 0.000000] free_area_init_node: node 0, pgdat c13b08a0, node_mem_map c14d1200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2326 pages used for memmap
[ 0.000000] HighMem zone: 295372 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:60100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34328 r0 d23016 u2097152
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519793
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=d4866de0-753f-4eef-8dc6-4e3ca89b320d ro quiet nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0007fee0)
[ 0.000000] Memory: 2063892k/2096000k available (2503k kernel code, 30632k reserved, 1313k data, 380k init, 1190792k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bb000 - 0xc141a000 ( 380 kB)
[ 0.000000] .data : 0xc1271e61 - 0xc13ba4c0 (1313 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1271e61 (2503 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2500.344 MHz processor.
[ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.68 BogoMIPS (lpj=10001376)
[ 0.008016] Security Framework initialized
[ 0.008021] SELinux: Disabled at boot.
[ 0.008026] Mount-cache hash table entries: 512
[ 0.008118] Initializing cgroup subsys ns
[ 0.008121] Initializing cgroup subsys cpuacct
[ 0.008124] Initializing cgroup subsys devices
[ 0.008126] Initializing cgroup subsys freezer
[ 0.008128] Initializing cgroup subsys net_cls
[ 0.008143] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008146] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.008147] CPU: Physical Processor ID: 0
[ 0.008149] CPU: Processor Core ID: 0
[ 0.008152] mce: CPU supports 5 MCE banks
[ 0.008163] Performance Events: AMD PMU driver.
[ 0.008168] ... version: 0
[ 0.008169] ... bit width: 48
[ 0.008170] ... generic registers: 4
[ 0.008172] ... value mask: 0000ffffffffffff
[ 0.008174] ... max period: 00007fffffffffff
[ 0.008175] ... fixed-purpose events: 0
[ 0.008177] ... event mask: 000000000000000f
[ 0.008180] Checking 'hlt' instruction... OK.
[ 0.024724] ACPI: Core revision 20090903
[ 0.031872] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.032244] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.071928] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.012000] Initializing CPU#1
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 1
[ 0.156047] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01
[ 0.156096] Brought up 2 CPUs
[ 0.156098] Total of 2 processors activated (10002.43 BogoMIPS).
[ 0.156364] CPU0 attaching sched-domain:
[ 0.156368] domain 0: span 0-1 level MC
[ 0.156370] groups: 0 1
[ 0.156375] CPU1 attaching sched-domain:
[ 0.156377] domain 0: span 0-1 level MC
[ 0.156379] groups: 1 0
[ 0.156431] devtmpfs: initialized
[ 0.156431] regulator: core version 0.5
[ 0.156431] NET: Registered protocol family 16
[ 0.156431] ACPI: bus type pci registered
[ 0.156431] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.156431] PCI: MCFG area at e0000000 reserved in E820
[ 0.156431] PCI: Using MMCONFIG for extended config space
[ 0.156431] PCI: Using configuration type 1 for base access
[ 0.156431] bio: create slab <bio-0> at 0
[ 0.156545] ACPI: EC: Look up EC in DSDT
[ 0.163503] ACPI: Interpreter enabled
[ 0.163505] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.163527] ACPI: Using IOAPIC for interrupt routing
[ 0.169260] ACPI: No dock devices found.
[ 0.170100] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.170188] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.170203] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc1f]
[ 0.170211] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
[ 0.170214] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f]
[ 0.170223] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.170226] pci 0000:00:01.1: PME# disabled
[ 0.170244] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
[ 0.170259] pci 0000:00:02.0: supports D1 D2
[ 0.170261] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170263] pci 0000:00:02.0: PME# disabled
[ 0.170280] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff]
[ 0.170298] pci 0000:00:02.1: supports D1 D2
[ 0.170300] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170303] pci 0000:00:02.1: PME# disabled
[ 0.170322] pci 0000:00:04.0: reg 10 io port: [0xf000-0xf0ff]
[ 0.170325] pci 0000:00:04.0: reg 14 io port: [0xec00-0xecff]
[ 0.170329] pci 0000:00:04.0: reg 18 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.170341] pci 0000:00:04.0: supports D1 D2
[ 0.170360] pci 0000:00:06.0: reg 20 io port: [0xe800-0xe80f]
[ 0.170381] pci 0000:00:08.0: reg 10 io port: [0x9e0-0x9e7]
[ 0.170384] pci 0000:00:08.0: reg 14 io port: [0xbe0-0xbe3]
[ 0.170388] pci 0000:00:08.0: reg 18 io port: [0x960-0x967]
[ 0.170391] pci 0000:00:08.0: reg 1c io port: [0xb60-0xb63]
[ 0.170395] pci 0000:00:08.0: reg 20 io port: [0xd400-0xd40f]
[ 0.170398] pci 0000:00:08.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff]
[ 0.170427] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.170430] pci 0000:00:0a.0: reg 14 io port: [0xd000-0xd007]
[ 0.170444] pci 0000:00:0a.0: supports D1 D2
[ 0.170446] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170448] pci 0000:00:0a.0: PME# disabled
[ 0.170475] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170477] pci 0000:00:0b.0: PME# disabled
[ 0.170504] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170507] pci 0000:00:0c.0: PME# disabled
[ 0.170534] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170536] pci 0000:00:0d.0: PME# disabled
[ 0.170563] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170565] pci 0000:00:0e.0: PME# disabled
[ 0.170657] pci 0000:01:0a.0: reg 10 32bit mmio: [0xfdefc000-0xfdefffff]
[ 0.170662] pci 0000:01:0a.0: reg 14 io port: [0xcc00-0xccff]
[ 0.170677] pci 0000:01:0a.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.170691] pci 0000:01:0a.0: supports D1 D2
[ 0.170693] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170696] pci 0000:01:0a.0: PME# disabled
[ 0.170719] pci 0000:00:09.0: transparent bridge
[ 0.170722] pci 0000:00:09.0: bridge io port: [0xc000-0xcfff]
[ 0.170725] pci 0000:00:09.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.170728] pci 0000:00:09.0: bridge 32bit mmio pref: [0xfdf00000-0xfdffffff]
[ 0.170756] pci 0000:00:0b.0: bridge io port: [0xb000-0xbfff]
[ 0.170759] pci 0000:00:0b.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.170763] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff]
[ 0.170791] pci 0000:00:0c.0: bridge io port: [0xa000-0xafff]
[ 0.170793] pci 0000:00:0c.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff]
[ 0.170797] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff]
[ 0.170824] pci 0000:00:0d.0: bridge io port: [0x9000-0x9fff]
[ 0.170827] pci 0000:00:0d.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff]
[ 0.170830] pci 0000:00:0d.0: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff]
[ 0.170852] pci 0000:05:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.170859] pci 0000:05:00.0: reg 18 64bit mmio: [0xfd7c0000-0xfd7dffff]
[ 0.170863] pci 0000:05:00.0: reg 20 io port: [0x8c00-0x8cff]
[ 0.170870] pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.170883] pci 0000:05:00.0: supports D1 D2
[ 0.170909] pci 0000:05:00.1: reg 10 64bit mmio: [0xfd7fc000-0xfd7fffff]
[ 0.170933] pci 0000:05:00.1: supports D1 D2
[ 0.176047] pci 0000:00:0e.0: bridge io port: [0x8000-0x8fff]
[ 0.176049] pci 0000:00:0e.0: bridge 32bit mmio: [0xfd700000-0xfd7fffff]
[ 0.176053] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.176061] pci_bus 0000:00: on NUMA node 0
[ 0.176065] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.176227] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.221001] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.221113] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.221225] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.221335] ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.221449] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.221560] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.221674] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.221785] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[ 0.221899] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.222010] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.222122] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.222236] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.222347] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.222469] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.222589] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.222710] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.222837] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.222960] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.223082] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.223204] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.223281] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.223408] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.223537] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.223665] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.223793] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[ 0.223922] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 0.224058] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.224186] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.224314] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.224450] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 0.224586] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.224721] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.224811] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.224813] vgaarb: loaded
[ 0.224827] PCI: Using ACPI for IRQ routing
[ 0.225074] pnp: PnP ACPI init
[ 0.225084] ACPI: bus type pnp registered
[ 0.229348] pnp: PnP ACPI: found 10 devices
[ 0.229349] ACPI: ACPI bus type pnp unregistered
[ 0.229352] PnPBIOS: Disabled by ACPI PNP
[ 0.229361] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.229364] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.229366] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.229369] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.229372] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.229375] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.229380] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.229383] system 00:02: ioport range 0x200-0x27f has been reserved
[ 0.229385] system 00:02: ioport range 0x290-0x30f has been reserved
[ 0.229388] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.229394] system 00:08: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.229399] system 00:09: iomem range 0xf0000-0xf3fff could not be reserved
[ 0.229402] system 00:09: iomem range 0xf4000-0xf7fff could not be reserved
[ 0.229405] system 00:09: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.229408] system 00:09: iomem range 0xfc000-0xfffff could not be reserved
[ 0.229410] system 00:09: iomem range 0x7fee0000-0x7fefffff could not be reserved
[ 0.229413] system 00:09: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.229416] system 00:09: iomem range 0x0-0x9ffff could not be reserved
[ 0.229419] system 00:09: iomem range 0x100000-0x7fedffff could not be reserved
[ 0.229422] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.229425] system 00:09: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.229428] system 00:09: iomem range 0xfefff000-0xfeffffff has been reserved
[ 0.229431] system 00:09: iomem range 0xfff80000-0xfff80fff has been reserved
[ 0.229434] system 00:09: iomem range 0xfff90000-0xfffbffff has been reserved
[ 0.229437] system 00:09: iomem range 0xfffed000-0xfffeffff has been reserved
[ 0.264051] Switching to clocksource acpi_pm
[ 0.264064] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 0.264066] pci 0000:00:09.0: IO window: 0xc000-0xcfff
[ 0.264069] pci 0000:00:09.0: MEM window: 0xfde00000-0xfdefffff
[ 0.264073] pci 0000:00:09.0: PREFETCH window: 0xfdf00000-0xfdffffff
[ 0.264076] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
[ 0.264078] pci 0000:00:0b.0: IO window: 0xb000-0xbfff
[ 0.264081] pci 0000:00:0b.0: MEM window: 0xfdd00000-0xfddfffff
[ 0.264084] pci 0000:00:0b.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
[ 0.264088] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
[ 0.264090] pci 0000:00:0c.0: IO window: 0xa000-0xafff
[ 0.264093] pci 0000:00:0c.0: MEM window: 0xfdb00000-0xfdbfffff
[ 0.264095] pci 0000:00:0c.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff
[ 0.264099] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
[ 0.264101] pci 0000:00:0d.0: IO window: 0x9000-0x9fff
[ 0.264104] pci 0000:00:0d.0: MEM window: 0xfd900000-0xfd9fffff
[ 0.264107] pci 0000:00:0d.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff
[ 0.264111] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05
[ 0.264113] pci 0000:00:0e.0: IO window: 0x8000-0x8fff
[ 0.264116] pci 0000:00:0e.0: MEM window: 0xfd700000-0xfd7fffff
[ 0.264119] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.264126] pci 0000:00:09.0: setting latency timer to 64
[ 0.264131] pci 0000:00:0b.0: setting latency timer to 64
[ 0.264135] pci 0000:00:0c.0: setting latency timer to 64
[ 0.264139] pci 0000:00:0d.0: setting latency timer to 64
[ 0.264143] pci 0000:00:0e.0: setting latency timer to 64
[ 0.264147] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.264149] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.264151] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.264154] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.264156] pci_bus 0000:01: resource 2 pref mem [0xfdf00000-0xfdffffff]
[ 0.264159] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.264161] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.264163] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 0.264166] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
[ 0.264168] pci_bus 0000:02: resource 2 pref mem [0xfdc00000-0xfdcfffff]
[ 0.264171] pci_bus 0000:03: resource 0 io: [0xa000-0xafff]
[ 0.264173] pci_bus 0000:03: resource 1 mem: [0xfdb00000-0xfdbfffff]
[ 0.264176] pci_bus 0000:03: resource 2 pref mem [0xfda00000-0xfdafffff]
[ 0.264178] pci_bus 0000:04: resource 0 io: [0x9000-0x9fff]
[ 0.264181] pci_bus 0000:04: resource 1 mem: [0xfd900000-0xfd9fffff]
[ 0.264183] pci_bus 0000:04: resource 2 pref mem [0xfd800000-0xfd8fffff]
[ 0.264186] pci_bus 0000:05: resource 0 io: [0x8000-0x8fff]
[ 0.264188] pci_bus 0000:05: resource 1 mem: [0xfd700000-0xfd7fffff]
[ 0.264190] pci_bus 0000:05: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.264219] NET: Registered protocol family 2
[ 0.264291] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.264576] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.265100] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.265382] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.265385] TCP reno registered
[ 0.265457] NET: Registered protocol family 1
[ 1.880017] pci 0000:00:02.1: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 1.880061] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.880066] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 1.880072] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.880076] pci 0000:00:0b.0: Linking AER extended capability
[ 1.880108] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.880113] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 1.880119] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.880122] pci 0000:00:0c.0: Linking AER extended capability
[ 1.880157] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.880161] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 1.880168] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.880170] pci 0000:00:0d.0: Linking AER extended capability
[ 1.880209] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.880213] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 1.880220] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.880223] pci 0000:00:0e.0: Linking AER extended capability
[ 1.880231] pci 0000:05:00.0: Boot video device
[ 1.880275] Unpacking initramfs...
[ 2.063012] Freeing initrd memory: 8342k freed
[ 2.067451] audit: initializing netlink socket (disabled)
[ 2.067461] type=2000 audit(1308566713.065:1): initialized
[ 2.070285] highmem bounce pool size: 64 pages
[ 2.070289] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.071462] VFS: Disk quotas dquot_6.5.2
[ 2.071511] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.071573] msgmni has been set to 1723
[ 2.071807] alg: No test for stdrng (krng)
[ 2.071853] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.071855] io scheduler noop registered
[ 2.071857] io scheduler anticipatory registered
[ 2.071859] io scheduler deadline registered
[ 2.071887] io scheduler cfq registered (default)
[ 2.071968] pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X
[ 2.071972] pcieport 0000:00:0b.0: setting latency timer to 64
[ 2.072038] pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X
[ 2.072042] pcieport 0000:00:0c.0: setting latency timer to 64
[ 2.072093] pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X
[ 2.072097] pcieport 0000:00:0d.0: setting latency timer to 64
[ 2.072151] pcieport 0000:00:0e.0: irq 27 for MSI/MSI-X
[ 2.072154] pcieport 0000:00:0e.0: setting latency timer to 64
[ 2.072257] isapnp: Scanning for PnP cards...
[ 2.424934] isapnp: No Plug & Play device found
[ 2.425986] Linux agpgart interface v0.103
[ 2.426174] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.426433] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[ 2.426435] PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 2.429150] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.429162] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.429226] mice: PS/2 mouse device common for all mice
[ 2.429269] rtc_cmos 00:04: RTC can wake from S4
[ 2.429302] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.429324] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 2.429333] cpuidle: using governor ladder
[ 2.429335] cpuidle: using governor menu
[ 2.429339] No iBFT detected.
[ 2.429635] TCP cubic registered
[ 2.429749] NET: Registered protocol family 10
[ 2.430387] Mobile IPv6
[ 2.430389] NET: Registered protocol family 17
[ 2.430401] Using IPI No-Shortcut mode
[ 2.430456] PM: Resume from disk failed.
[ 2.430464] registered taskstats version 1
[ 2.430690] rtc_cmos 00:04: setting system clock to 2011-06-20 10:45:13 UTC (1308566713)
[ 2.430716] Initalizing network drop monitor service
[ 2.430736] Freeing unused kernel memory: 380k freed
[ 2.430942] Write protecting the kernel text: 2504k
[ 2.430965] Write protecting the kernel read-only data: 908k
[ 2.444770] udev[56]: starting version 164
[ 2.489627] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 2.489870] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 2.489879] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 2.489883] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 2.489913] nv_probe: set workaround bit for reversed mac addr
[ 2.534058] SCSI subsystem initialized
[ 2.545033] usbcore: registered new interface driver usbfs
[ 2.545140] usbcore: registered new interface driver hub
[ 2.545258] usbcore: registered new device driver usb
[ 2.546933] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 2.546942] skge 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[ 2.546975] skge 1.13 addr 0xfdefc000 irq 18 chip Yukon-Lite rev 9
[ 2.547521] skge eth0: addr 00:01:29:d6:90:f5
[ 2.550906] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.553718] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.553724] ACPI: Thermal Zone [THRM] (27 C)
[ 2.569512] libata version 3.00 loaded.
[ 2.576089] fan PNP0C0B:00: registered as cooling_device0
[ 2.576095] ACPI: Fan [FAN] (on)
[ 3.009987] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x3f1 @ 1, addr 00:01:29:d6:91:22
[ 3.009991] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[ 3.010252] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 3.010262] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 3.010279] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 3.010282] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 3.010303] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 3.010328] ehci_hcd 0000:00:02.1: debug port 1
[ 3.010333] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 3.010346] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfeb00000
[ 3.024015] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 3.024034] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.024036] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.024038] usb usb1: Product: EHCI Host Controller
[ 3.024040] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 3.024042] usb usb1: SerialNumber: 0000:00:02.1
[ 3.024118] usb usb1: configuration #1 chosen from 1 choice
[ 3.024147] hub 1-0:1.0: USB hub found
[ 3.024154] hub 1-0:1.0: 10 ports detected
[ 3.024208] pata_amd 0000:00:06.0: version 0.4.1
[ 3.024249] pata_amd 0000:00:06.0: setting latency timer to 64
[ 3.024384] scsi0 : pata_amd
[ 3.024465] scsi1 : pata_amd
[ 3.024997] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe800 irq 14
[ 3.024999] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe808 irq 15
[ 3.025057] sata_nv 0000:00:08.0: version 3.5
[ 3.025313] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
[ 3.025321] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 21 (level, low) -> IRQ 21
[ 3.025359] sata_nv 0000:00:08.0: setting latency timer to 64
[ 3.025403] scsi2 : sata_nv
[ 3.025449] scsi3 : sata_nv
[ 3.025571] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xd400 irq 21
[ 3.025574] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xd408 irq 21
[ 3.053404] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.053662] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 3.053671] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[ 3.053685] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 3.053688] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 3.053700] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 3.053723] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
[ 3.110021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.110024] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.110026] usb usb2: Product: OHCI Host Controller
[ 3.110028] usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 3.110030] usb usb2: SerialNumber: 0000:00:02.0
[ 3.110102] usb usb2: configuration #1 chosen from 1 choice
[ 3.110130] hub 2-0:1.0: USB hub found
[ 3.110138] hub 2-0:1.0: 10 ports detected
[ 3.188432] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[ 3.188436] ata1.00: 160086528 sectors, multi 16: LBA
[ 3.188456] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7000000) ACPI=0x7f01f (15:600:0x13)
[ 3.208339] ata1.00: configured for UDMA/133
[ 3.208459] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
[ 3.368328] ata2.00: ATAPI: DVDR PX-750A, 1.02, max UDMA/66
[ 3.368345] ata2: nv_mode_filter: 0x1f39f&0x739f->0x739f, BIOS=0x0 (0xc7000000) ACPI=0x39f (120:600:0x12)
[ 3.384298] ata2.00: configured for UDMA/33
[ 3.385877] scsi 1:0:0:0: CD-ROM PLEXTOR DVDR PX-750A 1.02 PQ: 0 ANSI: 5
[ 3.492027] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.541205] ata3.00: ATA-7: ST3320820AS, 3.AAK, max UDMA/133
[ 3.541207] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.607850] ata3.00: configured for UDMA/133
[ 3.607930] scsi 2:0:0:0: Direct-Access ATA ST3320820AS 3.AA PQ: 0 ANSI: 5
[ 3.636023] usb 2-5: new low speed USB device using ohci_hcd and address 2
[ 3.850037] usb 2-5: New USB device found, idVendor=046d, idProduct=c512
[ 3.850039] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.850041] usb 2-5: Product: USB Receiver
[ 3.850043] usb 2-5: Manufacturer: Logitech
[ 3.850096] usb 2-5: configuration #1 chosen from 1 choice
[ 3.916027] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.929205] sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
[ 3.929295] sd 0:0:0:0: [sda] Write Protect is off
[ 3.929298] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.929334] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.929519] sda:sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.932581] Uniform CD-ROM driver Revision: 3.20
[ 3.932653] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.932718] sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.932755] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.932757] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.932774] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.932976] sdb: sda1 sda2 < sdb1 sdb2 < sdb5 >
[ 3.956753] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 3.966845] sda5 >
[ 3.967095] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.972920] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.973287] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.973372] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 4.157027] usb 2-6: new low speed USB device using ohci_hcd and address 3
[ 4.394040] usb 2-6: New USB device found, idVendor=046d, idProduct=c30e
[ 4.394044] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.394047] usb 2-6: Product: HID compliant keyboard
[ 4.394048] usb 2-6: Manufacturer: Logitech
[ 4.394128] usb 2-6: configuration #1 chosen from 1 choice
[ 4.410130] usbcore: registered new interface driver hiddev
[ 4.423272] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input0
[ 4.423321] generic-usb 0003:046D:C30E.0003: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:02.0-6/input0
[ 4.450115] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.1/input/input1
[ 4.450140] generic-usb 0003:046D:C30E.0004: input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:02.0-6/input1
[ 4.450155] usbcore: registered new interface driver usbhid
[ 4.450157] usbhid: v2.6:USB HID core driver
[ 4.458290] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input2
[ 4.458338] logitech 0003:046D:C512.0001: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-5/input0
[ 4.469482] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.1/input/input3
[ 4.469525] logitech 0003:046D:C512.0002: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-5/input1
[ 4.576792] PM: Starting manual resume from disk
[ 4.576796] PM: Resume from partition 8:5
[ 4.576797] PM: Checking hibernation image.
[ 4.598191] PM: Error -22 checking image file
[ 4.598193] PM: Resume from disk failed.
[ 4.641680] kjournald starting. Commit interval 5 seconds
[ 4.641698] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.310658] udev[382]: starting version 164
[ 6.725637] processor LNXCPU:00: registered as cooling_device1
[ 6.725817] processor LNXCPU:01: registered as cooling_device2
[ 6.822582] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 6.822590] ACPI: Power Button [PWRB]
[ 6.822690] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 6.822694] ACPI: Power Button [PWRF]
[ 7.010571] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 7.484498] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 7.484502] Disabling lock debugging due to kernel taint
[ 7.604824] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
[ 7.604888] [fglrx] vendor: 1002 device: 68f9 count: 1
[ 7.605191] [fglrx] ioport: bar 4, base 0x8c00, size: 0x100
[ 7.605207] pci 0000:05:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[ 7.605212] pci 0000:05:00.0: setting latency timer to 64
[ 7.605483] [fglrx] Kernel PAT support is enabled
[ 7.605502] [fglrx] module loaded - fglrx 8.83.6 [Mar 8 2011] with 1 minors
[ 7.688539] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 7.688555] i2c i2c-1: nForce2 SMBus adapter at 0x1c40
[ 8.033706] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 8.033715] HDA Intel 0000:05:00.1: PCI INT B -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 8.033747] HDA Intel 0000:05:00.1: setting latency timer to 64
[ 8.135673] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23
[ 8.135678] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 23 (level, low) -> IRQ 23
[ 8.135702] Intel ICH 0000:00:04.0: setting latency timer to 64
[ 8.456018] intel8x0_measure_ac97_clock: measured 54744 usecs (2688 samples)
[ 8.456021] intel8x0: clocking to 46923
[ 9.619006] Adding 3288056k swap on /dev/sda5. Priority:-1 extents:1 across:3288056k
[ 9.898146] EXT3 FS on sda1, internal journal
[ 9.998392] loop: module loaded
[ 10.337433] fuse init (API version 7.13)
[ 11.908474] skge eth0: enabling interface
[ 11.911674] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.651051] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 13.651054] vboxdrv: Successfully done.
[ 13.651056] vboxdrv: Found 2 processor cores.
[ 13.651311] vboxdrv: fAsync=1 offMin=0x398bcf offMax=0x398bcf
[ 13.651352] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 13.651354] vboxdrv: Successfully loaded version 3.2.10_OSE (interface 0x00140001).
[ 13.718474] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
[ 13.718628] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.000949] Bluetooth: Core ver 2.15
[ 18.001017] NET: Registered protocol family 31
[ 18.001018] Bluetooth: HCI device and connection manager initialized
[ 18.001021] Bluetooth: HCI socket layer initialized
[ 18.140703] Bluetooth: L2CAP ver 2.14
[ 18.140706] Bluetooth: L2CAP socket layer initialized
[ 18.309697] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.309699] Bluetooth: BNEP filters: protocol multicast
[ 18.315079] Bluetooth: RFCOMM TTY layer initialized
[ 18.315083] Bluetooth: RFCOMM socket layer initialized
[ 18.315084] Bluetooth: RFCOMM ver 1.11
[ 18.351174] Bridge firewalling registered
[ 18.464429] Bluetooth: SCO (Voice Link) ver 0.6
[ 18.464432] Bluetooth: SCO socket layer initialized
[ 18.850088] fglrx_pci 0000:05:00.0: irq 28 for MSI/MSI-X
[ 18.850777] [fglrx] Firegl kernel thread PID: 1390
[ 18.850868] [fglrx] Firegl kernel thread PID: 1391
[ 18.850929] [fglrx] Firegl kernel thread PID: 1392
[ 18.851154] [fglrx] IRQ 28 Enabled
[ 19.252394] [fglrx] Gart USWC size:632 M.
[ 19.252398] [fglrx] Gart cacheable size:249 M.
[ 19.252403] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 19.252406] [fglrx] Reserved FB block: Unshared offset:fb03000, size:1fd000
[ 19.252408] [fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000
[ 19.400707] lp: driver loaded but no devices found
[ 19.449868] ppdev: user-space parallel port driver
[ 24.261017] eth0: no IPv6 routers present
[ 25.862028] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00)
[ 25.862041] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 25.862042] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 2633.832023] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 2633.978010] usb 1-3: New USB device found, idVendor=0bb4, idProduct=0c87
[ 2633.978014] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2633.978017] usb 1-3: Product: Android Phone
[ 2633.978019] usb 1-3: Manufacturer: HTC
[ 2633.978021] usb 1-3: SerialNumber: SH0CCPL09012
[ 2633.978108] usb 1-3: configuration #1 chosen from 1 choice
[ 2634.022699] Initializing USB Mass Storage driver...
[ 2634.022800] scsi4 : SCSI emulation for USB Mass Storage devices
[ 2634.022877] usbcore: registered new interface driver usb-storage
[ 2634.022880] USB Mass Storage support registered.
[ 2634.024064] usb-storage: device found at 4
[ 2634.024066] usb-storage: waiting for device to settle before scanning
[ 2639.025192] usb-storage: device scan complete
[ 2639.027153] scsi 4:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2
[ 2639.027637] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 2639.033159] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 2640.939399] sd 4:0:0:0: [sdc] 7698432 512-byte logical blocks: (3.94 GB/3.67 GiB)
[ 2640.941399] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 2640.947400] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 2640.947404] sdc: sdc1 sdc2
[ 2641.467725] kjournald starting. Commit interval 5 seconds
[ 2641.594143] EXT3 FS on sdc2, internal journal
[ 2641.594147] EXT3-fs: recovery complete.
[ 2641.721278] EXT3-fs: mounted filesystem with ordered data mode.
[ 2642.243599] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 2681.944416] usb 1-3: USB disconnect, address 4
[ 6609.044025] usb 1-3: new high speed USB device using ehci_hcd and address 5
[ 6609.189969] usb 1-3: New USB device found, idVendor=0bb4, idProduct=0c87
[ 6609.189973] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6609.189975] usb 1-3: Product: Android Phone
[ 6609.189977] usb 1-3: Manufacturer: HTC
[ 6609.189979] usb 1-3: SerialNumber: SH0CCPL09012
[ 6609.190067] usb 1-3: configuration #1 chosen from 1 choice
[ 6609.191490] scsi5 : SCSI emulation for USB Mass Storage devices
[ 6609.191667] usb-storage: device found at 5
[ 6609.191669] usb-storage: waiting for device to settle before scanning
[ 6614.189132] usb-storage: device scan complete
[ 6614.191143] scsi 5:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2
[ 6614.191925] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 6614.198925] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 6615.942114] sd 5:0:0:0: [sdc] 7698432 512-byte logical blocks: (3.94 GB/3.67 GiB)
[ 6615.943981] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 6615.949984] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 6615.949987] sdc: sdc1 sdc2
[ 6616.530909] kjournald starting. Commit interval 5 seconds
[ 6616.532854] EXT3 FS on sdc2, internal journal
[ 6616.532859] EXT3-fs: mounted filesystem with ordered data mode.
[ 6616.910003] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 6641.685380] usb 1-3: USB disconnect, address 5
[ 6646.676024] usb 1-3: new high speed USB device using ehci_hcd and address 6
[ 6646.821628] usb 1-3: New USB device found, idVendor=0bb4, idProduct=0c87
[ 6646.821631] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6646.821634] usb 1-3: Product: Android Phone
[ 6646.821636] usb 1-3: Manufacturer: HTC
[ 6646.821637] usb 1-3: SerialNumber: SH0CCPL09012
[ 6646.821725] usb 1-3: configuration #1 chosen from 1 choice
[ 6646.823159] scsi6 : SCSI emulation for USB Mass Storage devices
[ 6646.823332] usb-storage: device found at 6
[ 6646.823334] usb-storage: waiting for device to settle before scanning
[ 6648.794404] usb 1-3: USB disconnect, address 6
[ 6979.932018] usb 1-3: new high speed USB device using ehci_hcd and address 7
[ 6980.077876] usb 1-3: New USB device found, idVendor=0bb4, idProduct=0c87
[ 6980.077880] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6980.077882] usb 1-3: Product: Android Phone
[ 6980.077884] usb 1-3: Manufacturer: HTC
[ 6980.077886] usb 1-3: SerialNumber: SH0CCPL09012
[ 6980.077974] usb 1-3: configuration #1 chosen from 1 choice
[ 6980.079110] scsi7 : SCSI emulation for USB Mass Storage devices
[ 6980.079210] usb-storage: device found at 7
[ 6980.079212] usb-storage: waiting for device to settle before scanning
[ 6985.077177] usb-storage: device scan complete
[ 6985.079149] scsi 7:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2
[ 6985.079656] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 6985.085147] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 7520.015831] ip_tables: (C) 2000-2006 Netfilter Core Team
nekad imam zvuka, a nekad nemam... ne razumijem u cemu je problem!
pa za pocetak evo output od lspci ako nesto znaci nekome 
pa postam ovako: